Lactic Starter Dose Shapes S. aureus and STEC O26:H11 Growth, and Bacterial Community Patterns in Raw Milk Uncooked Pressed Cheeses.

Adding massive amounts of lactic starters to raw milk to manage the sanitary risk in the cheese-making process could be detrimental to microbial diversity. Adjusting the amount of the lactic starter used could be a key to manage these adverse impacts. In uncooked pressed cheeses, we investigated the impacts of varying the doses of a lactic starter (the recommended one, 1×, a 0.1× lower and a 2× higher) on acidification, growth of Staphylococcus aureus SA15 and Shiga-toxin-producing Escherichia coli (STEC) O26:H11 F43368, as well as on the bacterial community patterns. We observed a delayed acidification and an increase in the levels of pathogens with the 0.1× dose. This dose was associated with increased richness and evenness of cheese bacterial community and higher relative abundance of potential opportunistic bacteria or desirable species involved in cheese production. No effect of the increased lactic starter dose was observed. Given that sanitary criteria were paramount to our study, the increase in the pathogen levels observed at the 0.1× dose justified proscribing such a reduction in the tested cheese-making process. Despite this, the effects of adjusting the lactic starter dose on the balance of microbial populations of potential interest for cheese production deserve an in-depth evaluation.

Calcium lactate as an attractive compound to partly replace salt in blue-veined cheese.

In addition to their high sodium content, cheeses are thought to induce an acid load to the body, which is associated with deleterious effects on consumers' health. Our objective was to explore the use of alkalinizing salts in partial substitution of NaCl to reduce both the sodium content and the acid-forming potential of cheese, without altering its sensory properties. Blue-veined cheeses were produced under industrial conditions, using brine salting followed by dry salting with a 4:1 (wt/wt) mixture of calcium lactate:NaCl or calcium citrate:NaCl. Sodium chloride was used in 2 granulometries: coarse (control treatment) and fine, to obtain homogeneous mixtures with the organic salts. Cheeses were then ripened for 56 d. No major appearance defects were observed during ripening. Calcium lactate substitution decreased the Na content of the cheese core by 33%, and calcium citrate substitution increased the citrate content of the cheese core by 410%, respectively, compared with fine NaCl. This study highlighted the substantial role of salt granulometry in sodium content, with the use of the coarse salt reducing the sodium content by 21% compared with fine salt. Sensory profiles showed nonsignificant differences in bitter and salty perceptions of salt-substituted cheeses with calcium lactate and calcium citrate compared with control cheeses. The use of calcium lactate should be considered to reduce the sodium content and improve the nutritional quality of cheeses while maintaining the sensory quality of the products. Alkalinizing organic salts could replace the acidifying salts KCl or CaCl2, which are currently used in salt replacement and are not recommended for consumers with renal disease. The method described here should be considered by cheese-making producers to improve the nutritional quality of cheese. Additional nutritional optimization strategies are suggested.

Draining and salting as responsible key steps in the generation of the acid-forming potential of cheese: Application to a soft blue-veined cheese.

A disregarded nutritional feature of cheeses is their high acid-forming potential when ingested, which is associated with deleterious effects on consumers' health. This work aimed to characterize the acid-forming potential of a blue-veined cheese during manufacturing to identify the main steps of the process involved in this phenomenon. Sampling was performed on 3 batches at 10 steps of the cheese-making process: reception of raw milk, pasteurization, maturation of milk, coagulation, stirring, draining of the curds, and 4 ripening stages: 21, 28, 42, and 56d. The acid-forming potential of each sample was evaluated by (1) the calculation of the potential renal acid load (PRAL) index (considering protein, Cl, P, Na, K, Mg, and Ca contents), and (2) its organic anion content (lactate and citrate), considered as alkalinizing elements. Draining and salting were identified as the main steps responsible for generation of the acid-forming potential of cheese. The draining process induced an increase in the PRAL index from 1.2mEq/100g in milk to 10.4mEq/100g in drained curds due to the increase in dry matter and the loss of alkaline minerals into the whey. The increase in PRAL value (20.3mEq/100g at d 56) following salting resulted from an imbalance between the strong acidogenic elements (Cl, P, and proteins) and the main alkalinizing ones (Na and Ca). Particularly, Cl had a major effect on the PRAL value. Regarding organic anions, draining induced a loss of 93% of the citrate content in initial milk. The lactate content increased as fermentation occurred (1,297.9mg/100g in drained curds), and then decreased during ripening (519.3mg/100g at d 56). This lactate level probably helps moderate the acidifying potential of end products. Technological strategies aimed at limiting the acid-forming potential of cheeses are proposed and deserve further research to evaluate their nutritional relevance.

Exploratory study of acid-forming potential of commercial cheeses: impact of cheese type.

Due to their composition, cheeses are suspected to induce an acid load to the body. To better understand this nutritional feature, the acid-forming potential of five cheeses from different cheese-making technologies and two milk was evaluated on the basis of their potential renal acid load (PRAL) index (considering protein, P, Cl, Na, K, Mg and Ca contents) and organic anions contents. PRAL index ranged from -0.8 mEq/100 g edible portion for fresh cheese to 25.3 mEq/100 g for hard cheese Cantal and 28 mEq/100 g for blue-veined cheese Fourme d'Ambert. PRAL values were greatly subjected to interbatch fluctuations. This work emphasized a great imbalance between acidifying elements of PRAL calculation (Cl, P and proteins elements) and alkalinizing ones (Na and Ca). Particularly, Cl followed by P elements had a strong impact on the PRAL value. Hard cheeses were rich in lactate, thus, might be less acidifying than suspected by their PRAL values only.

