Role of Cu Oxide and Cu Adatoms in the Reactivity of CO2 on Cu(110).

We investigate the interaction of CO2 with metallic and oxidized Cu(110) surfaces using a combination of near-ambient pressure scanning tunneling microscopy (NAP-STM) and theoretical calculations. While the Cu(110) and full CuO films are inert, the interface between bare Cu(110) and the CuO film is observed to react instantly with CO2 at a 10 mbar pressure. The reaction is observed to proceed from the interfacial sites of CuO/Cu(110). During reaction with CO2, the CuO/Cu(110) interface releases Cu adatoms which combine with CO3 to produce a variety of added Cu-CO3 structures, whose stability depends on the gas pressure of CO2. A main implication for the reactivity of Cu(110) is that Cu adatoms and highly undercoordinated CuO segments are created on the Cu(110) surface through the interaction with CO2, which may act as reaction-induced active sites. In the case of CO2 hydrogenation to methanol, our theoretical assessment of such sites indicates that their presence may significantly promote CH3OH formation. Our study thus implies that the CuO/Cu(110) interfacial system is highly dynamic in the presence of CO2, and it suggests a possible strong importance of reaction-induced Cu and CuO sites for the surface chemistry of Cu(110) in CO2-related catalysis.

Visualizing the gas-sensitive structure of the CuZn surface in methanol synthesis catalysis.

Methanol formation over Cu/ZnO catalysts is linked with a catalytically active phase created by contact between Cu nanoparticles and Zn species whose chemical and structural state depends on reaction conditions. Herein, we use variable-temperature scanning tunneling microscopy at elevated pressure conditions combined with X-ray photoelectron spectroscopy measurements to investigate the surface structures and chemical states that evolve when a CuZn/Cu(111) surface alloy is exposed to reaction gas mixtures. In CO2 hydrogenation conditions, Zn stays embedded in the CuZn surface, but once CO gas is added to the mixture, the Zn segregates onto the Cu surface. The Zn segregation is CO-induced, and establishes a new dynamic state of the catalyst surface where Zn is continually exchanged at the Cu surface. Candidates for the migrating few-atom Zn clusters are further identified in time-resolved imaging series. The findings point to a significant role of CO affecting the distribution of Zn in the multiphasic ZnO/CuZn/Cu catalysts.

A Monolayer Carbon Nitride on Au(111) with a High Density of Single Co Sites.

Carbon nitrides that expose atomically dispersed single-atom metals in the form of M-N-C (M = metal) sites are attractive earth-abundant catalyst materials that have been demonstrated in electrocatalytic conversion reactions. The catalytic performance is determined by the abundance of N-doped sites and the type of metal coordination to N, but challenges remain to synthesize pristine carbon nitrides with a high concentration of the most active sites and prepare homogeneously doped materials that allow for in-depth characterization of the M-N-C sites and quantitative evaluation of their catalytic performance. Herein, we have synthesized and characterized a well-defined monolayer carbon nitride phase on a Au(111) surface that exposes an exceedingly high concentration of Co-N4 sites. The crystalline monolayer carbon nitride, whose formation is controlled by an on-surface reaction between Co atoms and melamine on Au(111), is characterized by a dense array of 4- and 6-fold N-terminated pockets, whereof only the 4-fold pocket is found to be holding Co atoms. Through detailed characterization using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory modeling, we determine the atomic structure and chemical state of the carbon nitride network. Furthermore, we show that the monolayer carbon nitride structure is stable and reactive toward the electrocatalytic oxygen reduction reaction in alkaline electrolyte, with a quantitative performance metric that significantly exceeds comparable M-N-C-based catalyst types. The work demonstrates that high-density active catalytic sites can be created using common precursor materials, and the formed networks themselves offer an excellent platform for onward studies addressing the characteristics of M-N-C sites.

Origin of hydroxyl pair formation on reduced anatase TiO2(101).

