Porphyrin Metalation at the MgO Nanocube/Toluene Interface.

Molecular insights into porphyrin adsorption on nanostructured metal oxide surfaces and associated ion exchange reactions are key to the development of functional hybrids for energy conversion, sensing, and light emission devices. Here we investigated the adsorption of tetraphenyl-porphyrin (2HTPP) from toluene solution on two types of MgO powder. We compare MgO nanocubes with an average size d < 10 nm and MgO cubes with 10 nm ≤ d ≤ 1000 nm. Using molecular spectroscopy techniques such as UV/vis transmission and diffuse reflectance (DR), photoluminescence (PL), and diffuse reflectance infrared Fourier-transform (DRIFT) spectroscopy in combination with structural characterization techniques (powder X-ray diffraction and transmission electron microscopy, TEM), we identified a new room temperature metalation reaction that converts 2HTPP into magnesium tetraphenyl-porphyrin (MgTPP). Mg(2+) uptake from the MgO nanocube surfaces and the concomitant protonation of the oxide surface level off at a concentration that corresponds to roughly one monolayer equivalent adsorbed on the MgO nanocubes. Larger MgO cubes, in contrast, show suppressed exchange, and only traces of MgTPP can be detected by photoluminescence.

Molecular Orientation and Structural Transformations in Phthalic Anhydride Thin Films on MgO(100)/Ag(100).

Structural control of organic thin films on dielectric substrates is the key to tailoring the physical properties of hybrid materials, for example, for application in solar energy conversion, molecular electronics, or catalysis. In this work, we investigate the molecular orientation of phthalic anhydride (PAA) films on atomically well-defined MgO(100) on Ag(100) using temperature-programmed infrared reflection absorption spectroscopy (TP-IRAS) in combination with density-functional theory (DFT). A robust procedure is presented to determine the orientation of the PAA molecules, which relies on the intensity ratios of vibrational bands only. We show that even at deposition temperatures of 110 K, the PAA multilayer grows with a specific molecular orientation; that is, the PAA molecular plane is preferentially aligned parallel with the MgO surface. No change of molecular orientation occurs up to a temperature of 145 K. Between 145 and 160 K, the film restructures adopting a nearly flat-lying molecular orientation. Between 170 and 205 K, the film undergoes a second structural transition to a crystalline phase. This transition is associated with a pronounced molecular reorientation. The molecules adopt a tilted orientation and, simultaneously, rotate around their C2 axes. The reorientation behavior suggests that the molecular orientation in the crystalline phase is controlled by the interaction with the MgO(100) substrate. At higher temperature, no further restructuring is observed until the PAA multilayer desorbs at temperatures above 230 K.

Methanol steam reforming promoted by molten salt-modified platinum on alumina catalysts.

We herein describe a straight forward procedure to increase the performance of platinum-on-alumina catalysts in methanol steam reforming by applying an alkali hydroxide coating according to the "solid catalyst with ionic liquid layer" (SCILL) approach. We demonstrate by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature-programmed desorption (TPD) studies that potassium doping plays an important role in the catalyst activation. Moreover, the hygroscopic nature and the basicity of the salt modification contribute to the considerable enhancement in catalytic performance. During reaction, a partly liquid film of alkali hydroxides/carbonates forms on the catalyst/alumina surface, thus significantly enhancing the availability of water at the catalytically active sites. Too high catalyst pore fillings with salt introduce a considerable mass transfer barrier into the system as indicated by kinetic studies. Thus, the optimum interplay between beneficial catalyst modification and detrimental mass transfer effects had to be identified and was found on the applied platinum-on-alumina catalyst at KOH loadings around 7.5 mass%.

Interface controls spontaneous crystallization in thin films of the ionic liquid [C2C1Im][OTf] on atomically clean Pd(111).

A total of 5-30 monolayer thick films of the ionic liquid (IL) [C2C1Im][OTf] were vaporized in vacuo onto an atomically clean Pd(111) single crystal surface at 220 K. Time- and temperature-resolved infrared reflection-absorption spectroscopy reveals growth, interactions with the metallic support, and the macroscopic phase behavior of the layer. At 220 K, the IL layer first grows in the form of a glassy phase. Crystallization of the IL was witnessed above a critical thickness of about 10 monolayers. On the basis of the known bulk crystal structure of the IL, we suggest the formation of well-oriented checkerboard-like crystalline film structures on the surface. The preferential orientation manifested by the crystal phase with regard to the macroscopic metallic surface is attributed to strong interactions between anionic headgroups and the metal.

