Estimation of the Human Extrathoracic Deposition Fraction of Inhaled Particles Using a Polyurethane Foam Collection Substrate in an IOM Sampler.

Extrathoracic deposition of inhaled particles (i.e., in the head and throat) is an important exposure route for many hazardous materials. Current best practices for exposure assessment of aerosols in the workplace involve particle size selective sampling methods based on particle penetration into the human respiratory tract (i.e., inhalable or respirable sampling). However, the International Organization for Standardization (ISO) has recently adopted particle deposition sampling conventions (ISO 13138), including conventions for extrathoracic (ET) deposition into the anterior nasal passage (ET1) and the posterior nasal and oral passages (ET2). For this study, polyurethane foam was used as a collection substrate inside an inhalable aerosol sampler to provide an estimate of extrathoracic particle deposition. Aerosols of fused aluminum oxide (five sizes, 4.9 µm-44.3 µm) were used as a test dust in a low speed (0.2 m/s) wind tunnel. Samplers were placed on a rotating mannequin inside the wind tunnel to simulate orientation-averaged personal sampling. Collection efficiency data for the foam insert matched well to the extrathoracic deposition convention for the particle sizes tested. The concept of using a foam insert to match a particle deposition sampling convention was explored in this study and shows promise for future use as a sampling device.

The effects of neutralized particles on the sampling efficiency of polyurethane foam used to estimate the extrathoracic deposition fraction.

In addition to chemical composition, the site of deposition of inhaled particles is important for determining the potential health effects from an exposure. As a result, the International Organization for Standardization adopted a particle deposition sampling convention. This includes extrathoracic particle deposition sampling conventions for the anterior nasal passages (ET1) and the posterior nasal and oral passages (ET2). This study assessed how well a polyurethane foam insert placed in an Institute of Occupational Medicine (IOM) sampler can match an extrathoracic deposition sampling convention, while accounting for possible static buildup in the test particles. In this way, the study aimed to assess whether neutralized particles affected the performance of this sampler for estimating extrathoracic particle deposition. A total of three different particle sizes (4.9, 9.5, and 12.8 µm) were used. For each trial, one particle size was introduced into a low-speed wind tunnel with a wind speed set a 0.2 m/s (∼40 ft/min). This wind speed was chosen to closely match the conditions of most indoor working environments. Each particle size was tested twice either neutralized, using a high voltage neutralizer, or left in its normal (non neutralized) state as standard particles. IOM samplers were fitted with a polyurethane foam insert and placed on a rotating mannequin inside the wind tunnel. Foam sampling efficiencies were calculated for all trials to compare against the normalized ET1 sampling deposition convention. The foam sampling efficiencies matched well to the ET1 deposition convention for the larger particle sizes, but had a general trend of underestimating for all three particle sizes. The results of a Wilcoxon Rank Sum Test also showed that only at 4.9 µm was there a statistically significant difference (p-value = 0.03) between the foam sampling efficiency using the standard particles and the neutralized particles. This is interpreted to mean that static buildup may be occurring and neutralizing the particles that are 4.9 µm diameter in size did affect the performance of the foam sampler when estimating extrathoracic particle deposition.

A comparison of the closed-face cassette at different orientations while measuring total particles.

The current method for sampling aerosols using the 37-mm closed-face cassette (CFC) sampler is based on the orientation of the cassette at ∼45° from horizontal. There is some concern as to whether this method is appropriate and may be underestimating exposures. An alternative orientation at ∼0° (horizontal) has been discussed. This research compared the CFC's orientation at 45° from horizontal to the proposed orientation at horizontal, 0° in a controlled laboratory setting. The particles used in this study were fused alumina oxide in four sizes, approximately 9.5 µm, 12.8 µm, 18 µm, and 44.3 µm in aerodynamic diameter. For each test, one aerosol was dispersed in a wind tunnel operating at 0.2 m/s with samplers mounted in the breathing zone of a rotating mannequin. A sampling event consisted of four pairs of samplers, placed side by side (one pair at 45° and another at 0° cassette orientation), and exposed for a period of 45 minutes. A total of 12 sampling events, 3 sample events per particle size, were conducted with a total of 94 samples collected. Mass concentration measurements were compared to assess the relationship between the sampler orientations of the cassettes. In addition, the relationship between the mass collected on the cassette filter and on the interior walls of the cassette was also assessed. The results indicated that there was no significant difference between the measured concentrations based on the orientation of the CFCs. The amount of mass collected on the interior walls of the cassettes was relatively low (<5%) compared to expected (up to 100%) wall losses for both orientations.

An analysis of OSHA inspections assessing contaminant exposures in general medical and surgical hospitals.

