Lateral uniformity in chemical composition along a buried reaction front in polymers using off-specular reflectivity.

Off-specular neutron reflectometry was applied to characterize the form and amplitude of lateral compositional variations at a buried reaction-diffusion front. In this work, off-specular neutron measurements were first calibrated using off-specular x-ray reflectivity and atomic force microscopy via a roughened glass surface, both as a free surface and as a buried interface that was prepared by spin coating thin polymer films upon the glass surface. All three methods provided consistent roughness values despite the difference in their detection mechanism. Our neutron results demonstrated, for the first time, that the compositional heterogeneity at a buried reaction front can be measured; the model system used in this study mimics the deprotection reaction that occurs during the photolithographic process necessary for manufacturing integrated circuits.

Thin-film solid-state proton NMR measurements using a synthetic mica substrate: polymer blends.

Solid-state proton nuclear magnetic resonance (NMR) measurements are performed successfully on polymer blend thin films through the use of synthetic mica as a substrate. When used as a substrate, synthetic fluorophlogopite mica with its proton-free, diamagnetic character, allows for adequate measurement sensitivity while minimally perturbing the proton thin-film spectra, especially relative to more commonly available natural micas. Specifically, we use multiple-pulse techniques in the presence of magic-angle spinning to measure the degree of mixing in two different polymer blend thin films, polystyrene/poly(xylylene ether) and poly(1-methyladamantyl methacrylate) (PMAdMA)/triphenylsulfonium perfluorobutanesulfonate (TPS-PFBS), spin-coated onto mica substrates. Our earlier studies had focused on bulk systems where NMR signals are stronger, but may not be representative of thin films of the same systems that are relevant to many applications such as photoresist formulations in the electronics industry. The superiority of synthetic over natural paramagnetic mica is demonstrated by the maintenance of resolution and spinning sideband intensities (relative to bulk samples) for the synthetic mica samples. In contrast, degraded resolution and large spinning sidebands are shown to typify spectra of the natural mica samples. This approach can be applied to many other proton measurements of solid thin films, thereby greatly extending the types of systems to be investigated. Magnetic susceptibility measurements are also reported for all micas used.

Effect of hydrostatic pressure on closed-loop phase behavior of block copolymers.

The effect of hydrostatic pressure (P) on closed-loop phase behavior of deuterated polystyrene-block-poly(n-pentyl methacrylate) copolymers [dPS-PnPMA] was investigated by using small-angle neutron scattering and birefringence. For P<20.7 bar, dPS-PnPMA exhibited a lower disorder-to-order transition temperature (T(LDOT)) at 175 degrees C, and then an upper order-to-disorder transition temperature (T(UODT)) at 255 degrees C. With increasing pressure both T(LDOT) and T(UODT) were markedly changed, where dT(LDOT)/dP was 725 degrees C/kbar and dT(UODT)/dP was -725 degrees C/kbar. These are consistent with predictions by the Clausius-Clapeyron equation using measured values of the volume and enthalpy changes of both transitions. The large pressure coefficients imply that the closed-loop phase behavior observed for PS-PnPMA is an entropic-driven phase transition.