Improving the Electroluminescence Properties of New Chrysene Derivatives with High Color Purity for Deep-Blue OLEDs.

Two blue-emitting materials, 4-(12-([1,1':3',1″-terphenyl]-5'-yl)chrysen-6-yl)-N,N-diphenylaniline (TPA-C-TP) and 6-([1,1':3',1″-terphenyl]-5'-yl)-12-(4-(1,2,2-triphenylvinyl)phenyl)chrysene (TPE-C-TP), were prepared with the composition of a chrysene core moiety and terphenyl (TP), triphenyl amine (TPA), and tetraphenylethylene (TPE) moieties as side groups. The maximum photoluminescence (PL) emission wavelengths of TPA-C-TP and TPE-C-TP were 435 and 369 nm in the solution state and 444 and 471 nm in the film state. TPA-C-TP effectively prevented intermolecular packing through the introduction of TPA, a bulky aromatic amine group, and it showed an excellent photoluminescence quantum yield (PLQY) of 86% in the film state. TPE-C-TP exhibited aggregation-induced emission; the PLQY increased dramatically from 0.1% to 78% from the solution state to the film state. The two synthesized materials had excellent thermal stability, with a high decomposition temperature exceeding 460 °C. The two compounds were used as emitting layers in a non-doped device. The TPA-C-TP device achieved excellent electroluminescence (EL) performance, with Commission Internationale de L'Eclairage co-ordinates of (0.15, 0.07) and an external quantum efficiency of 4.13%, corresponding to an EL peak wavelength of 439 nm.

Influence of hydrothermal aging on the shear bond strength of 3D printed denture-base resin to different relining materials.

OBJECTIVES: This study evaluated the repairability of three-dimensional printed (3DP) denture bases based on different conventional relining materials and aging. MATERIAL AND METHODS: The groups for surface characterization (surface-roughness and contact-angle measurements) were divided based on the denture base and surface treatment. Shear bond strength test and failure-mode analysis were conducted by a combination of three variables: denture base, relining materials, and hydrothermal aging (HA). The initial characterization involved quantifying the surface roughness (n = 10) and contact angle (n = 10) of denture base specimens with and without sandblasting (SB) treatment. Four relining materials (Kooliner [K], Vertex Self-Curing [V], Tokuyama Rebase II (Normal) [T], and Ufi Gel Hard [U]) were applied to 3DP, heat-cured (HC), and self-cured (SC) denture-base resin specimens. Shear bond strength (n = 15) and failure-mode analyses (n = 15) were performed before and after HA, along with evaluations of the fractured surfaces (n = 4). Statistical analyses were performed using a two-way analysis of variance (ANOVA) for surface characterization, and a three-way ANOVA was conducted for shear bond strength. RESULTS: The surface roughness peaked in HC groups and increased after SB. The 3DP group displayed significantly lower contact angles, which increased after treatment, similar to the surface roughness. The shear bond strength was significantly lower for 3DP and HC denture bases than for SC denture bases, and peaked for U at 10.65 ± 1.88 MPa (mean ± SD). HA decreased the shear bond strength relative to untreated samples. Furthermore, 3DP, HC, and SC mainly showed mixed or cohesive failures with V, T, and U. K, on the other hand, trended toward adhesive failures when bonded with HC and SC. CONCLUSION: This study has validated the repairability of 3DP dentures through relining them with common materials used in clinical practice. The repairability of the 3DP denture base was on par with that of conventional materials, but it decreased after aging. Notably, U, which had a postadhesive application, proved to be the most effective material for repairing 3DP dentures.

Effects of washing solution temperature on the biocompatibility and mechanical properties of 3D-Printed dental resin material.

The use of digital manufacturing, particularly additive manufacturing using three-dimensional (3D) printing, is expanding in the field of dentistry. 3D-printed resin appliances must undergo an essential process, post-washing, to remove residual monomers; however, the effect of the washing solution temperature on the biocompatibility and mechanical properties remains unclear. Therefore, we processed 3D-printed resin samples under different post-washing temperatures (without temperature control (N/T), 30 °C, 40 °C, and 50 °C) for different durations (5, 10, 15, 30, and 60 min) and evaluated the degree of conversion rate, cell viability, flexural strength, and Vickers hardness. Increasing the washing solution temperature significantly improved the degree of conversion rate and cell viability. Conversely, increasing the solution temperature and time decreased the flexural strength and microhardness. This study confirmed that the washing temperature and time influence the mechanical and biological properties of the 3D-printed resin. Washing 3D-printed resin at 30 °C for 30 min was most efficient to maintain optimal biocompatibility and minimize changes of mechanical properties.