This study analyzed data from the Occupational Safety and Health Administration's (OSHA) Chemical Exposure Health Database to assess contaminant exposures in general medical and surgical hospitals. Seventy-five inspections conducted in these hospitals from 2005 through 2009 were identified. Five categories of inspections were conducted, the three most common being complaint-based, planned, and referral-based inspections. Complaint-based inspections comprised the majority of inspections-55 (73%) of the 75 conducted. The overall violation rate for all inspection types was 68%. This finding was compared to the violation rates of planned inspections (100%), referral-based inspections (83%), and complaint-based inspections (62%). Asbestos was the hazardous substance most commonly sampled and cited by OSHA in hospitals, with 127 samples collected during 24 inspections; 31% of the total 75 inspections resulting in one or more violations were due to asbestos.

Characterization of indoor air contaminants in a randomly selected set of commercial nail salons in Salt Lake County, Utah, USA.

Air samples were collected in 12 randomly selected commercial nail salons in Salt Lake County, Utah. Measurements of salon physical/chemical parameters (room volume, CO2 levels) were obtained. Volatile organic compound (VOC) concentrations were collected using summa air canisters and sorbent media tubes for an 8-h period. Multivariate analyses were used to identify relationships between salon physical/chemical characteristics and the VOCs found in the air samples. The ACGIH(®) additive mixing formula was also applied to determine if there were potential overexposures to the combined airborne concentrations of chemicals monitored. Methyl methacrylate was detected in 58% of the establishments despite having been banned for use in nail products by the state of Utah. Formaldehyde was found above the NIOSH REL(®) (0.016 ppm) in 58% of the establishments. Given the assortment of VOCs to which nail salon workers are potentially exposed, a combination of engineering as well as personal protective equipment is recommended.

Feasibility of community food item collection for the National Children's Study.

BACKGROUND: The National Children's Study proposes to investigate biological, chemical, physical, and psychosocial environmental exposures and their role on health outcomes in pregnant women and children. One specific area of concern is contaminant exposure through the ingestion of solid foods. National food contaminant databases may miss dietary exposures unique to specific communities and sources of food. OBJECTIVE: The purpose of this study was to evaluate the feasibility of community food item collection for the assessment of pesticide exposure in pregnant women and young children. METHODS: A prospective observational design was used to test the food collection protocol in mothers (n=45) of children aged 15-24 months in Salt Lake City, Utah. Foods for collection were based on: 1) frequency of different foods consumed by the target population as determined by the National Health and Nutrition Examination Survey data; 2) child food frequency questionnaire; and 3) likelihood of pesticide contamination in the foods. Assessment measures included: demographics, environmental health survey, quality assurance checklist, and participant evaluation form. RESULTS: An average of three food items were obtained from 44 households, yielding a collection rate of 97.8%. Overall, 100% of the food samples were rated as acceptable. Moreover, a vast majority of mothers reported that the study was not burdensome (95.5%) and that preparing the food sample was easy (93.2%). CONCLUSIONS: This study suggests that the community food item collection methodology shows promise as a low-burden approach for capturing dietary exposures on a household level, and appears to be a feasible tool for large population studies to assess dietary exposures unique to specific communities.

Determinants of low birth weight in urban Pakistan.

OBJECTIVE: To identify determinants of low birth weight (LBW) in Karachi, Pakistan, including environmental exposures and nutritional status of the mother during pregnancy. DESIGN: Cross-sectional study.ParticipantsFive hundred and forty mother-infant pairs. We interviewed mothers about obstetric history, diet and exposure to Pb. We measured birth weight and blood lead level (BLL). We performed multiple log binomial regression analysis to identify factors related to LBW. RESULTS: Of 540 infants, 100 (18.5 %) weighed 208.7 mg/d), infants of mothers with MUAC less than or equal to the median and dietary vitamin C intake >208.7 mg/d (adjPR = 10.80; 95 % CI 1.46, 79.76), mothers with MUAC above the median and vitamin C intake

Maternal nutritional status during pregnancy and surma use determine cord lead levels in Karachi, Pakistan.

