Comparison of III-V/Si on-chip lasers with etched facet reflectors.

Electrically pumped heterogeneously integrated III-V/SiO2 semiconductor on-chip lasers with different types of etched facet reflectors are designed and fabricated and their lasing performances are characterized and compared. The III-V quantum-well-based epitaxial layers are bonded on silica-on-silicon substrates and fabricated to form Fabry-Perot lasers with dry-etched rear facets. Three types of reflectors are demonstrated, which are etched facets terminated by air, benzocyclobutene, and metal with a thin layer of SiO2 insulator in-between. The laser devices are characterized and compared, including lasing threshold, external quantum efficiency, and output power, and show the impact of different types of etched facet reflectors on lasing performance.

Hetero-core III-V/Si microlaser.

We design and demonstrate optically pumped microlasers with a hetero-core cavity formed by III-V and silicon-on-insulator (SOI) materials. Hetero-core cavities with identical lateral dimension are fabricated. The cavity is formed by III-V layer with thickness of 210 nm on top of SOI layer with thickness of 300 nm via SiO2 interlayer wafer bonding. Continuous wave laser operation is achieved for a diameter down to 2 µm with a corresponding mode volume of 0.07λ3 and quality factor of 1.3×104. The architecture renders an alternative laser structure for heterogeneous laser-on-chip, with no dedicated vertical coupling mechanism needed between the two materials' layers.

Light extraction--a practical consideration for a plasmonic nano-ring laser.

An integrated semiconductor plasmonic nano-ring laser with a connecting output plasmonic waveguide for light extraction is proposed, designed and demonstrated numerically. The maximum light extraction efficiency can be up to 56%. The design was optimized with 2D FDTD and verified with 3D FDTD methods, where close agreement is shown between the two.

Silicon/III-V laser with super-compact diffraction grating for WDM applications in electronic-photonic integrated circuits.

We have demonstrated a heterogeneously integrated III-V-on-Silicon laser based on an ultra-large-angle super-compact grating (SCG). The SCG enables single-wavelength operation due to its high-spectral-resolution aberration-free design, enabling wavelength division multiplexing (WDM) applications in Electronic-Photonic Integrated Circuits (EPICs). The SCG based Si/III-V laser is realized by fabricating the SCG on silicon-on-insulator (SOI) substrate. Optical gain is provided by electrically pumped heterogeneous integrated III-V material on silicon. Single-wavelength lasing at 1550 nm with an output power of over 2 mW and a lasing threshold of around 150 mA were achieved.

New hope for an old cure: a pilot animal study on selective venesection in attenuating the systemic effects of ischaemic-reperfusion injury.

INTRODUCTION: Reperfusion of acutely ischaemic tissue may, paradoxically, lead to systemic complications. This phenomenon is believed to be initiated by humoral factors that have accumulated in the ischaemic tissue. The ancient art of venesection may reduce the load of these mediators at the point of reperfusion. The aim of this study is to test if selective venesection, by removing the initial venous return from the ischaemic tissue, can attenuate the systemic effects of the ischaemic-reperfusion injury using a porcine model of acute limb ischaemia. MATERIALS AND METHODS: The right femoral arteries of anaesthetised female pigs were clamped. Twelve pigs were divided into 2 groups (n = 6 per group). In the treatment group, 5% of blood volume was venesected from the ipsilateral femoral vein upon reperfusion; the other arm served as control. The animals were sacrifi ced after 4 days for histological examination. A pathologist, blinded to the experimental groups, graded the degree of microscopic injury. RESULTS: For the control group, the kidneys showed glomeruli and tubular damage. The livers demonstrated architectural distortion with cellular oedema. There was pulmonary oedema as well as extensive capillary congestion and neutrophil infiltration. Such findings were absent or reduced in the venesected animals. Consequently, the injury scores for the kidney, lung, liver and heart were significantly less for the venesected animals. CONCLUSION: Selective venesection reduces the remote organ injuries of the ischaemic-reperfusion phenomenon.

Surgical management of infected pseudoaneurysms in intravenous drug abusers: single institution experience and a proposed algorithm.

