Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 32(9): 16065-16074, 2024 Apr 22.
Article in English | MEDLINE | ID: mdl-38859243

ABSTRACT

A Kerr-lens mode-locked laser based on a Yb3+-doped disordered gadolinium scandate (Yb:GdScO3) crystal is reported for the first time, to the best of our knowledge. The crystal with the perovskite structure was grown using the Czochralski method, and its room temperature (RT) and low temperature (LT) spectra were also investigated. Due to the crystal's multisite structure (Gd3+/Sc3+ site), Yb:GdScO3 offers broad and intense polarized emission spectra in the near-infrared range (975-1075 nm). The stimulated emission cross section σSE is 0.46 × 10-20 cm2 at 1000 nm with an emission band width of 75.7 nm for E // b polarization. The continuous wave (CW) laser was operated pumped by a 976 nm fiber-coupled LD laser, resulting in a maximum output power of 8.74 W with a slope efficiency of 76.1% was obtained. Additionally, a pulses as short as 74 fs are generated at ∼1061.7 nm via Kerr-lens mode-locking. The average output power amounts to 32 mW at a pulse repetition rate of 101.4 MHz. All results indicate Yb:GdScO3 a promising candidate for 1 µm ultrashort laser.

2.
Sci Rep ; 14(1): 6960, 2024 Mar 23.
Article in English | MEDLINE | ID: mdl-38521826

ABSTRACT

This work presents an outline of a detection system that employs the Compton spectrometer method to assess the non-linearity of scintillator light yield. A novel approach is introduced, leading to more accurate measurements through the separate determination of the intrinsic light output parameters and the non-linearity of the scintillators. Key features of this system include the use of a portable scintillation detector with three photomultiplier tubes for precise measurement of the average number of detected photoelectrons and the incorporation of recent advancements in correction techniques for accidental coincidences. The integration of digital acquisition, offline data analysis, and geometric adaptation reduces the time required to perform a measurement. The developed detector can simultaneously measure different timing properties, as well as the relative intensities following ionization excitation in a scintillator. The system's performance is demonstrated through measurements of the light yield dependence on the deposited energy for commercially available liquid, plastic, and inorganic scintillators. Such instrumentation serves as a valuable tool in the development of novel scintillating materials, including liquid or solid organic scintillators, inorganic scintillators, and composite scintillators for electron detection, in addition to traditional X-ray or γ -ray detection.

3.
Opt Lett ; 48(3): 640-643, 2023 Feb 01.
Article in English | MEDLINE | ID: mdl-36723552

ABSTRACT

The spectroscopic properties and tunable laser performances of the orthorhombic perovskite Tm:GdScO3 crystal grown by the Czochralski method are comparatively studied for polarization along different crystallographic axes. The polarized emission spectrum of Tm:GdScO3 along the b-axis exhibits, to the best of our knowledge, the broadest bandwidth among all the single Tm3+-doped bulk gain media, indicating the strong inhomogeneous line broadening of Tm3+ ions in GdScO3 and thus leads to a broad and smooth gain spectrum. Tunable laser operation with a tuning range as broad as 321 nm from 1824 nm to 2145 nm is achieved, which indicates its potential for few-optical-cycle pulse generation in the 2-µm spectral range.

4.
Opt Express ; 30(4): 5826-5834, 2022 Feb 14.
Article in English | MEDLINE | ID: mdl-35209536

ABSTRACT

Lutetium aluminum garnet single-crystal fiber (SCF, ∼ Φ 0.9 mm - 165 mm) doped with 0.5 at.% Ho3+ has been grown by the micro-pulling-down (µ-PD) technique. The room-temperature absorption and emission spectra exhibit similar features to the bulk crystal. Laser performances of the SCFs with two different pump configurations, i.e., pump guiding and free-space propagation, are studied by employing a 1.9-µm laser diode and a high-brightness fiber laser, respectively. Laser slope efficiencies obtained with both pump configurations can be higher than 50%, and a maximum output power of 6.01 W is achieved at ∼ 2.09 µm with the former pump. The comparable efficiency to the high-brightness pump is an indication of that high laser performance can also be expected through pump-guiding in the SCF even with a low pump beam quality.

SELECTION OF CITATIONS
SEARCH DETAIL
...