Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 14 de 14
Filter
Add more filters










Publication year range
1.
Chem Commun (Camb) ; 52(30): 5277-80, 2016 Apr 18.
Article in English | MEDLINE | ID: mdl-27001410

ABSTRACT

In this article we detail a robust high-throughput microfluidic platform capable of fabricating either symmetric or asymmetric giant unilamellar vesicles (GUVs) and characterise the mechanical properties of their membranes.


Subject(s)
Lab-On-A-Chip Devices , Membrane Lipids/chemistry , Unilamellar Liposomes/chemistry , Biomechanical Phenomena , Equipment Design , Membrane Fluidity , Phosphatidylcholines/chemistry
2.
Phys Chem Chem Phys ; 18(1): 149-55, 2016 Jan 07.
Article in English | MEDLINE | ID: mdl-26601888

ABSTRACT

Phase separation in ternary model membranes is known to occur over a range of temperatures and compositions and can be induced by increasing hydrostatic pressure. We have used small angle X-ray scattering (SAXS) to study phase separation along pre-determined tie lines in dioleoylphosphatidylcholine (DOPC), dipalmitoylphosphatidylcholine (DPPC) and cholesterol (CHOL) mixtures. We can unequivocally distinguish the liquid ordered (Lo) and liquid disordered (Ld) phases in diffraction patterns from biphasic mixtures and compare their lateral compressibility. The variation of tie line endpoints with increasing hydrostatic pressure was determined, at atmospheric pressure and up to 100 MPa. We find an extension and shift of the tie lines towards the DOPC rich region of the phase diagram at increased pressure, this behaviour differs slightly from that reported for decreasing temperature.


Subject(s)
1,2-Dipalmitoylphosphatidylcholine/chemistry , Cholesterol/chemistry , Phosphatidylcholines/chemistry , Hydrostatic Pressure , Models, Molecular , Scattering, Small Angle , X-Ray Diffraction
3.
Soft Matter ; 11(3): 600-7, 2015 Jan 21.
Article in English | MEDLINE | ID: mdl-25430049

ABSTRACT

Bicontinuous cubic structures offer enormous potential in applications ranging from protein crystallisation to drug delivery systems and have been observed in cellular membrane structures. One of the current bottlenecks in understanding and exploiting these structures is that cubic scaffolds produced in vitro are considerably smaller in size than those observed in biological systems, differing by almost an order of magnitude in some cases. We have addressed this technological bottleneck and developed a methodology capable of manufacturing highly swollen bicontinuous cubic membranes with length scales approaching those seen in vivo. Crucially, these cubic systems do not require the presence of proteins. We have generated highly swollen Im3m symmetry bicontinuous cubic phases with lattice parameters of up to 480 Å, composed of ternary mixtures of monoolein, cholesterol and negatively charged lipid (DOPS or DOPG) and we have been able to tune their lattice parameters. The swollen cubic phases are highly sensitive to both temperature and pressure; these structural changes are likely to be controlled by a fine balance between lipid headgroup repulsions and lateral pressure in the hydrocarbon chain region.


Subject(s)
Colloids/chemistry , Glycerides/chemistry , Phospholipids/chemistry , Pressure , Proteins/chemistry , Static Electricity , Temperature
4.
Lab Chip ; 15(2): 557-62, 2015 Jan 21.
Article in English | MEDLINE | ID: mdl-25413588

ABSTRACT

Giant unilamellar vesicles (GUVs) have a wide range of applications in biology and synthetic biology. As a result, new approaches for constructing GUVs using microfluidic techniques are emerging but there are still significant shortcomings in the control of fundamental vesicle structural parameters such as size, lamellarity, membrane composition and internal contents. We have developed a novel microfluidic platform to generate compositionally-controlled GUVs. Water-in-oil (W/O) droplets formed in a lipid-containing oil flow are transferred across an oil-water interface, facilitating the self-assembly of a phospholipid bilayer. In addition, for the first time we have studied the mechanical properties of the resultant lipid bilayers of the microfluidic GUVs. Using fluctuation analysis we were able to calculate the values for bending rigidity of giant vesicles assembled on chip and demonstrate that these correlate strongly with those of traditional low throughput strategies such as electroformation.