Effects of Post-Curing Light Intensity on the Mechanical Properties and Three-Dimensional Printing Accuracy of Interim Dental Material.

This study evaluated the effects of the light intensity of curing and the post-curing duration on the mechanical properties and accuracy of the interim dental material. After designing the specimen, 3D printing was performed, and the light intensity was divided into groups G20, G60, G80, and G120 (corresponding to 1.4−1.6, 2.2−3.0, 3.8−4.4, and 6.4−7.0 mW/cm2, respectively), with no post-curing or 5, 10, or 20 min of post-curing being performed. The flexural properties, Vickers microhardness, degree of conversion (DC), and 3D accuracy were then evaluated. The flexural properties and Vickers microhardness showed a sharp increase at the beginning of the post-curing and then tended to increase gradually as the light intensity and post-curing time increased (p < 0.001). On the other hand, there was no significant difference between groups in the accuracy analysis of a 3D-printed three-unit bridge. These results indicate that the light intensity of the post-curing equipment influences the final mechanical properties of 3D-printed resin and that post-curing can be made more efficient by optimizing the light intensity and post-curing time.

Effects of Periodontal Treatment in Patients with Periodontitis and Kidney Failure: A Pilot Study.

Periodontitis and chronic kidney disease are both chronic inflammatory diseases and share some common risk factors. This 3-month pilot study aimed to clarify whether non-surgical periodontal therapy is beneficial in clinical, biochemical, and microbiological conditions in patients with periodontitis and kidney failure. Kidney failure patients with moderate to severe periodontitis were recruited from two hospitals. Treatment group received non-surgical periodontal therapy, and control group received oral hygiene instruction only. Outcome assessments were conducted 1 and 3 months after treatment. Non-parametric tests were used to analyze the patient-level data. Periodontal site-level assessments were analyzed by Student t-test and paired t-test. Statistical significance was set at p-value < 0.05. A total of 11 subjects completed the study. There was no significant difference between groups in all-cause mortality, cardiovascular events, infection events, systemic parameters, and serum biomarkers. Comparing to control group, clinical periodontal parameters, gingival crevicular fluid interleukin-1ß (IL-1ß) level and periodontal pathogens showed significant improvement in the treatment group. Non-surgical periodontal treatment did not change systemic outcomes in kidney failure patients, but changed the local micro-environment.

Salivary Pro-Inflammatory Markers and Smoking Status Influences the Treatment Effectiveness of Periodontal Disease Patients with Hypertension.

BACKGROUND: Hypertension and periodontal diseases share several risk factors. Inflammation biomarkers in saliva are related to hypertension and periodontal disease. The aim of this study was to explore the role of the salivary inflammatory biomarkers in the treatment effectiveness of patients with hypertension and periodontal disease. METHODS: This observational study enrolled 160 subjects diagnosed with periodontitis, 40 of which had a history of hypertension. All subjects had completed scaling and root planning therapeutic procedures within four weeks. The clinical periodontal parameters (i.e., bleeding on probing, plaque control record (PCR), and probing depth (PD)) were evaluated before and after the treatment. Pro-inflammatory markers were determined using a commercial kit. RESULTS: The recovery rate (PD 4-9 mm) in non-hypertensive subjects was significantly higher than in hypertensive subjects (60.47% vs. 52.60%, respectively; p = 0.04). All clinical parameters, excluding PCR, positively correlated with salivary IL-1ß at baseline and after completing treatment. Our results showed that increased salivary IL-1ß levels were positively associated with decreased PCR (ß = -27.65 and p = 0.05) and PD recovery rate (ß = -17.05 and p = 0.02) in hypertensive subjects. CONCLUSIONS: The present study sheds important light on the clinical use of salivary pro-inflammatory cytokines as valuable biomarkers for predicting the treatment effectiveness of patients suffering from hypertension and periodontitis.

IL-8 as a Potential Therapeutic Target for Periodontitis and Its Inhibition by Caffeic Acid Phenethyl Ester In Vitro.