The interaction of water with metal oxide surfaces is of key importance to several research fields and applications. Because of its ability to photo-catalyze water splitting, reducible anatase TiO2 (a-TiO2) is of particular interest. Here, we combine experiments and theory to study the dissociation of water on bulk-reduced a-TiO2(101). Following large water exposures at room temperature, point-like protrusions appear on the a-TiO2(101) surface, as shown by scanning tunneling microscopy (STM). These protrusions originate from hydroxyl pairs, consisting of terminal and bridging OH groups, OHt/OHb, as revealed by infrared reflection absorption spectroscopy (IRRAS) and valence band experiments. Utilizing density functional theory (DFT) calculations, we offer a comprehensive model of the water/a-TiO2(101) interaction. This model also explains why the hydroxyl pairs are thermally stable up to ∼480 K.

The interface ofin-situgrown single-layer epitaxial MoS2on SrTiO3(001) and (111).

SrTiO3(STO) is a versatile substrate with a high dielectric constant, which may be used in heterostructures with 2D materials, such as MoS2, to induce interesting changes to the electronic structure. STO single crystal substrates have previously been shown to support the growth of well-defined epitaxial single-layer (SL) MoS2crystals. The STO substrate is already known to renormalize the electronic bandgap of SL MoS2, but the electronic nature of the interface and its dependence on epitaxy are still unclear. Herein, we have investigated anin-situphysical vapor deposition (PVD) method, which could eliminate the need for ambient transfer between substrate preparation, subsequent MoS2growth and surface characterization. Based on this, we then investigate the structure and epitaxial alignment of pristine SL MoS2in various surface coverages grown on two STO substrates with a different initial surface lattice, the STO(001)(4 × 2) and STO(111)-(9/5 × 9/5) reconstructed surfaces, respectively. Scanning tunneling microscopy shows that epitaxial alignment of the SL MoS2is present for both systems, reflected by orientation of MoS2edges and a distinct moiré pattern visible on the MoS2(0001) basal place. Upon increasing the SL MoS2coverage, the presence of four distinct rotational domains on the STO(001) substrate, whilst only two on STO(111), is seen to control the possibilities for the formation of coherent MoS2domains with the same orientation. The presented methodology relies on standard PVD in ultra-high vacuum and it may be extended to other systems to help explore pristine two-dimensional transition metal dichalcogenide/STO systems in general.

The cobalt oxidation state in preferential CO oxidation on CoOx/Pt(111) investigated by operando X-ray photoemission spectroscopy.

The combination of a reducible transition metal oxide and a noble metal such as Pt often leads to active low-temperature catalysts for the preferential oxidation of CO in excess H2 gas (PROX reaction). While CO oxidation has been investigated for such systems in model studies, the added influence of hydrogen gas, representative of PROX, remains less explored. Herein, we use ambient pressure scanning tunneling microscopy and ambient pressure X-ray photoelectron spectroscopy on a CoOx/Pt(111) planar model catalyst to analyze the active phase and the adsorbed species at the CoOx/Pt(111) interface under atmospheres of CO and O2 with a varying partial pressure of H2 gas. By following the evolution of the Co oxidation state as the catalyst is brought to a reaction temperature of above 150 °C, we determine that the active state is characterized by the transformation from planar CoO with Co in the 2+ state to a mixed Co2+/Co3+ phase at the temperature where CO2 production is first observed. Furthermore, our spectroscopy observations of the surface species suggest a reaction pathway for CO oxidation, proceeding from CO exclusively adsorbed on Co2+ sites reacting with the lattice O from the oxide. Under steady state CO oxidation conditions (CO/O2), the mixed oxide phase is replenished from oxygen incorporating into cobalt oxide nanoislands. In CO/O2/H2, however, the onset of the active Co2+/Co3+ phase formation is surprisingly sensitive to the H2 pressure, which we explain by the formation of several possible hydroxylated intermediate phases that expose both Co2+ and Co3+. This variation, however, has no influence on the temperature where CO oxidation is observed. Our study points to the general importance of a dynamic reducibility window of cobalt oxide, which is influenced by hydroxylation, and the bonding strength of CO to the reduced oxide phase as important parameters for the activity of the system.

Water dissociation on mixed Co-Fe oxide bilayer nanoislands on Au(111).