Subject(s)
Microfluidic Analytical Techniques/methods , Rheology , Unilamellar Liposomes/chemistry , Hemolysin Proteins/chemistry , Hemolysin Proteins/metabolism , Microfluidic Analytical Techniques/instrumentation , Microscopy, Fluorescence , Oils/chemistry , Phosphatidylcholines/chemistry , Phospholipids/chemistry , Rhodamines/chemistry , Unilamellar Liposomes/metabolism , Water/chemistry
5.
Biomicrofluidics ; 9(6): 064121, 2015 Nov.
Article in English | MEDLINE | ID: mdl-26759638

ABSTRACT

Droplet interface bilayer (DIB) networks are emerging as a cornerstone technology for the bottom up construction of cell-like and tissue-like structures and bio-devices. They are an exciting and versatile model-membrane platform, seeing increasing use in the disciplines of synthetic biology, chemical biology, and membrane biophysics. DIBs are formed when lipid-coated water-in-oil droplets are brought together-oil is excluded from the interface, resulting in a bilayer. Perhaps the greatest feature of the DIB platform is the ability to generate bilayer networks by connecting multiple droplets together, which can in turn be used in applications ranging from tissue mimics, multicellular models, and bio-devices. For such applications, the construction and release of DIB networks of defined size and composition on-demand is crucial. We have developed a droplet-based microfluidic method for the generation of different sized DIB networks (300-1500 pl droplets) on-chip. We do this by employing a droplet-on-rails strategy where droplets are guided down designated paths of a chip with the aid of microfabricated grooves or "rails," and droplets of set sizes are selectively directed to specific rails using auxiliary flows. In this way we can uniquely produce parallel bilayer networks of defined sizes. By trapping several droplets in a rail, extended DIB networks containing up to 20 sequential bilayers could be constructed. The trapped DIB arrays can be composed of different lipid types and can be released on-demand and regenerated within seconds. We show that chemical signals can be propagated across the bio-network by transplanting enzymatic reaction cascades for inter-droplet communication.

6.
Biomicrofluidics ; 8(5): 054113, 2014 Sep.
Article in English | MEDLINE | ID: mdl-25538807

ABSTRACT

In this study, a novel droplet based microfluidic method for the generation of different sized droplet interface bilayers is reported. A microfluidic platform was designed, which allows the generation and packing of picoliter lipid coated water droplets. Droplets were generated by hydrodynamic focusing coupled with selective transport along grooves according to their size. A trapping structure at the end of the groove and a fine control of the flow pressures allowed for the droplets to be successfully trapped and aligned on demand. This technology facilitates the fine control of droplet size production as well as the generation of extended networks from a variety of lipids including 1,2-diphytanoyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-sn-glycero-3-phosphocholine in linear and non-linear configurations, which is vital to the application of Droplet Interface Bilayers to biological network construction on-chip.

7.
Chem Soc Rev ; 43(7): 2174-86, 2014 Apr 07.
Article in English | MEDLINE | ID: mdl-24407412

ABSTRACT

Glasses and glass-ceramics have had a tremendous impact upon society and continue to have profound industrial, commercial and domestic importance. A remarkable number of materials, with exceptional optical and mechanical properties, have been developed and enhanced using the glass-ceramic method over many years. In order to develop glass-ceramics, glass is initially prepared via high temperature synthesis and subsequently heat treated, following a carefully designed and controlled process. A glass-ceramic system comprises crystalline and non-crystalline phases; in multicomponent systems these phases are significantly different from the initial glass composition. The properties of glass-ceramics are defined by microstructure, crystal morphology as well as the final chemical composition and physical properties of the residual glass. Knowing the mechanism of glass crystallisation, it is possible to predict and design a glass-ceramic system with near-ideal properties that exactly fulfil the requirements for a particular application. This tutorial review is a basic introduction to the crystallisation in glasses and mainly focuses on silicate and closely related oxide glasses. The review describes and discusses key learning points in five different sections, which facilitate the understanding of glass crystallisation and development of glass-ceramics.

