Cement-Based Composites Containing Oxidized Graphene Nanoplatelets: Effects on the Mechanical and Electrical Properties.

Graphene nanoplatelets can improve the electrical and mechanical properties of cement matrix composites. The dispersion and interaction of graphene in the cement matrix appears to be difficult due to its hydrophobic nature. By introducing polar groups, graphene oxidation improves the level of dispersion and interaction with the cement. In this work, graphene oxidation using sulfonitric acid for 10, 20, 40, and 60 min was studied. Thermogravimetric Analysis (TGA) and Raman spectroscopy were employed to analyze the graphene before and after the oxidation. The mechanical properties of the final composites showed an improvement of 52% in the flexural strength, 4% in the fracture energy, and 8% in the compressive strength in the case of 60 min of oxidation. In addition, the samples showed a reduction of at least one order of magnitude in electrical resistivity when compared with pure cement.

A First Assessment of Carbon Nanotubes Grown on Oil-Well Cement via Chemical Vapor Deposition.

In this study, carbon nanotubes (CNTs) were synthesized on an oil-well cement substrate using the chemical vapor deposition (CVD) method. The effect of synthesis process on cement was investigated in depth. In this regard, FE-SEM, RAMAN and X-Ray spectroscopy were used to characterize the cement before and after the synthesis process to reveal the modifications to the cementitious matrix and some unique morphological features of CNTs.

Cementitious composite materials for thermal energy storage applications: a preliminary characterization and theoretical analysis.

The lack of robust and low-cost sorbent materials still represents a formidable technological barrier for long-term storage of (renewable) thermal energy and more generally for Adsorptive Heat Transformations-AHT. In this work, we introduce a novel approach for synthesizing cement-based composite sorbent materials. In fact, considering the number of available hygrosopic salts that can be accommodated into a cementitious matrix-whose morphological properties can be also fine-tuned-the new proposed in situ synthesis paves the way to the generation of an entire new class of possible sorbents for AHT. Here, solely focusing on magnesium sulfate in a class G cement matrix, we show preliminary morphological, mechanical and calorimetric characterization of sub-optimal material samples. Our analysis enables us to theoretically estimate one of the most important figures of merit for the considered applications, namely the energy density which was found to range within 0.088-0.2 GJ/m3 (for the best tested sample) under reasonable operating conditions for space heating applications and temperate climate. The above estimates are found to be lower than other composite materials in the literature. Nonetheless, although no special material optimization has been implemented, our samples already compare favourably with most of the known materials in terms of specific cost of stored energy. Finally, an interesting aspect is found in the ageing tests under water sorption-desorption cycling, where a negligible variation in the adsorption capability is demonstrated after over one-hundred cycles.

An Analytical Mini-Review on the Compression Strength of Rubberized Concrete as a Function of the Amount of Recycled Tires Crumb Rubber.

Since waste tires constitute a serious environmental concern, several studies are devoted to the use of finely divided recycled rubber for the production of rubberized concrete by partial substitution of the mineral aggregate fraction. The introduction of rubber into concrete presents several advantages (e.g., improvement of toughness and thermal/electrical/acoustic insulation capacities). Unfortunately, the addition of a high content of rubber into concrete causes an important loss of mechanical resistance of the final composite. In this context, several scientific studies are devoted to investigate the best technical solutions for favoring the interfacial adhesion between rubber and cement paste, but the interpretation of the literature is often misleading. To overcome this issue, the metadata extrapolated from the single scientific works were critically re-analyzed, forming reference diagrams where the variability fields of the different rubber concrete formulations (in terms of mechanical responses as a function of the rubber content) were defined and the best performances discussed. This study evidenced the twofold role of reference diagrams, able in both presenting the data in an unambiguous manner (for a successful comparison) and providing the guidelines for future works in this research field.

Coffee-based colloids for direct solar absorption.

Despite their promising thermo-physical properties for direct solar absorption, carbon-based nanocolloids present some drawbacks, among which the unpleasant property of being potentially cytotoxic and harmful to the environment. In this work, a sustainable, stable and inexpensive colloid based on coffee is synthesized and its photo-thermal properties investigated. The proposed colloid consists of distilled water, Arabica coffee, glycerol and copper sulphate, which provide enhanced properties along with biocompatibility. The photo-thermal performance of the proposed fluid for direct solar absorption is analysed for different dilutions and compared with that of a traditional flat-plate collector. Tailor-made collectors, opportunely designed and realized via 3D-printing technique, were used for the experimental tests. The results obtained in field conditions, in good agreement with two different proposed models, show similar performance of the volumetric absorption using the proposed coffee-based colloids as compared to the classical systems based on a highly-absorbing surface. These results may encourage further investigations on simple, biocompatible and inexpensive colloids for direct solar absorption.