Structural and functional spatial dynamics of microbial communities in aerated and non-aerated horizontal flow treatment wetlands.

A multiphasic study using structural and functional analyses was employed to investigate the spatial dynamics of the microbial community within five horizontal subsurface flow treatment wetlands (TWs) of differing designs in Germany. The TWs differed in terms of the depth of media saturation, presence of plants (Phragmites australis), and aeration. In addition to influent and effluent water samples, internal samples were taken at different locations (12.5 %, 25 %, 50 %, and 75 % of the fractional distance along the flow path) within each system. 16S rRNA sequencing was used for the investigation of microbial community structure and was compared to microbial community function and enumeration data. The microbial community structure in the unaerated systems was similar, but different from the aerated TW profiles. Spatial positioning along the flow path explained the majority of microbial community dynamics/differences within this study. This was mainly attributed to the availability of nutrients closer to the inlet which also regulated the fixed biofilm/biomass densities. As the amount of fixed biofilm decreased from the inlet to the TW outlets, structural diversity increased, suggesting different microbial communities were present to handle the more easily utilized/degraded pollutants near the inlet vs. the more difficult to degrade and recalcitrant pollutants closer to the outlets. This study also confirmed that effluent water samples do not accurately describe the microbial communities responsible for water treatment inside a TW, highlighting the importance of using internal samples for investigating microbial communities in TWs. The results of this study reinforce an existing knowledge gap regarding the potential for TW design modifications which incorporate microbial community spatial dynamics (heterogeneity). It is suggested that utilizing step-feeding could allow for improved water treatment within the same areal footprint, and modifications enhancing co-metabolic processes could assist in improving the treatment of more difficult to degrade or recalcitrant compounds such as micropollutants.

Assessing the performance and microbial community of hybrid moving bed and conventional membrane bioreactors treating municipal wastewater.

A conventional (SB-CMBR) and a hybrid moving-bed (SB-HMBR) sequencing batch membrane bioreactor treating municipal wastewater were compared during their start-up in terms of organic matter and nutrient removal, membrane fouling characteristics and microbial community. Both systems exhibited similar COD, ammonium, total nitrogen (TN) and phosphorus removal efficiency, amounting up to 96%, 99%, 70% and 85%, respectively. Results from cycle tests revealed that the contribution of attached biomass to the overall ammonium removal in the hybrid reactor was marginal. Moreover, higher despite the similar phosphorus removal efficiency attained in both reactors, nitrate-dosing activity batch assays specifically revealed that the anoxic phosphate uptake rate (PUR) in the SB-HMBR was 1.71 times higher than in the SB-CMBR. Moreover, a higher frequency of Candidatus Accumulibacter-related polyphosphate-accumulating organisms was observed in the biofilm carriers of the hybrid reactor. These findings may explain why the overall PUR was almost 50% higher in the SB-HMBR. By operating the reactors in sequencing batch mode, adhesion of particles on the membrane surface was reduced while fouling was mitigated as compared to continuous MBR systems. Better filterability conditions with lower fouling rate were found in the SB-HMBR, important features of the hybrid reactor for reducing membrane cleaning-related energy demand.