We investigate the hydroxylation behaviour of mixed Co-Fe oxide nanoislands synthesized on a Au(111) surface under exposure to water vapour at vacuum conditions. The pure Co and Fe bilayer oxides both become hydroxylated by water exposure in vacuum conditions, albeit to a very different extent. It is however an open question how mixed oxides, exposing sites with a mixed coordination to Fe and Co, behave. By forming surface O species with a mixed Fe/Co coordination, we can investigate the nature of such sites. By means of scanning tunnelling microscopy and x-ray photoelectron spectroscopy, we characterize a series of Co-Fe oxides samples with different Fe contents at the atomic scale and observe a scaling of the hydroxylation degree with the amount of Fe inside the Co-Fe oxides. Our results indicate that the Fe dopants within the Co-Fe oxides have opposing effects on edge and basal plane sites modifying the maximum hydroxylation degree of pure cobalt oxide, perturbing the original binding sites of H, releasing the absorbed H or blocking the diffusion pathway of H.

Electrically Tunable Reactivity of Substrate-Supported Cobalt Oxide Nanocrystals.

First-row transition metal oxides are promising materials for catalyzing the oxygen evolution reaction. Surface sensitive techniques provide a unique perspective allowing the study of the structure, adsorption sites, and reactivity of catalysts at the atomic scale, which furnishes rationalization and improves the design of highly efficient catalytic materials. Here, a scanning probe microscopy study complemented by density functional theory on the structural and electronic properties of CoO nanoislands grown on Au(111) is reported. Two distinct phases are observed: The most extended displays a Moiré pattern (α-region), while the less abundant is 1Co:1Au coincidental (ß-region). As a result of the surface registry, in the ß-region the oxide adlayer is compressed by 9%, increasing the unoccupied local density of states and enhancing the selective water adsorption at low temperature through a cobalt inversion mechanism. Tip-induced voltage pulses irreversibly transform α- into ß-regions, thus opening avenues to modify the structure and reactivity of transition metal oxides by external stimuli like electric fields.

The Effect of Fe Dopant Location in Co(Fe)OOHx Nanoparticles for the Oxygen Evolution Reaction.

The addition of iron (Fe) can in certain cases have a strong positive effect on the activity of cobalt and nickel oxide nanoparticles in the electrocatalytic oxygen evolution reaction (OER). The reported optimal Fe dopant concentrations are, however, inconsistent, and the origin of the increased activity due to Fe dopants in mixed oxides has not been identified so far. Here, we combine density functional theory calculations, scanning tunneling microscopy, and OER activity measurements on atomically defined Fe-doped Co oxyhydroxide nanoparticles supported on a gold surface to establish the link between the activity and the Fe distribution and concentration within the oxyhydroxide phase. We find that addition of Fe results in distinct effects depending on its location on edge or basal plane sites of the oxyhydroxide nanoparticles, resulting in a nonlinear OER activity as a function of Fe content. Fe atom substitution itself does not lead to intrinsically more active OER sites than the best Co sites. Instead, the sensitivity to Fe promoter content is explained by the strong preference for Fe to locate on the most active edge sites of oxyhydroxide nanoparticles, which for low Fe concentrations stabilizes the particles but in higher concentrations leads to a shell structure with less active Fe on all edge positions. The optimal Fe content thereby becomes dependent on nanoparticle size. Our findings demonstrate that synthesis strategies that adjust not only the Fe concentration in mixed oxides but also its distribution within a catalyst nanoparticle can lead to enhanced OER performance.

A versatile electrochemical cell for hanging meniscus or flow cell measurement of planar model electrodes characterized with scanning tunneling microscopy and x-ray photoelectron spectroscopy.

We demonstrate the development of a portable electrochemistry (EC) cell setup that can be applied to measure relevant electrochemical signals on planar samples in conjunction with pre- and post-characterization by surface science methods, such as scanning tunneling microscopy and x-ray photoelectron spectroscopy. The EC cell setup, including the transfer and EC cell compartments, possesses the advantage of a small size and can be integrated with standard ultra-high vacuum (UHV) systems or synchrotron end-stations by replacing the flange adaptor, sample housing, and transfer arm. It allows a direct transfer of the pre-characterized planar sample from the UHV environment to the EC cell to conduct in situ electrochemical measurements without exposing to ambient air. The EC cell setup can operate in both the hanging meniscus and flow cell mode. As a proof of concept, using a Au(111) single crystal electrode, we demonstrate the application of the EC cell setup in both modes and report on the post-EC structure and chemical surface composition as provided by scanning tunneling microscopy and x-ray photoelectron spectroscopy. To exemplify the advantage of an in situ EC cell, the EC cell performance is further compared to a corresponding experiment on a Au(111) sample measured by transfer at ambient conditions. The EC cell demonstrated here enables a wealth of future electrocatalysis measurements that combine surface science model catalyst approaches to facilitate the understanding of nano- and atomic-scale structures of electrocatalytic interfaces, the crucial role of catalyst stability, and the nature of low-concentration and atomically dispersed metal (single atom) dopants.