BACKGROUND: Vascular complications from intravenous drug abuse pose significant challenges to vascular surgeons. No formalized policies have been reached on surgical management of the resultant infected pseudoaneurysm. METHODS: A retrospective review of all patients who underwent surgery for pseudoaneurysms due to chronic intravenous drug abuse from July 2005 to February 2008 was performed. RESULTS: A total of 15 patients with infected pseudoaneurysms from chronic intravenous drug abuse were operated on during the study period. The sites of involvement were restricted to the femoral (86.7%) and brachial (13.3%) areas. The drug involved was buprenorphine (Subutex) in all cases. Pain over the limb swelling (100%), pulsatility (60%), and symptoms suggestive of septicemia (46.7%) were the most common symptoms. Staphylococcus aureus was present in 93.3%. Diagnosis was achieved clinically in 26.7%, by duplex ultrasonography in 60.0%, and by computed tomography (CT) angiography in 13.3%. In the two patients with brachial pseudoaneurysms, the brachial artery was ligated in one, and a basilic vein patch was used in the other. In the 13 patients with femoral pseudoaneurysms, the pseudoaneurysm was ligated and excised in 8 (61.5%), and immediate reconstructive bypass surgery was performed in 5 (38.5%). Two patients had critical ischemia after ligation and required reconstructive bypass surgery a few weeks later. Postoperative complications included claudication, digital gangrene, localized wound infection, and rebleeding. There was no associated mortality. CONCLUSIONS: Pseudoaneurysm from intravenous drug abuse continues to pose significant challenges to surgeons worldwide, ranging from an accurate diagnosis to the choice of surgery. The aims of surgery must be to achieve adequate débridement and control infection and hemorrhage. Any associated postoperative complications must be identified and dealt with.

Argon-plasma-induced InAs/InGaAs/InP quantum dot intermixing.

We report the first study of argon (Ar)-plasma-enhanced intermixing of InAs/InGaAs/InP self-assembled quantum dots (QDs) in an inductively coupled plasma reactive ion etch system. The Ar-plasma exposure creates point defects, which propagate into the QD structure and enhance the intermixing between the QDs and their barrier layers, hence tuning the energy bandgap of the QDs. By optimizing the plasma exposure time and the annealing temperature, we observe (i) a blueshift of 160 nm and an increase in the photoluminescence (PL) intensity of the QD samples immediately after Ar-plasma exposure for 90 s, and (ii) a further increase in the blueshift of 330 nm, accompanied by 2.5-times increase in the PL intensity and 37 nm narrowing in the PL linewidth after subsequent rapid thermal annealing at 720 °C. The ability to generate a large blueshift without degrading the material quality shows that Ar-plasma exposure is an efficient post-growth technique for tuning the energy bandgap of QD structures.

High-index-contrast waveguides and devices.

We present a theoretical and experimental study of high-index-contrast waveguides and basic (passive) devices built from them. Several new results are reported, but to be more comprehensive we also review some of our previous results. We focus on a ridge waveguide, whose strong lateral confinement gives it unique properties fundamentally different from the conventional weakly guiding rib waveguides. The ridge waveguides have distinct characteristics in the single-mode and the multimode regimes. The salient features of the single-mode waveguides are their subwavelength width, strong birefringence, relatively high propagation loss, and high sensitivity to wavelength as well as waveguide width, all of which may limit device performance yet provide new opportunities for novel device applications. On the other hand, wider multimode waveguides are low loss and robust. In addition, they have a critical width where the birefringence is minimal or zero, giving rise to the possibility of realizing intrinsically polarization-independent devices. They can be made effectively single mode by employing differential leakage loss (with an appropriate etch depth) or lateral mode filtering (with a taper waveguide). Together these waveguides provide the photonic wire for interconnections and the backbone to build a broad range of compact devices. We discuss basic single-mode devices (based on directional couplers) and multimode devices (multimode interferometers) and indicate their underlying relationship.

Polarization-independent vertical coupler for photonics integration.

We present the first systematic design approach for compact polarization-independent mode-size transformers based on tapered resonant vertical couplers with transfer efficiencies greater than 90%. Resonant coupling occurs at a critical taper width having equal TE and TM effective index. Being polarization-independent broadens the usefulness of vertical coupler as a building block for minimizing insertion loss in photonic integrated circuits.

Transformation between directional couplers and multi-mode interferometers based on ridge waveguides.

We present a unique comparison of ridge-type directional couplers (DC) and multi-mode interferometers (MMI) in terms of their transformational relationship. The two devices are intimately related as the MMI is derived from the DC. We show for the first time the continuous evolution from the two-mode coupling characteristic of DC to the multimode mixing and interference characteristic of MMI, as the DC is structurally transformed into the MMI. We also show that DC can be designed to have the MMI features of compactness and polarization-insensitivity, two traits that reflect their shared lineage. However, the design of DC requires careful control of a large set of design parameters, while the MMI design is more robust and involves fewer design variables.