Non-Ultrawide Bandgap Semiconductor GaSe Nanobelts for Sensitive Deep Ultraviolet Light Photodetector Application.

In this paper, the authors report the fabrication of a sensitive deep ultraviolet (DUV) photodetector by using an individual GaSe nanobelt with a thickness of 52.1 nm, which presents the highest photoresponse at 265 nm illumination with a responsivity and photoconductive gain of about 663 A W-1 and 3103 at a 3 V bias, respectively, comparable to or even better than other reported devices based on conventional wide bandgap semiconductors. According to the simulation, this photoelectric property is associated with the wavelength-dependent absorption coefficient of the GaSe crystal, for which incident light with shorter wavelengths will be absorbed near the surface, while light with longer wavelengths will have a larger penetration depth, leading to a blueshift of the absorption edge with decreasing thickness. Further finite element method (FEM) simulation reveals that the relatively thin GaSe nanobelt exhibits an enhanced transversal standing wave pattern compared to its thicker counterpart at a wavelength of 265 nm, leading to an enhanced light-matter interaction and thereby more efficient photocurrent generation. The device can also function as an effective image sensor with acceptable spatial resolution. This work will shed light on the facile fabrication of a high-performance DUV photodetector from non-ultrawide bandgap semiconductors.

Spectral Engineering of InSe Nanobelts for Full-Color Imaging by Tailoring the Thickness.

In this work, we report on the synthesis of InSe nanobelts through a catalyst-free chemical vapor deposition (CVD) growth approach. A remarkable blue shift of the peak photoresponse was observed when the thickness of the InSe nanobelt decreases from 562 to 165 nm. Silvaco Technology Computer Aided Design (TCAD) simulation reveals that such a shift in spectral response should be ascribed to the wavelength-dependent absorption coefficient of InSe, for which incident light with shorter wavelengths will be absorbed near the surface, while light with longer wavelengths will have a greater penetration depth, leading to a red shift of the absorption edge for thicker nanobelt devices. Considering the above theory, three kinds of photodetectors sensitive to blue (450 nm), green (530 nm), and red (660 nm) incident light were achieved by tailoring the thickness of the nanobelts, which can enable the spectral reconstruction of a purple "H" pattern, suggesting the potential application of 2D layered semiconductors in full-color imaging.