Size-dependent phase stability in transition metal dichalcogenide nanoparticles controlled by metal substrates.

Nanomaterials based on MoS2 and related transition metal dichalcogenides (TMDCs) are remarkably versatile; MoS2 nanoparticles are proven catalysts for processes such as hydrodesulphurization and the hydrogen evolution reaction, and transition metal dichalcogenides in general have recently emerged as novel 2D components for nanoscale electronics and optoelectronics. The properties of such materials are intimately related to their structure and dimensionality. For example, only the edges exposed by MoS2 nanoparticles (NPs) are catalytically active, and extended MoS2 systems show different character (direct or indirect gap semiconducting, or metallic) depending on their thickness and crystallographic phase. In this work, we show how particle size and interaction with a metal surface affect the stability and properties of different MoS2 NPs and the resulting phase diagrams. By means of calculations based on the Density Functional Theory (DFT), we address how support interactions affect MoS2 nanoparticles of varying size, composition, and structure. We demonstrate that interaction with Au modifies the relative stability of the different nanoparticle types so that edge terminations and crystallographic phases that are metastable for free-standing nanoparticles and monolayers are expressed in the supported system. These support-effects are strongly size-dependent due to the mismatch between Au and MoS2 lattices, which explains experimentally observed transitions in the structural phases for supported MoS2 NPs. Accounting for vdW interactions and the contraction of the Au(111) surface underneath the MoS2 is further found to be necessary for quantitatively reproducing experimental results. We finally find that support-induced effects on the stability of nanoparticle structures are general to TMDC nanoparticles on metal surfaces, which we demonstrate also for MoS2 on Au(111), WS2 on Au(111), and WS2 on Ag(111). This work demonstrates how the properties of nanostructured transition metal dichalcogenides and similar layered systems can be modified by the choice of supporting metal.

Lateral Interfaces between Monolayer MoS2 Edges and Armchair Graphene Nanoribbons on Au(111).

The realization of electronic devices based on heterostructures of metallic, semiconducting, or insulating two-dimensional materials relies on the ability to form structurally coherent and clean interfaces between them, vertically or laterally. Lateral two-dimensional heterostructures that fuse together two different materials in a well-controlled manner have attracted recent attention, but the methods to form seamless interfaces between structurally dissimilar materials, such as graphene and transition-metal dichalcogenides (TMDCs), are still limited. Here, we investigate the structure of the lateral interfaces that arise between monolayer MoS2 flakes on Au(111) and two families of armchair graphene nanoribbons (GNRs) created through on-surface assisted Ullmann coupling using regular organobromine precursors for GNR synthesis. We find that parallel alignment between the GNR armchair edge and MoS2 leads to van der Waals bonded nanoribbons, whereas a perpendicular orientation is characterized by a single phenyl-group of the GNR covalently bonded to S on the edge. The edge-on bonding is facilitated by a hydrogen treatment of the MoS2, and temperature control during growth is shown to influence the nanoribbon width and the yield of covalently attached nanoribbons. Interestingly, the temperatures needed to drive the intramolecular dehydrogenation during GNR formation are lowered significantly by the presence of MoS2, which we attribute to enhanced hydrogen recombination at the MoS2 edges. These results are a demonstration of a viable method to make laterally bonded graphene nanostructures to TMDCs to be used in further investigations of two-dimensional heterostructure junctions.

Site-dependent reactivity of MoS2 nanoparticles in hydrodesulfurization of thiophene.