8.
Dent Mater ; 27(10): 990-6, 2011 Oct.
Article in English | MEDLINE | ID: mdl-21880355

ABSTRACT

OBJECTIVE: This study reports real time neutron diffraction on the Empress II glass-ceramic system. METHODS: The commercial glass-ceramics was characterized by real time neutron diffraction, ³¹P and ²9Si solid-state MAS-NMR, DSC and XRD. RESULTS: On heating, the as-received glass ceramic contained lithium disilicate (Li2Si2O5), which melted with increasing temperature. This was revealed by neutron diffraction which showed the Bragg peaks for this phase had disappeared by 958°C in agreement with thermal analysis. On cooling lithium metasilicate (Li2SiO3) started to form at around 916°C and a minor phase of cristobalite at around 852°C. The unit cell volume of both Li-silicate phases increased linearly with temperature at a rate of +17×10⁻³ ų.°C⁻¹. Room temperature powder X-ray diffraction (XRD) of the material after cooling confirms presence of the lithium metasilicate and cristobalite as the main phases and shows, in addition, small amount of lithium disilicate and orthophosphate. ³¹P MAS-NMR reveals presence of the lithiorthophosphate (Li3PO4) before and after heat treatment. The melting of lithium disilicate on heating and crystallisation of lithium metasilicate on cooling agree with endothermic and exotermic features respectively observed by DSC. ²9Si MAS-NMR shows presence of lithium disilicate phase in the as-received glass-ceramic, though not in the major proportion, and lithium metasilicate in the material after heat treatment. Both phases have significantly long T1 relaxation time, especially the lithium metasilicate, therefore, a quantitative analysis of the ²9Si MAS-NMR spectra was not attempted. Significance. The findings of the present work demonstrate importance of the commercially designed processing parameters in order to preserve desired characteristics of the material. Processing the Empress II at a rate slower than recommended 60°C min⁻¹ or long isothermal hold at the maximal processing temperature 920°C can cause crystallization of lithium metasilicate and cristobalite instead of lithium disilicate as major phase.


Subject(s)
Dental Porcelain/chemistry , Neutron Diffraction , Calorimetry, Differential Scanning , Crystallization , Crystallography, X-Ray , Hot Temperature , Lithium Compounds/chemistry , Magnetic Resonance Spectroscopy , Materials Testing , Scattering, Small Angle
9.
Phys Chem Chem Phys ; 13(8): 3033-8, 2011 Feb 28.
Article in English | MEDLINE | ID: mdl-21135956

ABSTRACT

Over a range of hydration, unsaturated diacylglycerol/phosphatidylcholine mixtures adopt an inverse micellar cubic phase, of crystallographic space group Fd3m. In this study hydrated DOPC:DOG mixtures with a molar ratio close to 1 : 2 were examined as a function of hydrostatic pressure, using synchrotron X-ray diffraction. The small-angle diffraction pattern at atmospheric pressure was used to calculate 2-D sections through the electron density map. Pressure initially has very little effect on the structure of the Fd3m cubic phase, in contrast to its effect on hydrated inverse bicontinuous cubic phases. At close to 2 kbar, a sharp transition occurs from the Fd3m phase to a pair of coexisting phases, an inverse hexagonal H(II) phase plus an (ordered) lamellar phase. Upon increasing the pressure to 3 kbar, a further sharp transition occurs from the H(II) phase to a (fluid) lamellar phase, in coexistence with the ordered lamellar phase. These transitions are fully reversible, but show hysteresis. Remarkably, the lattice parameter of the Fd3m phase is practically independent of pressure. These results show that these two lipids are miscible at low pressure, adopting a single lyotropic phase (Fd3m); they then become immiscible above a critical pressure, phase separating into DOPC-rich and DOG-rich phases.


Subject(s)
Diglycerides/chemistry , Micelles , Phosphatidylcholines/chemistry , Hydrostatic Pressure , Phase Transition , Scattering, Small Angle , Temperature , X-Ray Diffraction
10.
J Mater Sci Mater Med ; 20(8): 1611-8, 2009 Aug.
Article in English | MEDLINE | ID: mdl-19330429

ABSTRACT

We report on the bioactivity of two series of glasses in the SiO(2)-Na(2)O-CaO-P(2)O(5) system after immersion in simulated body fluid (SBF) after 21 days. The effect of P(2)O(5) content was examined for compositions containing 0-9.25 mol.% phosphate. Both series of glasses degraded to basic pH, but the solutions tended towards to neutrality with increasing phosphate content; a result of the acidic phosphate buffering the effect of the alkali metal and alkaline earth ions on degradation. Bioactivity was assessed by the appearance of features in the X-ray diffraction (XRD) traces and Fourier transform infrared (FTIR) spectra consistent with crystalline hydroxyl-carbonate-apatite (HCAp): such as the appearance of the (002) Bragg reflection in XRD and splitting of the P-O stretching vibration around 550 cm(-1) in the FTIR respectively. All glasses formed HCAp in SBF over the time periods studied and the time for formation of this crystalline phase occurred more rapidly in both series as the phosphate contents were increased. For P(2)O(5) content >3 mol.% both series exhibited highly crystalline apatite by 16 h immersion in SBF. This indicates that in the compositions studied, phosphate content is more important for bioactivity than network connectivity (NC) of the silicate phase and compositions showing rapid apatite formation are presented, superior to 45S5 Bioglass which was tested under identical conditions for comparison.