Model Catalytic Studies of Liquid Organic Hydrogen Carriers: Dehydrogenation and Decomposition Mechanisms of Dodecahydro-N-ethylcarbazole on Pt(111).

Liquid organic hydrogen carriers (LOHC) are compounds that enable chemical energy storage through reversible hydrogenation. They are considered a promising technology to decouple energy production and consumption by combining high-energy densities with easy handling. A prominent LOHC is N-ethylcarbazole (NEC), which is reversibly hydrogenated to dodecahydro-N-ethylcarbazole (H12-NEC). We studied the reaction of H12-NEC on Pt(111) under ultrahigh vacuum (UHV) conditions by applying infrared reflection-absorption spectroscopy, synchrotron radiation-based high resolution X-ray photoelectron spectroscopy, and temperature-programmed molecular beam methods. We show that molecular adsorption of H12-NEC on Pt(111) occurs at temperatures between 173 and 223 K, followed by initial C-H bond activation in direct proximity to the N atom. As the first stable dehydrogenation product, we identify octahydro-N-ethylcarbazole (H8-NEC). Dehydrogenation to H8-NEC occurs slowly between 223 and 273 K and much faster above 273 K. Stepwise dehydrogenation to NEC proceeds while heating to 380 K. An undesired side reaction, C-N bond scission, was observed above 390 K. H8-NEC and H8-carbazole are the dominant products desorbing from the surface. Desorption occurs at higher temperatures than H8-NEC formation. We show that desorption and dehydrogenation activity are directly linked to the number of adsorption sites being blocked by reaction intermediates.

Interactions of imidazolium-based ionic liquids with oxide surfaces controlled by alkyl chain functionalization.

From a different angle: Thin films of functionalized ionic liquids are deposited on cerium oxides following a surface science approach. The functionalization of the alkyl chain changes its orientation with respect to the surface plane from normal to parallel. This then leads to a different surface chemistry at higher temperatures.

Dehydrogenation mechanism of liquid organic hydrogen carriers: dodecahydro-N-ethylcarbazole on Pd(111).

Dodecahydro-N-ethylcarbazole (H12-NEC) has been proposed as a potential liquid organic hydrogen carrier (LOHC) for chemical energy storage, as it combines both favourable physicochemical and thermodynamic properties. The design of optimised dehydrogenation catalysts for LOHC technology requires a detailed understanding of the reaction pathways and the microkinetics. Here, we investigate the dehydrogenation mechanism of H12-NEC on Pd(111) by using a surface-science approach under ultrahigh vacuum conditions. By combining infrared reflection-absorption spectroscopy, density functional theory calculations and X-ray photoelectron spectroscopy, surface intermediates and their stability are identified. We show that H12-NEC adsorbs molecularly up to 173 K. Above this temperature (223 K), activation of C-H bonds is observed within the five-membered ring. Rapid dehydrogenation occurs to octahydro-N-ethylcarbazole (H8-NEC), which is identified as a stable surface intermediate at 223 K. Above 273 K, further dehydrogenation of H8-NEC proceeds within the six-membered rings. Starting from clean Pd(111), C-N bond scission, an undesired side reaction, is observed above 350 K. By complementing surface spectroscopy, we present a temperature-programmed molecular beam experiment, which permits direct observation of dehydrogenation products in the gas phase during continuous dosing of the LOHC. We identify H8-NEC as the main product desorbing from Pd(111). The onset temperature for H8-NEC desorption is 330 K, the maximum reaction rate is reached around 550 K. The fact that preferential desorption of H8-NEC is observed even above the temperature threshold for H8-NEC dehydrogenation on the clean surface is attributed to the presence of surface dehydrogenation and decomposition products during continuous reactant exposure.

Functionalization of Oxide Surfaces through Reaction with 1,3-Dialkylimidazolium Ionic Liquids.

Practical applications of ionic liquids (ILs) often involve IL/oxide interfaces, but little is known regarding their interfacial chemistry. The unusual physicochemical properties of ILs, including their exceptionally low vapor pressure, provide access to such interfaces using a surface science approach in ultrahigh vacuum (UHV). We have applied synchrotron radiation photoelectron spectroscopy (SR-PES) to the study of a thin film of the ionic liquid [C6C1Im][Tf2N] prepared in situ in UHV on ordered stoichiometric CeO2(111) and partially reduced CeO2-x. On the partially reduced surface, we mostly observe decomposition of the anion. On the stoichiometric CeO2(111) surface, however, a layer of surface-anchored organic products with high thermal stability is formed upon reaction of the cation. The suggested acid-base reaction pathway may provide well-defined functionalized IL/solid interfaces on basic oxides.