The catalytically active site for the removal of S from organosulfur compounds in catalytic hydrodesulfurization has been attributed to a generic site at an S-vacancy on the edge of MoS2 particles. However, steric constraints in adsorption and variations in S-coordination means that not all S-vacancy sites should be considered equally active. Here, we use a combination of atom-resolved scanning probe microscopy and density functional theory to reveal how the generation of S-vacancies within MoS2 nanoparticles and the subsequent adsorption of thiophene (C4H4S) depends strongly on the location on the edge of MoS2. Thiophene adsorbs directly at open corner vacancy sites, however, we find that its adsorption at S-vacancy sites away from the MoS2 particle corners leads to an activated and concerted displacement of neighboring edge S. This mechanism allows the reactant to self-generate a double CUS site that reduces steric effects in more constrained sites along the edge.

Molecular Nanowire Bonding to Epitaxial Single-Layer MoS2 by an On-Surface Ullmann Coupling Reaction.

Lateral heterostructures consisting of 2D transition metal dichalcogenides (TMDCs) directly interfaced with molecular networks or nanowires can be used to construct new hybrid materials with interesting electronic and spintronic properties. However, chemical methods for selective and controllable bond formation between 2D materials and organic molecular networks need to be developed. As a demonstration of a self-assembled organic nanowire-TMDC system, a method to link and interconnect epitaxial single-layer MoS2 flakes with organic molecules is demonstrated. Whereas pristine epitaxial single-layer MoS2 has no affinity for molecular attachment, it is found that single-layer MoS2 will selectively bind the organic molecule 2,8-dibromodibenzothiophene (DBDBT) in a surface-assisted Ullmann coupling reaction when the MoS2 has been activated by pre-exposing it to hydrogen. Atom-resolved scanning tunneling microscopy (STM) imaging is used to analyze the bonding of the nanowires, and thereby it is revealed that selective bonding takes place on a specific S atom at the corner site between the two types of zig-zag edges available in a hexagonal single layer MoS2 sheet. The method reported here successfully combining synthesis of epitaxial TMDCs and Ullmann coupling reactions on surfaces may open up new synthesis routes for 2D organic-TMDC hybrid materials.

Adsorption and reaction of methanol on Fe3O4(001).

The interaction of methanol with iron oxide surfaces is of interest due to its potential in hydrogen storage and from a fundamental perspective as a chemical probe of reactivity. We present here a study examining the adsorption and reaction of methanol on magnetite Fe3O4(001) at cryogenic temperatures using a combination of temperature programmed desorption, x-ray photoelectron spectroscopy, and scanning tunneling microscopy. The methanol desorption profile from Fe3O4(001) is complex, exhibiting peaks at 140 K, 173 K, 230 K, and 268 K, corresponding to the desorption of intact methanol, as well as peaks at 341 K and 495 K due to the reaction of methoxy intermediates. The saturation of a monolayer of methanol corresponds to ∼5 molecules/unit cell (u.c.), which is slightly higher than the number of surface octahedral iron atoms of 4/u.c. We probe the kinetics and thermodynamics of the desorption of molecular methanol using inversion analysis. The deconvolution of the complex desorption profile into individual peaks allows for calculations of both the desorption energy and the prefactor of each feature. The initial 0.7 methanol/u.c. reacts to form methoxy and hydroxy intermediates at 180 K, which remain on the surface above room temperature after intact methanol has desorbed. The methoxy species react via one of two channels, a recombination reaction with surface hydroxyls to form additional methanol at ∼350 K and a disproportionation reaction to form methanol and formaldehyde at ∼500 K. Only 20% of the methoxy species undergo the disproportionation reaction, with most of them reacting via the 350 K pathway.

Atomic-Scale View of the Oxidation and Reduction of Supported Ultrathin FeO Islands.

By means of scanning tunneling microscopy (STM) measurements, we studied in situ the oxidation and reduction of FeO bilayer islands on Au(111) by oxygen (O2) and hydrogen (H2), respectively. The FeO islands respond very dynamically toward O2, with the coordinatively unsaturated ferrous (CUF) sites at the island edges being essential for O2 dissociation and O atom incorporation. An STM movie obtained during oxidation reveals how further O2 molecules can dissociate after the consumption of all initially existing CUF sites through the formation of new CUF sites. In contrast, we found that H2 molecules only dissociate when vibrationally excited through the ion gauge and only at the basal plane of FeO islands, implying that the CUF sites are not relevant for H2 dissociation. Our STM results reveal how excess O atoms are incorporated and released in O2 and H2 and thus shed light onto the stability of inverse catalysts during a catalyzed reaction.