Salivary levels of interleukin-8 (IL-8) are elevated in patients with periodontitis. Caffeic acid phenethyl ester (CAPE) improves the periodontal status in subjects. However, whether CAPE can reduce IL-8 expression is unclear. We collected saliva to determine proinflammatory cytokine levels and used subgingival calculus and surrounding tissues from patients with periodontitis for oral microbiota analysis via 16s ribosomal RNA gene sequencing. THP-1 cells were stimulated with sterile-filtered saliva from patients, and target gene/protein expression was assessed. IL-8 mRNA expression was analyzed in saliva-stimulated THP-1 cells treated with CAPE and the heme oxygenase-1 (HO-1) inhibitor tin-protoporphyrin (SnPP). In 72 symptomatic individuals, IL-8 was correlated with periodontal inflammation (bleeding on probing, r = 0.45; p < 0.001) and disease severity (bleeding on probing, r = 0.45; p < 0.001) but not with the four oral microbiota species tested. Reduced salivary IL-8 secretion was correlated with effective periodontitis treatment (r = 0.37, p = 0.0013). In THP-1 cells, saliva treatment induced high IL-8 expression and IKK2 and nuclear factor-κB (NF-κB) phosphorylation. However, the IKK inhibitor BMS-345541, NF-κB inhibitor BAY 11-7082, and CAPE attenuated saliva-induced IL-8 expression. CAPE induced HO-1 expression and inhibited IKK2, IκBα, and NF-κB phosphorylation. Blocking HO-1 decreased the anti-inflammatory activity of CAPE. The targeted suppression of IL-8 production using CAPE reduces inflammation and periodontitis.

Associations between the phenotype and genotype of MnSOD and catalase in periodontal disease.

BACKGROUND: Periodontal disease is an inflammatory disease in which pathogenic infections trigger a series of inflammatory responses and redox regulation. The hypothesis of this study was that a host's redox regulation, as modified by genetic polymorphisms, may affect periodontal disease activities (including the plaque index (PlI), bleeding on probing (BOP), and pocket depth (PD)) during periodontal therapy. METHODS: In total, 175 patients diagnosed with periodontitis were recruited from the Department of Periodontology, Taipei Medical University Hospital. Both saliva samples and clinical measurements (PlI, BOP, and PD) were taken at the baseline and at 1 month after completing treatment. Salivary manganese superoxide dismutase (MnSOD) and catalase, and corresponding genetic polymorphisms (MnSOD, T47C, rs4880 and Catalase, C-262 T, rs1001179) were determined. The extent of change (Δ) of MnSOD or catalase was calculated by subtracting the concentration after completing treatment from that at the baseline. RESULTS: Subjects who carried the Catalase CC genotype had significantly higher salivary MnSOD or catalase levels. The MnSOD genotype had a significant effect on the percentage of PDs of 4~9 mm (p = 0.02), and salivary ΔMnSOD had a significant effect on the PlI (p = 0.03). The Catalase genotype had a significant effect on the PlI (p = 0.01~0.04), but the effect was not found for the mean PlI or PD. There was a significant interaction between the MnSOD genotype and salivary ΔMnSOD on PDs of 4~9 mm. After adjusting for gender, years of schooling, smoking status, and alcohol consumption, subjects with ΔMnSOD of < 0 µg/ml or Δcatalase of < 0 µg/ml had significantly higher 5.58- or 5.17-fold responses to scaling and root planing treatment. CONCLUSIONS: The MnSOD T47C genotype interferes with the phenotype of salivary antioxidant level, alters MnSOD levels, and influences the PD recovery. MnSOD and catalase gene polymorphism associated with phenotype expression and susceptibility in periodontal root planing treatment responses.

A Cross-Sectional Study of Endogenous Antioxidants and Patterns of Dental Visits of Periodontitis Patients.

Periodontitis is an inflammatory disease, wherein endogenous antioxidants help to balance the inflammatory status. Oral health behaviors are related to the periodontal disease status. The aim of this study was to explore the associations between oral health behaviors and endogenous antioxidants in periodontitis patients. In total, 225 subjects diagnosed with periodontitis were enrolled in the study. Information obtained from the initial interview included socioeconomic and demographic characteristics, lifestyle factors, and oral health-related behaviors. The clinical periodontal parameters evaluated included bleeding on probing (BOP), the plaque index (PI), and probing depth (PD). Stimulated saliva was collected before periodontal therapy to determine five endogenous antioxidants (copper-zinc superoxide dismutase (Cu/Zn SOD), manganese SOD (MnSOD), thioredoxin 1 (Trx1), peroxiredoxin 2 (Prx2), and catalase (CAT)). When these five factors were adjusted for in patients whose last previous dental visit was >1 year, the patients' PI, BOP, and PD showed significant decreases because of an elevation in the Cu/Zn SOD level. Associations of endogenous antioxidants with levels of clinical periodontal parameters were much higher in subjects whose last previous dental visit was >1 year, compared to subjects whose last previous dental visit was <1 year. This study provides a better understanding of dental visit patterns and the salivary endogenous antioxidants that may underlie the symptomatic development of preclinical periodontitis.