OBJECTIVES: To estimate the umbilical cord blood lead levels (BLLs) of Pakistani neonates and to identify determinants for umbilical BLLs. METHODS: We conducted a cross-sectional study of mothers and infants at one of the two obstetric units of two tertiary care hospitals in Karachi during January-August 2005. Information from 540 mothers selected randomly from those registered for delivery was obtained about their pregnancy, diet, and current and past lead exposures. We collected umbilical cord blood for lead levels analyzed using graphite furnace atomic absorption spectrophotometry. We computed geometric and arithmetic means. We performed multiple linear regression analysis to identify factors associated with log-transformed umbilical cord BLLs. We also performed logistic regression analysis to identify determinants of high lead cord BLLs (10 microg/dl). RESULTS: The geometric mean cord BLL of the neonates was 9.6 microg/dl; arithmetic mean (S.D.) was 10.8 microg/dl (5.7) with a median of 9.7 microg/dl and a range of 1.8-48.9 microg/dl. Women who reported intake of less than 58.5mg of elemental iron supplement per day during pregnancy had cord BLL of 10.0 microg/dl; in comparison those women who had higher iron intake had lower cord BLL (8.4 microg/dl). Those who used surma (an eye cosmetic) daily had higher cord BLL (11.5 microg/dl) as compared to those who used it less frequently (9.4 microg/dl). In multivariable linear regression model, higher iron intake, owning a car, and being in 2nd quartile of mid-arm circumference were associated with low lead levels while father's occupation in lead-based industry was associated with significantly higher umbilical cord BLLs. There was interaction of daily surma use and ethnicity. Geometric mean BLLs were varied among surma users by ethnicity. CONCLUSIONS: Umbilical cord BLLs are high in Karachi, Pakistan, in comparison to those in developed countries such as United States. Measures are needed to reduce fetal lead exposure to prevent adverse affect on neurocognitive development. Association of low iron (below RDA of 60 mg per day) with high umbilical cord has implications for strengthening iron supplement intake during pregnancy. Umbilical cord BLLs differed among surma users by ethnicity.

Development of an HPLC method for simultaneous analysis of five antineoplastic agents.

Simultaneous analysis of common antineoplastic agents potentially hazardous to healthcare workers is of much interest for the evaluation of the overall health risk to these workers. Such analysis could be applied to both air and surface monitoring samples to provide a broader indication of risk to combinations of these agents. It was determined that the ability to simultaneously evaluate five frequently used, potentially hazardous agents was sufficient for general evaluation of exposures to healthcare workers. The approach used to select the five agents was to obtain a list of the agents used most frequently in both a cancer hospital and an outpatient cancer treatment center, then review the list to determine which agents were potentially more hazardous to human health. From these reviews, it was decided to attempt to develop an analytical method able to detect and quantify the presence of 5-fluorouracil, ifosfamide, cyclophosphamide, doxorubicin HCl, and paclitaxel. A reverse-phase high performance liquid chromatograph (HPLC) with a Waters Symmetry C8 column and a UV wavelength of 195 nm was selected for method development. The mobile phase was 22.75 percent acetonitrile in water buffered to a pH of 6.0. The HPLC analytical method developed is able to detect all five agents of interest, and at minimum detectable concentrations of 0.5-microgram/mL for each of the five agents.

A new monitoring method using solid sorbent media for evaluation of airborne cyclophosphamide and other antineoplastic agents.

Cyclophosphamide is a known human carcinogen. In July 1999, in a report at a conference on cytotoxic drugs in Sweden, it was indicated that cyclophosphamide (CP) was not effectively controlled by high efficiency particulate air (HEPA) filters.((1)) This then raised a concern that the existing air monitoring methods, which utilize polytetrafluoroethylene (a.k.a. PTFE, or Teflon) or glass fiber filters for evaluation of antineoplastics such as CP in air may also be ineffective for collection and quantification of such agents. It was decided that further evaluation of the existing filter method for monitoring antineoplastics in air be conducted. This evaluation determined that the filter method of monitoring was minimally effective for some antineoplastic agents, and that an alternate method of monitoring should be sought. The method subsequently developed utilizes a solid sorbent tube, Anasorb 708, a methacrylic acid polymer. Evaluation of this sorbent tube for adsorption and desorption properties found it had a greater than 90 percent recovery for both CP and ifosfamide. Other agents evaluated included 5-fluorouracil, doxorubicin, and paclitaxel. All three agents were able to be detected and measured by use of Anasorb 708 solid sorbent tube. Validation of the method was then conducted with air pulled through the tubes via attachment to an air manifold system at air flows ranging from 1.5 to approximately 4.0 liters per minute for up to 24 hours. This evaluation did validate the Anasorb 708 tube as an effective media for collection of airborne concentrations of CP from less than 1 microgram up to approximately 2 mg (2000 microgram) per tube. This corresponds to a concentration range of approximately 0.7 microgram/m(3) (0.0007 mg/m(3)) to 0.7 mg/m(3) in a 5.76 m(3) volume of air. This method can provide accurate information on airborne concentrations of CP for purposes of conducting risk assessments or evaluation of risk management methods.