ABSTRACT
A compact and fabrication-tolerant integrated remotely tunable optical delay line is proposed for millimeter-wave beam steering and is fabricated in an InP generic foundry. The proposed delay line is based on a spectrally cyclic-arrayed waveguide grating feedback loop. Its major features include the tolerant architecture with reduced chip size, and bi-directional operation with simplified remote tuning. Moreover, its cyclic feature guarantees further cascaded operations either for 2D radio beam steering or for high-resolution delay generation. The experimental results show less than 6.5-dB insertion loss of the integrated delay line. Five different delays from 0 to 71.6 ps are generated with less than 0.67-ps delay errors.
ABSTRACT
An anti-colliding pulse-type III-V-on-silicon passively mode-locked laser is presented for the first time based on a III-V-on-silicon distributed Bragg reflector as outcoupling mirror implemented partially underneath the III-V saturable absorber. Passive mode-locking at 4.83 GHz repetition rate generating 3 ps pulses is demonstrated. The generated fundamental RF tone shows a 1.7 kHz 3 dB linewidth. Over 9 mW waveguide coupled output power is demonstrated.
ABSTRACT
Picosecond-pulse III-V-on-silicon mode-locked lasers based on linear and ring extended cavity geometries are presented. In passive mode-locked operation a 12 kHz -3dB linewidth of the fundamental RF tone at 4.7 GHz is obtained for the linear cavity geometry and 16 kHz for the ring cavity geometry. Stabilization of the repetition rate of these devices using hybrid mode-locking is also demonstrated.
ABSTRACT
We present a linear self-referenced measurement of the spectral amplitude and phase of a free-running quantum-dash modelocked laser diode. The technique is suitable for measuring optical signals with repetition rates up to 100 GHz. In contrast to many other linear techniques it requires no external electronic clock synchronized to the signal under test. Using this method we are able to compensate for the intracavity dispersion of the diode to demonstrate 500 fs pulses at a repetition rate of 39.8 GHz. We also use the technique to characterize the dependence of the diode's intracavity dispersion on the applied current.
Subject(s)
Algorithms , Lasers, Solid-State , Spectrum Analysis/methods , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Feedback , Quantum TheoryABSTRACT
Performance improvement of a directly modulated 10 Gb/s OFDM system by optical injection of monolithically integrated lasers is shown experimentally over differing fibre lengths. The modulation and optical injection is performed using monolithically integrated Discrete Mode lasers. It is shown that optical injection with this device reduces third order inter-modulation distortion by up to 10dB and this results in an improvement in system performance from above a forward error correction BER threshold of 1 × 10(-3) to significantly below it.
