ABSTRACT
Heterogeneous catalysis, although known for over a century, is constantly improved and plays a key role in solving the present problems in chemical technology. Thanks to the development of modern materials engineering, solid supports for catalytic phases having a highly developed surface are available. Recently, continuous-flow synthesis started to be a key technology in the synthesis of high added value chemicals. These processes are more efficient, sustainable, safer and cheaper to operate. The most promising is the use of heterogeneous catalyst with column-type fixed-bed reactors. The advantages of the use of heterogeneous catalyst in continuous flow reactors are the physical separation of product and catalyst, as well as the reduction in inactivation and loss of the catalyst. However, the state-of-the-art use of heterogeneous catalysts in flow systems compared to homogenous ones remains still open. The lifetime of heterogeneous catalysts remains a significant hurdle to realise sustainable flow synthesis. The goal of this review article was to present a state of knowledge concerning the application of Supported Ionic Liquid Phase (SILP) catalysts dedicated for continuous flow synthesis.
ABSTRACT
As a result of strict regulations of phthalate plasticizers, alternative non-phthalate forms are desired and increasingly used. This work presents a synthetic method for alternative plasticizers (dialkyl succinates and adipates) via esterification of succinic and adipic acid with alcohols: butan-1-ol and 2-ethylhexan-1-ol. Ionic liquids were synthesized by the reaction of triethylamine with over-equimolar (1:2.7) amounts of sulfuric(VI) acid, which were used as an acidic catalyst and solvent. The two-phase liquid-liquid system was formed during the reaction due to immiscibility of the esters with the ionic liquid. This phenomenon is a driving force of this process, shifting the equilibrium toward the product formation. As a result, dialkyl succinates and adipates were obtained in high yields (99%) and selectivities (>99%), under mild reaction conditions at 70-80 °C and using a 4:1 molar ratio of alcohol to acid and 15 mol% of catalyst. The catalyst was recycled 10 times without any loss of activity. This alternative method is highly competitive: it involves a simple procedure for product isolation as well as a high yield and purity of the resulting esters. These advantages make this method sustainable and promising for industrial applications.
ABSTRACT
Following our previous studies on the molecular level structure of (co)oligoesters obtained via anionic homo- and co-polymerization of novel ß-substituted ß-lactones, prepared by the atmospheric pressure carbonylation reaction of respective epoxides, the boric acid biocatalyzed ring-opening (co)polymerization of δ-valerolactone has been studied. As a co-monomer the 6-methy-ε-caprolactone, prepared by the one-pot oxidation of respective alcohol, and ethylene glycol as polymerization initiator were used. The obtained copolymers were characterized by 1H-NMR, GPC and ESI-MS, respectively in order to confirm their chemical structures and identity. Subsequently, tandem mass spectrometry (MS-MS studies) via collision-induced dissociation were utilized to characterize the fragmentation pattern. ESI-MS and NMR analyses confirmed the formation of random linear copolymer chains composed of different polyester repeat units. MS-MS experiments showed that fragmentation proceeds via ester bound cleavage along the (co)polyester chains. The innovative aspect of this contribution is related to the elaboration of the telechelic (co)polymers end-capped with hydroxyl end groups and well-defined molecular architectures, which could facilitate the development of new flexible macromolecular systems for potential biomedical applications.
ABSTRACT
Based on MS analysis, the mechanism of the Baeyer-Villiger oxidation of cyclic ketones with hydrogen peroxide using metal triflates (Ga(OTf)3 and Er(OTf)3) as catalysts was proposed. In the case of cyclohexanone as a substrate, dimeric, trimeric and tetrameric peroxide structures were detected.
ABSTRACT
Low solubility of terephthalic acid in common solvents makes its industrial production very difficult and not environmentally benign. Ionic liquids are known for their extraordinary solvent properties, with capability to dissolve a wide variety of materials, from common solvents to cellulose, opening new possibilities to find more suitable solvents for terephthalic acid. This work presents studies on the solubility of terephthalic acid in ionic liquids, and demonstrates that terephthalic acid is soluble in ionic liquids, such as 1-ethyl-3-methylimidazolium diethylphosphate, 1-butyl-3-methylimidazolium acetate, and dialkylimidazolium chlorides up to four times higher than in DMSO. Additionally, the temperature effect and correlation of ionic liquid structure with solubility efficiency are discussed.
Subject(s)
Ionic Liquids/chemistry , Phthalic Acids/chemistry , Anions , Cations , Solubility , Solvents/chemistryABSTRACT
The first example of triflometallate ionic liquids, named in analogy to chlorometallate ionic liquids, is reported. Trifloaluminate ionic liquids, synthesized from 1-alkyl-3-methylimidazolium triflates and aluminum triflate, were characterized by multinuclear NMR spectroscopy and FT-IR spectroscopy, revealing the existence of oligonuclear, multiply-charged trifloaluminate anions, with multiple bridging triflate modes. Acceptor numbers were determined to quantify their Lewis acidity, rendering trifloaluminate ionic liquids as medium-strength Lewis acids (AN = ca. 65). Used as acidic catalysts in the cycloaddition of 2,4-dimethylphenol and isoprene (molar ratio 2:1) to prepare chromane, trifloaluminate systems outperformed literature systems, showing high activity (conversions 94-99%, selectivities 80-89%) and at low loadings (0.2 mol%) at 35°C. Using these new systems as supported ionic liquid phase (SILP) on multi-walled carbon nanotubes (ionic liquid loading 16 wt%) delivered a recyclable catalytic system, with activity enhanced with respect to the homogenous regime.
ABSTRACT
Coordination complexes of Lewis acidic metal chlorides AlCl3, GaCl3, InCl3, SbCl3, SnCl4, SnCl2, ZnCl2 and TiCl4 with trioctylphosphine (P888) and trioctylphosphine oxide (P888O) were synthesised. All compounds formed liquid coordination complexes (LCCs) at ambient temperature, although decomposition via a redox mechanism was detected in some cases. The Lewis acidity of the metal chlorides (measured in 1,2-dichloroethane solutions) and the LCCs (measured neat) was quantified by using the Gutmann acceptor number (AN) approach. In general, LCCs were equally or more Lewis acidic than the corresponding metal chlorides. The AN values were compared with the catalytic activity of selected LCCs in a model Diels-Alder reaction. Insight into speciation of LCCs was gained using multinuclear NMR spectroscopy, revealing that most LCCs comprised charge-neutral complexes rather than ionic ones. The relationship between the speciation, Lewis acidity (AN scale) and catalytic activity is discussed in detail. This approach reveals several new, promising catalytic systems, such as P888O-InCl3, with Lewis acidity enhanced compared to chloroindate ionic liquids, and P888O-TiCl4, with hydrolytic stability enhanced with respect to neat TiCl4.