Preparation and characterization of ultrathin [Ru(CO)3Cl2]2 and [BMIM][Tf2N] films on Al2O3/NiAl(110) under UHV conditions.

Towards a better understanding of the interface chemistry of ionic liquid (IL) thin film catalytic systems we have applied a rigorous surface science model approach. For the first time, a model homogeneous catalyst has been prepared under ultrahigh vacuum conditions. The catalyst, di-µ-chlorobis(chlorotricarbonylruthenium) [Ru(CO)(3)Cl(2)](2), and the solvent, the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N], have been deposited by physical vapor deposition onto an alumina model support [Al(2)O(3)/NiAl(110)]. First, the interaction between thin films of [Ru(CO)(3)Cl(2)](2) and the support is investigated. Then, the ruthenium complex is co-deposited with the IL and the influence of the solvent on the catalyst is discussed. D(2)O, which is a model reactant, is further added. Growth, surface interactions, and mutual interactions in the thin films are studied with IRAS in combination with density functional (DFT) calculations. At 105 K, molecular adsorption of [Ru(CO)(3)Cl(2)](2) is observed on Al(2)O(3)/NiAl(110). The IRAS spectra of the binary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] and ternary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] + D(2)O show every characteristic band of the individual components. Above 223 K, partial decomposition of the ruthenium complex leads to species of molecular nature attributed to Ru(CO) and Ru(CO)(2) surface species. Formation of metallic ruthenium clusters occurs above 300 K and the model catalyst decomposes further at higher temperatures. Neither the presence of the IL nor of D(2)O prevents this partial decomposition of [Ru(CO)(3)Cl(2)](2) on alumina.

Surface-functionalized ionic liquid crystal-supported ionic liquid phase materials: ionic liquid crystals in mesopores.

The influence of confinement on the ionic liquid crystal (ILC) [C(18)C(1)Im][OTf] is studied using differential scanning calorimetry (DSC), polarized optical microscopy (POM), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The ILC studied is supported on Si-based powders and glasses with pore sizes ranging from 11 to 50 nm. The temperature of the solid-to-liquid-crystalline phase transition seems mostly unaffected by the confinement, whereas the temperature of the liquid-crystalline-to-liquid phase transition is depressed for smaller pore sizes. A contact layer with a thickness in the order of 2 nm is identified. The contact layer exhibits a phase transition at a temperature 30 K lower than the solid-to-liquid-crystalline phase transition observed for the neat ILC. For applications within the "supported ionic liquid phase (SILP)" concept, the experiments show that in pores of diameter 50 nm a pore filling of α>0.4 is sufficient to reproduce the phase transitions of the neat ILC.

Dehydrogenation of dodecahydro-N-ethylcarbazole on Pd/Al2O3 model catalysts.

To elucidate the dehydrogenation mechanism of dodecahydro-N-ethylcarbazole (H(12)-NEC) on supported Pd catalysts, we have performed a model study under ultra high vacuum (UHV) conditions. H(12)-NEC and its final dehydrogenation product, N-ethylcarbazole (NEC), were deposited by physical vapor deposition (PVD) at temperatures between 120 K and 520 K onto a supported model catalyst, which consisted of Pd nanoparticles grown on a well-ordered alumina film on NiAl(110). Adsorption and thermally induced surface reactions were followed by infrared reflection absorption spectroscopy (IRAS) and high-resolution X-ray photoelectron spectroscopy (HR-XPS) in combination with density functional theory (DFT) calculations. It was shown that, at 120 K, H(12)-NEC adsorbs molecularly both on the Al(2)O(3)/NiAl(110) support and on the Pd particles. Initial activation of the molecule occurs through C-H bond scission at the 8a- and 9a-positions of the carbazole skeleton at temperatures above 170 K. Dehydrogenation successively proceeds with increasing temperature. Around 350 K, breakage of one C-N bond occurs accompanied by further dehydrogenation of the carbon skeleton. The decomposition intermediates reside on the surface up to 500 K. At higher temperatures, further decay to small fragments and atomic species is observed. These species block most of the absorption sites on the Pd particles, but can be oxidatively removed by heating in oxygen at 600 K, fully restoring the original adsorption properties of the model catalyst.

Controlling the adsorption kinetics via nanostructuring: Pd nanoparticles on TiO2 nanotubes.

