Bragg coherent diffraction imaging of single 20†nm Pt particles at the ID01-EBS beamline of ESRF.

Electronic or catalytic properties can be modified at the nanoscale level. Engineering efficient and specific nanomaterials requires the ability to study their complex structure-property relationships. Here, Bragg coherent diffraction imaging was used to measure the three-dimensional shape and strain of platinum nanoparticles with a diameter smaller than 30 nm, i.e. significantly smaller than any previous study. This was made possible by the realization of the Extremely Brilliant Source of ESRF, The European Synchrotron. This work demonstrates the feasibility of imaging the complex structure of very small particles in three dimensions and paves the way towards the observation of realistic catalytic particles.

Reactor for nano-focused x-ray diffraction and imaging under catalytic in situ conditions.

A reactor cell for in situ studies of individual catalyst nanoparticles or surfaces by nano-focused (coherent) x-ray diffraction has been developed. Catalytic reactions can be studied in flow mode in a pressure range of 10-2-103 mbar and temperatures up to 900 °C. This instrument bridges the pressure and materials gap at the same time within one experimental setup. It allows us to probe in situ the structure (e.g., shape, size, strain, faceting, composition, and defects) of individual nanoparticles using a nano-focused x-ray beam. Here, the setup was used to observe strain and facet evolution of individual model Pt catalysts during in situ experiments. It can be used for heating other (non-catalytically active) nanoparticles (e.g., nanowires) in inert or reactive gas atmospheres or vacuum as well.

Three Dimensional Variable-Wavelength X-Ray Bragg Coherent Diffraction Imaging.

We present and demonstrate a formalism by which three-dimensional (3D) Bragg x-ray coherent diffraction imaging (BCDI) can be implemented without moving the sample by scanning the energy of the incident x-ray beam. This capability is made possible by introducing a 3D Fourier transform that accounts for x-ray wavelength variability. We demonstrate the approach by inverting coherent Bragg diffraction patterns from a gold nanocrystal measured with an x-ray energy scan. Variable-wavelength BCDI will expand the breadth of feasible in situ 3D strain imaging experiments towards more diverse materials environments, especially where sample manipulation is difficult.

Chemistry and structure of homoepitaxial SrTiO3 films and their influence on oxide-heterostructure interfaces.

The properties of single-crystal SrTiO3 substrates and homoepitaxial SrTiO3 films grown by pulsed laser deposition have been compared, in order to understand the loss of interfacial conductivity when more than a critical thickness of nominally homoepitaxial SrTiO3 is inserted between a LaAlO3 film and a SrTiO3 substrate. In particular, the chemical composition and the structure of homoepitaxial SrTiO3 investigated by low-energy ion-scattering and surface X-ray diffraction show that for insulating heterointerfaces, a Sr-excess is present between the LaAlO3 and homoepitaxial SrTiO3. Furthermore, an increase in the out-of-plane lattice constant is observed in LaAlO3, indicating that the conductivity both with and without insertion of the SrTiO3 thin film originates from a Zener breakdown associated with the polar catastrophe. When more than a critical thickness of homoepitaxial SrTiO3 is inserted between LaAlO3 and SrTiO3, the electrons transferred by the electronic reconstruction are trapped by the formation of a Sr-rich secondary phase and Sr-vacancies. The migration of Sr towards the surface of homoepitaxial SrTiO3 and accompanying loss of interfacial conductivity can be delayed by reducing the Sr-content in the PLD target.

The Materials Science beamline upgrade at the Swiss Light Source.

The Materials Science beamline at the Swiss Light Source has been operational since 2001. In late 2010, the original wiggler source was replaced with a novel insertion device, which allows unprecedented access to high photon energies from an undulator installed in a medium-energy storage ring. In order to best exploit the increased brilliance of this new source, the entire front-end and optics had to be redesigned. In this work, the upgrade of the beamline is described in detail. The tone is didactic, from which it is hoped the reader can adapt the concepts and ideas to his or her needs.

Atomic imaging and direct phase retrieval using anomalous surface x-ray diffraction.

The application of multi-wavelength anomalous diffraction to thin films, interfaces and surface structures is presented. The method directly determines the amplitudes and phases of the complex surface structure factors from surface x-ray diffraction data, measured at three different energies around the absorption edge of one of the elements present in the film. Thereby, one is able to directly Fourier transform the data, which immediately provides meaningful and unambiguous electron-density distributions. These serve as a starting point for subsequent structural refinement. The robustness of the algorithm was evaluated on simulated data as a proof of principle. The experimental limitations and their effect on the method will be discussed as well as stability tests for the algorithm, such as the positions of the anomalous scatterers and the interfacial roughness. It will be shown that the method can be applied to real structures. The algorithm was tested on real data from a thin film of SrTiO(3) grown on NdGaO(3)(110).

Electrostriction at the LaAlO3/SrTiO3 interface.

We present a direct comparison between experimental data and ab initio calculations for the electrostrictive effect in the polar LaAlO(3) layer grown on SrTiO(3) substrates. From the structural data, a complete screening of the LaAlO(3) dipole field is observed for film thicknesses between 6 and 20 uc. For thinner films, an expansion of the c axis of 2% matching the theoretical predictions for an electrostrictive effect is observed experimentally.

Evolution of the interfacial structure of LaAlO3 on SrTiO3.

The evolution of the atomic structure of LaAlO_{3} grown on SrTiO_{3} was investigated using surface x-ray diffraction in conjunction with model-independent, phase-retrieval algorithms between two and five monolayers film thickness. A depolarizing buckling is observed between cation and oxygen positions in response to the electric field of polar LaAlO_{3}, which decreases with increasing film thickness. We explain this in terms of competition between elastic strain energy, electrostatic energy, and electronic reconstructions. Based on these structures, the threshold for formation of a two-dimensional electron system at a film thickness of 4 monolayers is quantitatively explained. The findings are also qualitatively reproduced by density-functional-theory calculations.