Subject(s)
Calcium Compounds/chemistry , Ceramics/therapeutic use , Oxides/chemistry , Phosphates/pharmacology , Silicates/chemistry , Sodium Hydroxide/chemistry , Body Fluids/physiology , Bone Substitutes/chemistry , Ceramics/chemical synthesis , Ceramics/chemistry , Ceramics/pharmacology , Materials Testing , Phosphates/chemistry , Spectroscopy, Fourier Transform Infrared , Time Factors , X-Ray Diffraction
11.
Biochem Soc Trans ; 35(Pt 3): 498-501, 2007 Jun.
Article in English | MEDLINE | ID: mdl-17511638

ABSTRACT

The nature of the bilayer motif coupled with the ability of lipids and proteins to diffuse freely through this structure is crucial to the viability of cells and their ability to compartmentalize domains contained therein. It seems surprising to find then that biological as well as model membranes exist in a dynamic state of mechanical stress. The stresses within such membranes are surprisingly large, typically reaching up to 50 atm (1 atm=101.325 kPa) at the core of the membrane and vary as a function of depth. The uneven distribution of lateral pressures within monolayer leaflets causes them to bend away from or towards the water interface. This can result in the formation of complex, self-assembled mesophases, many of which occur in vivo. Our knowledge of the principles underlying membrane mechanics has reached the point where we are now able to manipulate them and create nano-structures with reasonable predictability. In addition, they can be used both to explain and control the partitioning of amphipathic proteins on to membranes. The dependence of the dynamics of membrane-bound proteins and the chemical reactivity of amphipathic drug molecules on membrane stresses suggests that Nature itself takes advantage of this. Understanding and manipulating these internal forces will be a key element in creating self-assembled, biocompatible, nanoscale cell-like systems.


Subject(s)
Membranes/chemistry , Biocompatible Materials/chemistry , Lipid Bilayers/chemistry , Membrane Proteins/chemistry , Membranes, Artificial , Models, Biological , Nanostructures/chemistry , Phosphatidylcholines/biosynthesis , Phosphatidylcholines/chemistry , Stress, Mechanical , Thermodynamics
12.
J Mater Sci Mater Med ; 17(5): 397-402, 2006 May.
Article in English | MEDLINE | ID: mdl-16688578

ABSTRACT

The suitability of Glass Polyalkenoate Cements (GPCs) for orthopaedic applications is retarded by the presence in the glass phase of aluminium, a neurotoxin. Unfortunately, the aluminium ion plays an integral role in the setting process of GPCs and its absence is likely to hinder cement formation. However, the authors have previously shown that aluminium-free GPCs may be formulated based on calcium zinc silicate glasses and these novel materials exhibit significant potential as hard tissue biomaterials. However there is no data available on the structure of these glasses. (29)Si MAS-NMR, differential thermal analysis (DTA), X-ray diffraction (XRD), and network crosslink density (CLD) calculations were used to characterize the structure of five calcium zinc silicate glasses and relate glass structure to reactivity. The results indicate that glasses capable of forming Zn-GPCs are predominantly Q(2)/Q(3) in structure with corresponding network crosslink densities greater than 2. The correlation of CLD and MAS-NMR results indicate the primary role of zinc in these simple glass networks is as a network modifier and not an intermediate oxide; this fact will allow for more refined glass compositions, with less reactive structures, to be formulated in the future.


Subject(s)
Biocompatible Materials/chemistry , Glass Ionomer Cements/chemistry , Magnetic Resonance Spectroscopy/methods , Silicates/chemistry , Zinc/chemistry , Aluminum/chemistry , Calcium/chemistry , Hot Temperature , Materials Testing , Oxides/chemistry , Polymers , X-Ray Diffraction , Zinc Compounds/chemistry
13.
J Dent ; 34(8): 574-81, 2006 Sep.
Article in English | MEDLINE | ID: mdl-16513240

