ABSTRACT
OBJECTIVES: The aim of this study was to evaluate the effect of two different cementation techniques of individually formed E-glass fiber-reinforced composite (FRC) post on bond strength and microleakage. METHODS: The crowns of extracted third molars were removed and post preparation was carried out with parapost drills (diameter 1.5 mm). After application of bonding agents individually formed FRC posts (everStick POST, diameter 1.5 mm) were cemented into the post spaces with either ParaCem®Universal or self-adhesive RelyX™Unicem, using two different cementation techniques: 1) an "indirect (traditional) technique" where the post was prepolymerized prior application of luting cement and insertion into the post space or 2) a "direct technique" where the uncured post was inserted to the post space with luting cement and light-polymerized in situ at the same time. After water storage of 48 hours, the roots (n = 10/group) were cut into discs of thickness of 2 mm. A push-out force was applied until specimen fracture or loosening of the post. A microleakage test was carried out on roots which were not subjected to the loading test (n= 32) to evaluate the sealing capacity of the post-canal interface. The microleakage was measured using dye penetration depth under a stereomicroscope. RESULTS: Higher bond strength values (p<0.05) and less microleakage (p<0.05) were obtained with the "direct technique" compared to the "indirect technique". None of the FRC posts revealed any dye penetration between the post and the cement. CONCLUSIONS: The "direct technique" seems to be beneficial when cementing individually formed FRC posts.
ABSTRACT
OBJECTIVES: The aim of this study was to evaluate the load-bearing capacity and microstrain of incisors restored with posts of various kinds. Both prefabricated titanium posts and different fiber-reinforced composite posts were tested. METHODS: The crowns of human incisors were cut and post preparation was carried out. The roots were divided into groups: (1) prefabricated serrated titanium posts, (2) prefabricated carbon fiber-reinforced composite posts, (3) individually formed glass fiber-reinforced composite posts with the canal full of fibers, and (4) individually formed "split" glass fiber-reinforced composite posts. The posts were cemented and composite crowns were made. Intact human incisors were used as reference. All roots were embedded in acrylic resin cylinders and stored at room temperature in water. Static load was applied under a loading angle of 45° using a universal testing machine. On half of the specimens microstrain was measured with strain gages and an acoustic emission analysis was carried out. Failure mode assessment was also made. RESULTS: The group with titanium posts showed highest number of unfavorable failures compared to the groups with fiber-reinforced composite posts. SIGNIFICANCE: With fiber-reinforced composite posts the failures may more often be favorable compared to titanium posts, which clinically means repairable failures.
Subject(s)
Composite Resins/chemistry , Dental Materials/chemistry , Dental Prosthesis Design , Incisor/physiology , Post and Core Technique/instrumentation , Biomechanical Phenomena , Carbon/chemistry , Carbon Fiber , Cementation , Crowns , Dental Stress Analysis/instrumentation , Elastic Modulus , Glass/chemistry , Humans , Light-Curing of Dental Adhesives , Microscopy, Acoustic , Polymethyl Methacrylate/chemistry , Stress, Mechanical , Temperature , Titanium/chemistry , Water/chemistry , Weight-Bearing/physiologyABSTRACT
AIMS: The aim of this study was to compare the attachment of different composite resin luting cements to a fiber-reinforced composite (FRC) post with a semi-interpenetrating polymer network polymer matrix. METHODS AND MATERIALS: Six different brands of composite resin luting cement stubs were applied on the surface of FRC post material and light-cured for 40 seconds. Shear bond strengths of luting cement stubs were measured using a universal testing machine. RESULTS: The differences in shear bond strengths between the cements were not statistically significant. CONCLUSION: All of the tested composite resin luting cements provided acceptable attachment to the tested FRC post. The tested FRC post material is suitable to use with different composite resin luting cements.
Subject(s)
Composite Resins , Dental Bonding , Post and Core Technique , Resin Cements , Composite Resins/chemistry , Dental Stress Analysis , Glass , Shear StrengthABSTRACT
The in vitro fracture behavior of severely damaged premolars, restored with metal crowns with limited ferrule and several post-and-core systems, was investigated. Crowns of maxillary premolars were removed and canals were prepared with Gates Glidden drills and with Parapost drills. Groups of 11 samples were each treated with cast post-and-cores (Parapost XP, Wironium Plus) (group 1), prefabricated metal posts (Parapost XH) (group 2), prefabricated glass fiber posts (Parapost FiberWhite) (group 3), and custom-made glass fiber posts (EverStick Post) (group 4). Posts and composite cores and metal crowns in groups 2, 3, and 4 were adhesively cemented. Post-and-cores and crowns in group 1 were cemented with phosphate cement. Thermocycling was performed (6,000x, 5-55 degrees C). Two static load tests (30 degrees ) were applied. During the first load test (preloading) no failures occurred. Failure modes from the second load test were categorized into favorable and unfavorable failures. Mean failure loads among the four groups (group 1, 1,845 N; group 2, 1,718 N; group 3, 1,812 N; and group 4, 1,514 N) were not significantly different. Unfavorable failures were root fractures and favorable failures were postcrown displacements. No differences in frequencies of unfavorable/favorable failures were seen among the groups. The results suggest that different post-and-core systems have no influence on the fracture behavior of severely damaged premolars restored with metal crowns with limited ferrule.
Subject(s)
Bicuspid/injuries , Crowns , Dental Alloys , Post and Core Technique , Tooth Fractures/physiopathology , Chromium Alloys/chemistry , Composite Resins/chemistry , Dental Alloys/chemistry , Dental Cements/chemistry , Dental Materials/chemistry , Dental Prosthesis Design , Dental Restoration Failure , Glass/chemistry , Humans , Resin Cements/chemistry , Root Canal Preparation/instrumentation , Stress, Mechanical , Tooth Preparation, Prosthodontic/methods , Tooth Root/injuries , Zinc Phosphate Cement/chemistryABSTRACT
PURPOSE: To study the fracture behavior of direct resin composite crowns with or without experimental fiber reinforcement. METHODS: Clinical crowns of single-rooted maxillary premolars were cut off at the cemento-enamel junction. Canals were prepared with Gates Glidden drills up to size 4. No additional post-space preparations were made. Roots were embedded in acrylic and canal entrances were standardized (depth 2 mm, diameter 1.75 mm). Three groups of 14 samples were treated as follows: (1) custom-made glass FRC post (EverStick Post); fibers 5 mm deep in the canal, (2) similar post-system as (1) with incorporation of a new type of glass fiber fabric, (3) no fiber reinforcement (control). Posts were cemented with resin cement (Panavia F). Resin composite crowns (Filtek Z250) were made using an anatomically formed mold. Static load until fracture was applied using a universal loading device with a cylindrical bar (diameter 2 mm) with a crosshead speed of 5 mm/minute (loading angle: 30 degrees to the tooth long-axis). Failure modes were categorized as favorable and unfavorable failures. RESULTS: There was no significant difference in mean failure loads among the four groups (P > 0.05). Favorable failures occurred significantly more often in Group 2 than in the other groups (P < 0.05). The results suggest that an incorporated glass fiber fabric does not affect the load-bearing capacity of resin composite complete crowns on structurally compromised and non-vital premolars. Incorporation of a glass fiber fabric, however, has a beneficial effect on the failure mode.
