ABSTRACT
Desalination of seawater and brackish water is becoming an increasingly important means to address the scarcity of fresh water resources in the world. Decreasing the energy requirements and infrastructure costs of existing desalination technologies remains a challenge. By enabling the manipulation of matter and control of transport at nanometer length scales, the emergence of nanotechnology offers new opportunities to advance water desalination technologies. This review focuses on nanostructured materials that are directly involved in the separation of water from salt as opposed to mitigating issues such as fouling. We discuss separation mechanisms and novel transport phenomena in materials including zeolites, carbon nanotubes, and graphene with potential applications to reverse osmosis, capacitive deionization, and multi-stage flash, among others. Such nanostructured materials can potentially enable the development of next-generation desalination systems with increased efficiency and capacity.
Subject(s)
Nanostructures/chemistry , Salinity , Salts/isolation & purification , Sodium Chloride/isolation & purification , Water Purification/methods , Nanostructures/ultrastructure , Osmosis , Phase TransitionABSTRACT
The aim of this study has been to develop a dynamic model of the knee joint after total knee replacement (TKR) to analyse the stress distribution in the distal femur during daily activities. Using MSC/ADAMS and MSC/MARC software, a dynamic model of an implanted knee joint has been developed. This model consists of the components of the knee prosthesis as well as the bones and ligaments of the knee. The femur, tibia, fibula, and patella have been modelled as mixed cortico-cancellous bone. The distal part of femur has been modelled as a flexible body with springs used to simulate the ligaments positioned at their anatomical insertion points. With this dynamic model a gait cycle was simulated. Stress shielding was identified in the distal femur after TKR, which is consistent with other investigators' results. Interestingly, higher stresses were found in the bone adjacent to the femoral component peg. This dynamic model can now be used to analyse the stress distribution in the distal femur with different load conditions. This will help to improve implant designs and will allow comparison of prostheses from different manufacturers.