ABSTRACT

OBJECTIVES: The main objective is the characterisation of the setting reaction in glass ionomer cements based on experimental ionomer glasses with different fluorine content and a commercial glass ionomer cement liquid by using 13C CP/MAS-NMR, 29Si, 27Al and 31P MAS-NMR spectroscopy in order to receive information specifically about the cross-linking process. METHODS: Different fluorine containing glass compositions based on 4.5SiO2-3Al2O3-1.5P2O5-(5-z)CaO-zCaF(2) where z=0-3, were mixed with a commercially available polymer liquid to form glass ionomer cements. The cements were subjected to 27Al, 13C CP/MAS, 29Si, and 31P MAS-NMR analysis. RESULTS: The 27Al spectra showed clearly the formation of six-fold coordinate Al(VI), that may crosslink the carboxyl groups in the poly-acid molecules. A shift towards to more positive values of the carboxyl peak in the 13C CP/MAS-NMR spectra showed clearly the proton dissociation of the carboxyl groups. A shift towards more negative values was observed in the 29Si MAS-NMR spectra, suggesting formation of hydrated silica gel and consequently formation of additional Si-O-Si bonds. 31P MAS-NMR spectra also reflected changes in the coordination state around a PO4(3-) tetrahedron. Increasing the fluorine content of the glasses resulted generally in increased reactivity during setting, due to promoting cross-linking and repolymerisation of the silicate phase, followed by clear changes in the MAS-NMR spectra. CONCLUSIONS: The cross-linking process during the setting reaction of glass ionomer cements can be followed by MAS-NMR spectroscopy observing the conversion of Al(IV) to Al(VI). The acid base setting reaction is completed in 1 day and no further significant changes in the MAS-NMR spectra can be observed. Further study is required in order to understand the role of phosphorus.


Subject(s)
Glass Ionomer Cements/chemistry , Aluminum/analysis , Aluminum Compounds/chemistry , Carbon Dioxide/chemistry , Carbon Isotopes/analysis , Chemistry, Pharmaceutical , Cross-Linking Reagents , Fluorides/chemistry , Glass/chemistry , Glass Ionomer Cements/chemical synthesis , Isotopes , Magnetic Resonance Spectroscopy , Materials Testing , Molecular Structure , Phosphorus Isotopes/analysis , Silicon/analysis , Silicon Compounds/chemistry
14.
J Dent ; 34(8): 525-32, 2006 Sep.
Article in English | MEDLINE | ID: mdl-16522349

ABSTRACT

OBJECTIVE: The aim of this study is to characterise a range of model and commercially available glasses used to form glass (ionomer) polyalkenoate cements. METHODS: A range of model fluoro-alumino-silicate glasses that form the basis of glass (ionomer) polyalkenoate cements and five commercial glasses have been characterised by 29Si, 27Al, 31P and 19F Magic Angle Spinning Nuclear Magnetic Resonance (MAS-NMR). RESULTS: The 29Si spectra indicate a predominantly Q33Al and Q44Al structure where the Q33Al species represents a silicon with one non-bridging oxygen and three Si-O-Al linkages and the Q44Al species a silicon with four Si-O-Al bonds. Aluminium was found in predominantly four coordinate sites, but glasses with high fluorine contents showed an increasing proportion of five and six coordinate aluminium. In phosphate containing glasses the phosphorus was present as Al-O-PO3(2-) type species indicating local charge compensation of Al3+ and P5+ in the glass structure. 19F MAS-NMR indicated the presence of F-Ca(n), Al-F-Ca(n), F-Sr(n), Al-F-Sr(n) and Al-F-Na(n) species where F-M(n) indicates a fluorine surrounded by n next nearest neighbour cations and Al-F-M(n) represents a fluorine bonded to aluminium with the metal, M in close proximity charge balancing the tetrahedral AlO3F species. The proportion of Al-F-M(n) species increased with increasing fluorine content of the glass and lower non-bridging oxygen contents. There was no evidence of Si-F bonds in any of the glasses. CONCLUSIONS: The local structure of the phosphate containing glasses with regard to fluorine, calcium, strontium and phosphate is similar to that of fluorapatite the mineral phase of tooth. This may explain the ease with which these glasses crystallize to fluorapatites and the recently observed mineralization of glass polyalkenoate cements found in vivo.


Subject(s)
Aluminum Compounds/chemistry , Fluorides/chemistry , Glass Ionomer Cements/chemistry , Glass/chemistry , Silicon Compounds/chemistry , Aluminum/analysis , Durapatite/chemistry , Fluorine Radioisotopes/analysis , Isotopes , Magnetic Resonance Spectroscopy , Molecular Conformation , Phosphorus Isotopes/analysis , Silicon/analysis
SELECTION OF CITATIONS
SEARCH DETAIL
...