Structural and electronic properties of Fe dopants in cobalt oxide nanoislands on Au(111).

Mixed metal oxides of earth-abundant 3d transition metals are an interesting class of materials that show interesting magnetic properties and a significant synergistic effect as catalysts for electrochemical oxygen evolution compared to simple unary oxides. However, the exact atomic-scale nature of such mixed oxide phases and the link to their interesting physico-chemical properties are poorly understood. Here, a combination of scanning tunneling microscopy and x-ray photoemission spectroscopy reveals that Fe species embed in a facile way into CoO bilayers on Au(111) resulting in an Fe doped oxide. Density functional theory and the spectroscopic fingerprint from x-ray photoemission spectroscopy reveal that the Fe dopants in the cobalt oxide matrix assume a higher oxidation state than in the structurally corresponding unary bilayer oxide. Furthermore, the substituted Fe is structurally displaced further away from the Au than the metal in either of the corresponding pure unary oxides. Both O and to a smaller extent Co in the nearest coordination shell are also structurally and electronically perturbed. The interesting effects observed in the bilayer binary oxides may enable a better fundamental understanding of the nature of doping of metal oxides, in general, and promotion effects in catalytic applications.

Water Dissociation and Hydroxyl Ordering on Anatase TiO_{2}(001)-(1×4).

We studied the interaction of water with the anatase TiO_{2}(001) surface by means of scanning tunneling microscopy, x-ray photoelectron spectroscopy, and density functional theory calculations. Water adsorbs dissociatively on the ridges of a (1×4) reconstructed surface, resulting in a (3×4) periodic structure of hydroxyl pairs. We observed this process at 120 K, and the created hydroxyls desorb from the surface by recombination to water, which occurs below 300 K. Our calculations reveal the water dissociation mechanism and uncover a very pronounced dependence on the coverage. This strong coverage dependence is explained through water-induced reconstruction on anatase TiO_{2}(001)-(1×4). The high intrinsic reactivity of the anatase TiO_{2}(001) surface towards water observed here is fundamentally different from that seen on other surfaces of titania and may explain its high catalytic activity in heterogeneous catalysis and photocatalysis.

The Structure of the Cobalt Oxide/Au Catalyst Interface in Electrochemical Water Splitting.

The catalytic synergy between cobalt oxide and gold leads to strong promotion of the oxygen evolution reaction (OER)-one half-reaction of electrochemical water splitting. However, the mechanism behind the enhancement effect is still not understood, in part due to a missing structural model of the active interface. Using a novel interplay of cyclic voltammetry (CV) for electrochemistry integrated with scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) on an atomically defined cobalt oxide/Au(111) system, we reveal here that the supporting gold substrate uniquely favors a flexible cobalt-oxyhydroxide/Au interface in the electrochemically active potential window and thus suppresses the formation of less active bulk cobalt oxide morphologies. The findings substantiate why optimum catalytic synergy is obtained for oxide coverages on gold close to or below one monolayer, and provide the first morphological description of the active phase during electrocatalysis.

Visualizing hydrogen-induced reshaping and edge activation in MoS2 and Co-promoted MoS2 catalyst clusters.

Hydrodesulfurization catalysis ensures upgrading and purification of fossil fuels to comply with increasingly strict regulations on S emissions. The future shift toward more diverse and lower-quality crude oil supplies, high in S content, requires attention to improvements of the complex sulfided CoMo catalyst based on a fundamental understanding of its working principles. In this study, we use scanning tunneling microscopy to directly visualize and quantify how reducing conditions transforms both cluster shapes and edge terminations in MoS2 and promoted CoMoS-type hydrodesulfurization catalysts. The reduced catalyst clusters are shown to be terminated with a fractional coverage of sulfur, representative of the catalyst in its active state. By adsorption of a proton-accepting molecular marker, we can furthermore directly evidence the presence of catalytically relevant S-H groups on the Co-promoted edge. The experimentally observed cluster structure is predicted by theory to be identical to the structure present under catalytic working conditions.