Impact of heating on sensory properties of French Protected Designation of Origin (PDO) blue cheeses. Relationships with physicochemical parameters.

The aim of this study was to measure the impact of heating on the sensory properties of blue-veined cheeses in order to characterise their sensory properties and to identify their specific sensory typology associated with physicochemical parameters. Sensory profiles were performed on a selection of Protected Designation of Origin (PDO) cheeses representing the four blue-veined cheese categories produced in the Massif Central (Fourme d'Ambert, Fourme de Montbrison, Bleu d'Auvergne and Bleu des Causses). At the same time, physicochemical parameters were measured in these cheeses. The relationship between these two sets of data was investigated. Four types of blue-veined cheeses displayed significantly different behaviour after heating and it is possible to discriminate these cheese categories through specific sensory attributes. Fourme d'Ambert and Bleu d'Auvergne exhibited useful culinary properties: they presented good meltability, stretchability and a weak oiling-off. However, basic tastes (salty, bitter and sour) are also sensory attributes which can distinguish heated blue cheeses. The relationship between the sensory and physicochemical data indicated a correlation suggesting that some of these sensory properties may be explained by certain physicochemical parameters of heated cheeses.

Impact of Gram-negative bacteria in interaction with a complex microbial consortium on biogenic amine content and sensory characteristics of an uncooked pressed cheese.

The impact of Gram-negative bacteria on sensory characteristics and production of volatile compounds as well as biogenic amines (BA) in the core of an uncooked pressed type model cheese was investigated in the presence of a defined complex microbial consortium. Eleven strains of Gram-negative bacteria, selected on the basis of their biodiversity and in vitro BA-production ability, were individually tested in a model cheese. Four out of 6 strains of Enterobacteriaceae (Citrobacter freundii UCMA 4217, Klebsiella oxytoca 927, Hafnia alvei B16 and Proteus vulgaris UCMA 3780) reached counts close to 6 log CFU g⁻¹ in the model cheese. In core of cheeses inoculated with Gram-negative bacteria, only slight differences were observed for microbial counts (Enterococcus faecalis or Lactobacillus plantarum count differences below 1 log CFU g⁻¹), acetate concentration (differences below 200 mg kg⁻¹) and texture (greater firmness) in comparison to control cheeses. Cheese core colour, odour and volatile compound composition were not modified. Although ornithine, the precursor of putrescine, was present in all cheeses, putrescine was only detected in cheeses inoculated with H. alvei B16 and never exceeded 2.18 mmol kg⁻¹ cheese dry matter. Cadaverine was only detected in cheeses inoculated with H. alvei B16, K. oxytoca 927, Halomonas venusta 4C1A or Morganella morganii 3A2A but at lower concentrations (<1.05 mmol kg⁻¹ cheese dry matter), although lysine was available. Only insignificant amounts of the detrimental BA histamine and tyramine, as well as isopentylamine, tryptamine or phenylethylamine, were produced in the cheese model by any of the Gram-negative strains, including those which produced these BA at high levels in vitro.

Safety improvement and preservation of typical sensory qualities of traditional dry fermented sausages using autochthonous starter cultures.

Traditional dry fermented sausages are manufactured without addition of starter cultures in small-scale processing units, their fermentation relying on indigenous microflora. Characterisation and control of these specific bacteria are essential for the sensory quality and the safety of the sausages. The aim of this study was to develop an autochthonous starter culture that improves safety while preserving the typical sensory characteristics of traditional sausages. An autochthonous starter composed of Lactobacillus sakei, Staphylococcus equorum and Staphylococcus succinus isolated from a traditional fermented sausage was developed. These strains were tested for their susceptibility to antibiotics and their production of biogenic amines. This starter was evaluated in situ at the French traditional processing unit where the strains had been isolated. Effects of the autochthonous starter were assessed by analysing the microbial, physico-chemical, biochemical and sensory characteristics of the sausages. Inoculation with the chosen species was confirmed using known species-specific PCR assays for L. sakei and S. equorum and a species-specific PCR assay developed in this study for S. succinus. Strains were monitored by pulse-field gel electrophoresis typing. Addition of autochthonous microbial starter cultures improved safety compared with the traditional natural fermentation of sausages, by inhibiting the pathogen Listeria monocytogenes, decreasing the level of biogenic amines and by limiting fatty acid and cholesterol oxidation. Moreover, autochthonous starter did not affect the typical sensory quality of the traditional sausages. This is the first time to our knowledge that selection, development and validation in situ of autochthonous starter cultures have been carried out, and also the first time that S. equorum together with S. succinus have been used as starter cultures for meat fermentation. Use of autochthonous starter cultures is an effective tool for limiting the formation of unsafe compounds in traditional sausage while preserving their original and specific sensory quality.

Investigation of the physicochemical and sensory homogeneity of traditional French dry sausages.

The aim of this study was to investigate the homogeneity of the traditional dry sausages manufactured in small scale facilities from the Massif Central region in France by taking into account the diversity of the production in this area. The homogeneity was estimated by analysis of the physicochemical parameters of 6 types of traditional dry sausages chosen as representatives of the production diversity. The homogeneity was evaluated (i) within the product, (ii) in the production batch and (iii) over 2 different seasons for each type of dry sausage. When heterogeneity was detected, sensory analysis was performed in order to check if the physicochemical differences found were perceived by a sensory panel. The physicochemical results showed that there was no significant heterogeneity within the product nor there was in the production batch. Over the 2 seasons studied, 3 out of the 6 dry sausages were heterogeneous in composition and this feature was perceived by the sensory panel. The possible causes of this heterogeneity (amounts of ingredients added, type and composition of the raw materials used, length of drying) are discussed.