Cigarette Smoking Aggravates the Activity of Periodontal Disease by Disrupting Redox Homeostasis- An Observational Study.

The aim of this study was to evaluate the associations between cigarette use and five salivary oxidative stress biomarkers, copper-zinc superoxide dismutase (Cu/Zn SOD), manganese superoxide dismutase (MnSOD), catalase, thioredoxin-1 (TRX1), and peroxiredoxin-2 (PRX2), to assess the effectiveness of non-surgical periodontal therapy. MATERIALS AND METHODS: This is an observational study,167 patients diagnosed with periodontitis were recruited. Both saliva samples and clinical measurements (plaque index (PI), bleeding on probing (BOP), and pocket depth (PD)) were taken at baseline and after completing non-surgical periodontal therapy. The Levels of salivary biomarkers were determined using a MILLIPLEX® MAP Human Oxidative Stress Magnetic Bead Panel kit. The overall reductions in PI and BOP were 31.56% and 42.16%, respectively. BOP reduction after treatment in female or male non-smokers was significantly higher than in male former smokers (p < 0.05). After completing non-surgical periodontal therapy, Cu/ZnSOD, MnSOD, catalase, and Prx2 significantly decreased. There was a significant interaction between smoking status and ΔCu/ZnSOD on PI and a significant interaction between smoking status and ΔCatalase on BOP. CONCLUSIONS: Cigarette smoking interferes with redox homeostasis in the body, alters antioxidants levels, and influences the periodontal disease activity.

RNA Chaperone Function of a Universal Stress Protein in Arabidopsis Confers Enhanced Cold Stress Tolerance in Plants.

The physiological function of Arabidopsis thaliana universal stress protein (AtUSP) in plant has remained unclear. Thus, we report here the functional role of the Arabidopsis universal stress protein, AtUSP (At3g53990). To determine how AtUSP affects physiological responses towards cold stress, AtUSP overexpression (AtUSP OE) and T-DNA insertion knock-out (atusp, SALK_146059) mutant lines were used. The results indicated that AtUSP OE enhanced plant tolerance to cold stress, whereas atusp did not. AtUSP is localized in the nucleus and cytoplasm, and cold stress significantly affects RNA metabolism such as by misfolding and secondary structure changes of RNA. Therefore, we investigated the relationship of AtUSP with RNA metabolism. We found that AtUSP can bind nucleic acids, including single- and double-stranded DNA and luciferase mRNA. AtUSP also displayed strong nucleic acid-melting activity. We expressed AtUSP in RL211 Escherichia coli, which contains a hairpin-loop RNA structure upstream of chloramphenicol acetyltransferase (CAT), and observed that AtUSP exhibited anti-termination activity that enabled CAT gene expression. AtUSP expression in the cold-sensitive Escherichia coli (E. coli) mutant BX04 complemented the cold sensitivity of the mutant cells. As these properties are typical characteristics of RNA chaperones, we conclude that AtUSP functions as a RNA chaperone under cold-shock conditions. Thus, the enhanced tolerance of AtUSP OE lines to cold stress is mediated by the RNA chaperone function of AtUSP.

Effects of Salivary Oxidative Markers on Edentulous Patients' Satisfaction with Prosthetic Denture Treatments: A Pilot Study.

OBJECTIVES: The purpose of this study was to assess relationships among periodontal conditions, salivary antioxidant levels, and patients' satisfaction with their prostheses. METHODS: This study was conducted at the Division of Prosthodontics, Department of Dentistry, Taipei Medical University Hospital. The periodontal condition of patients was based on an assessment of the plaque index (PI) and gingival index (GI). The pH value, flow rate, and buffer capacity of the saliva were estimated. The salivary total antioxidant status (TAS) and superoxide dismutase (SOD) level were also determined. Patients' satisfaction with prosthetic treatments was evaluated using the Chinese version of the short-form Oral Health Impact Profile (OHIP-14C). A multivariate regression model was used to determine whether patients' satisfaction with prosthetic treatment was affected by their oral health status. RESULTS: In total, 35 edentulous patients were recruited. In the Spearman correlation analysis, salivary pH (r = -0.36, p = 0.03) and the buffer ability (r = -0.48, p<0.01) were associated with OHIP-14C scores. In the multivariate analysis, patients who had a higher GI also had a higher score of physical disabilities (ß = 1.38, p = 0.04). Levels of SOD increased with the scores of psychological discomfort (ß = 0.33 U/g protein, p = 0.04). CONCLUSIONS: This study suggested that both the GI and SOD levels were associated with patients' satisfaction with prosthetic treatments. To the best of our knowledge, this is the first study to elucidate the relationship between OHIP scores and salivary oxidative markers in edentulous patients.