Activity and selectivity of supported catalysts critically depend on transport and adsorption properties. Combining self-organized porous oxide films with different metal deposition techniques, we have prepared novel Pd/TiO(2) catalysts with a new level of structural control. It is shown that these systems make it possible to tune adsorption kinetics via their nanostructure. Self-organized TiO(2) nanotubular arrays (TiNTs) prepared by electrochemical methods are used as a support, on which Pd particles are deposited. Whereas physical vapor deposition (PVD) in ultrahigh vacuum (UHV) allows us to selectively grow Pd particles at the tube orifice, Pd/TiNT systems with homogeneously distributed Pd aggregates inside the tubes are available by particle precipitation (PP) from solution. Both methods also provide control over particle size and loading. Using in-situ infrared reflection absorption spectroscopy (IRAS) and molecular beam (MB) methods, we illustrate the relation between the nanostructure of the Pd/TiNT systems and their adsorption kinetics. Control over the metal nanoparticle distribution in the nanotubes leads to drastic differences in adsorption probability and saturation behavior. These differences are rationalized based on differences in surface and gas phase transport resulting from their nanostructure. The results suggest that using carefully designed metal/TiNT systems it may be possible to tailor transport processes in catalytically active materials.

Ionic liquid based model catalysis: interaction of [BMIM][Tf2N] with Pd nanoparticles supported on an ordered alumina film.

Towards a better understanding of novel catalytic materials consisting of supported noble metal catalysts modified by an ionic liquid (IL) film, we have performed a study under ultrahigh-vacuum (UHV) conditions. The model surface consists of Pd nanoparticles grown in UHV on an ordered alumina film on NiAl(110). Thin films of the room temperature IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N] are deposited onto this surface by means of physical vapor deposition (PVD). The interaction of the IL with clean and CO-covered Pd/Al(2)O(3)/NiAl(110) at 300 K and the thermal behavior of the deposited IL films on Pd/Al(2)O(3)/NiAl(110) are investigated by time-resolved infrared reflection absorption spectroscopy (TR-IRAS) and X-ray photoelectron spectroscopy (XPS). At 300 K, the IL adsorbs molecularly both onto the Pd particles and onto the alumina. The IR spectra suggest that the [Tf(2)N](-) anions interact with Pd sites preferentially via the sulfonyl groups. CO pre-adsorbed on the Pd particles is partially displaced by the IL, even at 300 K, and only the part of CO adsorbed onto hollow sites on (111) facets of the Pd particles remains in place. Upon heating to temperatures higher than the desorption temperature of the IL (>400 K), molecular desorption of the IL competes with decomposition. The decomposition products, atomic species and small fragments, remain preferentially adsorbed onto the Pd nanoparticles and strongly modify their surface properties. Most of the decomposition products originate from the [BMIM](+) cations, whereas the [Tf(2)N](-) anions desorb for the most part.

Toward ionic-liquid-based model catalysis: growth, orientation, conformation, and interaction mechanism of the [Tf2N]- anion in [BMIM][Tf2N] thin films on a well-ordered alumina surface.

Aiming at a better understanding of the interaction of ionic liquid (IL) thin films with oxide supports, we have performed a model study under ultrahigh vacuum (UHV) conditions. We apply infrared reflection absorption spectroscopy (IRAS) in combination with density functional theory (DFT). Thin films of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N] are grown on an atomically flat, well-ordered alumina film on NiAl(110) using a novel UHV-compatible evaporator. Time-resolved IRAS measured during the growth and subsequent thermal desorption points toward reversible molecular adsorption and desorption. There was no indication of decomposition. The vibrational bands are assigned with the help of DFT calculations. Strong relative intensity changes in individual [Tf(2)N](-) bands are observed in the monolayer region. This indicates pronounced orientation effects for the anion. The adsorption geometry of [Tf(2)N](-) is determined on the basis of a detailed comparison with DFT. The results suggest that [Tf(2)N](-) anions adopt a cis conformation in the submonolayer region. They adsorb in a slightly tilted orientation with respect to the surface, mainly interacting with the support via the sulfonyl groups.

Interaction of NO2 with model NSR catalysts: metal-oxide interaction controls initial NOx storage mechanism.

Using scanning tunneling microscopy (STM), molecular-beam (MB) methods and time-resolved infrared reflection absorption spectroscopy (TR-IRAS), we investigate the mechanism of initial NO(x) uptake on a model nitrogen storage and reduction (NSR) catalyst. The model system is prepared by co-deposition of Pd metal particles and Ba-containing oxide particles onto an ordered alumina film on NiAl(110). We show that the metal-oxide interaction between the active noble metal particles and the NO(x) storage compound in NSR model catalysts plays an important role in the reaction mechanism. We suggest that strong interaction facilitates reverse spillover of activated oxygen species from the NO(x) storage compound to the metal. This process leads to partial oxidation of the metal nanoparticles and simultaneous stabilization of the surface nitrite intermediate.