Scaling-stimulated salivary antioxidant changes and oral-health behavior in an evaluation of periodontal treatment outcomes.

AIM: Our goal was to investigate associations among scaling-stimulated changes in salivary antioxidants, oral-health-related behaviors and attitudes, and periodontal treatment outcomes. MATERIALS AND METHODS: Thirty periodontitis patients with at least 6 pockets with pocket depths of >5 mm and more than 16 functional teeth were enrolled in the study. Patients were divided into three groups: an abandoned group (AB group), a nonprogress outcome group (NP group), and an effective treatment group (ET group). Nonstimulated saliva was collected before and after scaling were received to determine superoxide dismutase (SOD) and the total antioxidant capacity (TAOC). RESULTS: Salivary SOD following scaling significantly increased from 83.09 to 194.30 U/g protein in patients who had irregular dental visit patterns (<1 visit per year). After scaling, the TAOC was significantly higher in patients who had regular dental visits than in patients who had irregular dental visits (3.52 versus 0.70 mmole/g protein, P < 0.01). The scaling-stimulated increase in SOD was related to a higher severity of periodontitis in the NP group, while the scaling-stimulated increase in the TAOC was inversely related to the severity of periodontitis in the AB group. CONCLUSIONS: These results demonstrate the importance of scaling-stimulated salivary antioxidants as prognostic biomarkers of periodontal treatment.

Detection and determination of solute carbon in grain interior to correlate with the overall carbon content and grain size in ultra-low-carbon steel.

In this study, every effort was exerted to determine and accumulate data to correlate microstructural and compositional elements in ultra-low-carbon (ULC) steels to variation of carbon content (12-44 ppm), manganese (0.18-0.36%), and sulfur (0.0066-0.001%). Quantitative analysis of the ULC steel using optical microscope, scanning electron microscope, transmission electron microscope, and three-dimensional atom probe revealed the decrease of grain size and dislocation density with the increase of carbon contents and/or increase of the final delivery temperature. For a given carbon content, the grain interior carbon concentration increases as the grain size increases.

Study on the microstructures and the magnetic properties of precipitates in a Cu75-Fe5-Ni20 alloy.

The microstructural evolutions of precipitates formed in a Cu75-Fe5-Ni20 alloy on isothermal annealing at 873 K and 1073 K have been investigated by means of transmission electron microscopy (TEM). Nano-scale magnetic particles were formed randomly in the Cu-rich matrix after receiving a short annealing due to phase decomposition in the alloy. With increasing the isothermal annealing time, however, the striking features that two or more nano-scale particles with a cubic shape and a rod shape were aligned linearly along (100) directions were observed on isothermal annealing at 873 K and 1073 K, respectively. To investigate electro-magnetic properties of precipitates in a Cu-Fe-Ni alloy, the superconducting quantum interference device (SQUID) magnetometer and physical property measurement system (PPMS) were also complemented. The present study revealed significant influences that the magnetic properties of the specimens were closely related to the microstructures in the Cu-Fe-Ni alloy, which microstructures significantly depend on the isothermal annealing temperature.

Human blood-derived fibrin releasates: composition and use for the culture of cell lines and human primary cells.

We have evaluated the capacity of two human blood fractions to substitute for FBS as growth medium supplement for human and animal cell cultures. Non-anticoagulated blood from volunteer donors (N = 13) was centrifuged to isolate a supernatant serum (SS) and a platelet-rich fibrin (PRF) clot which was squeezed to extract the releasate (PRFR). Both materials were characterized for the content in PDGF-AB, TGF-ß1, VEGF, bFGF, EGF, IGF, total protein, albumin, IgG, IgM IgA, fibrinogen, cholesterol, triglycerides, various chemistry analytes and hemoglobin. Cell growth promoting activity of pooled SS and PRFR at 1, 5, and 10% in growth medium was evaluated over 7 days using human (HEK293, MG-63) and animal (SIRC, 3T3) cell lines and two human primary cultures (gingival fibroblasts and periodontal ligaments). Viable cell count was compared to that in cultures in FBS free-medium and 10% FBS supplement. SS and PRFR at 1-10% stimulated cell growth significantly more than FBS-free medium and in a way similar to 10% FBS in all cultures apart from 3T3. These two human blood-derived fibrin releasates are equally efficient to substitute for FBS as supplement for cell cultures and could be useful for specialized applications in regenerative medicine, dentistry and oral implantology, or cell therapy.