Two-Phase Particle Image Velocimetry Visualization of Rewetting Flow on the Micropillar Interfacial Surface.

Boiling heat transfer has a high thermal efficiency by latent heat absorption, which makes it an attractive process for cooling electronic device chips. Critical heat flux (CHF), the maximum heat flux, is a crucial factor determining the operating range of the boiling applications. The CHF can be enhanced by improving the fluid supply to the boiling surface. Herein, micropillar interfacial surfaces have been proposed to increase the CHF by increasing the rewetting flow, which determines the fluid-supply capacity near the bubble contact line. A state-of-art two-phase particle image velocimetry (two-phase PIV) technique is introduced for rewetting flow measurement on micropillar structures (MPSs) to analyze the CHF-enhancement mechanism. The two-phase PIV visualization setup offers high spatial (∼120 µm) and temporal (∼2000 Hz) resolutions for measuring rewetting flow during bubble growth. The MPS samples exhibit enhanced CHF and rewetting flows compared to those on a plain surface. The roughest case, D04G10 sample, had a CHF of 164 W/cm2, 1.84 times higher than that of the plain surface. The D04G10 sample also recorded the highest rewetting velocity of 0.311 m/s, 4.7 times higher than that of the plain surface. The comparison between the rewetting flow and wicking performance shows that wicking-induced flow accounted for a substantial part (∼17%) of the rewetting flow and contributed significantly to the CHF enhancement owing to large rewetting flow by delaying vapor-film formation. Based on these findings, a new CHF model suggested by introducing the rewetting parameter shows a high CHF prediction accuracy of 94%.

Flexible Thermocamouflage Materials in Supersonic Flowfields with Selective Energy Dissipation.

Camouflage refers to a creature's behavior to protect itself from predators by assimilating its signature with the environment. In particular, thermal camouflage materials in the infrared (IR) wave are attracting interest for energy, military, and space applications. To date, several types of camouflage materials such as photonic crystals and metal-dielectric-metal structures have been developed. However, flexible camouflage materials still face challenging issues because of the material's brittleness and anomalous dispersion. Herein, we propose flexible thermocamouflage materials (FTCM) for IR camouflage on an arbitrary surface without mechanical failure. Without using a polymer as a dielectric layer, we realized FTCM by changing the unit cell structure discretely. By imaging methods, we verified their flexibility, machinability, and IR camouflage performance. We also measured and calculated the spectral emissivity of FTCM; they showed electromagnetic behavior similar to a conventional emitter. We quantified the IR camouflage performance of FTCM that the emissivity in the undetected band (5-8 µm) is 0.27 and the emissivity values in detected bands are 0.12 (3-5 µm) and 0.16 (8-14 µm) in the detected bands, respectively. Finally, we confirmed the IR camouflage performance on an arbitrary surface in a supersonic flowfield. FTCM are expected to help to improve our basic understanding of metamaterials and find widespread application as IR camouflage materials.

Enhanced Boiling Heat Transfer using Self-Actuated Nanobimorphs.

We present a new concept of a structured surface for enhanced boiling heat transfer that is capable of self-adapting to the local thermal conditions. An array of freestanding nanoscale bimorphs, a structure that consists of two adjoining materials with a large thermal expansion mismatch, is able to deform under local temperature change. Such a surface gradually deforms as the nucleate boiling progresses due to the increase in the wall superheat. The deformation caused by the heated surface is shown to be favorable for boiling heat transfer, leading to about 10% of increase in the critical heat flux compared to a regular nanowire surface. A recently developed theoretical model that accounts for the critical instability wavelength of the vapor film and the capillary wicking force successfully describes the critical heat flux enhancement for the nanobimorph surface with a good quantitative agreement.

Li-Assisted Low-Temperature Phase Transitions in Solution-Processed Indium Oxide Films for High-Performance Thin Film Transistor.

Lithium (Li)-assisted indium oxide (In2O3) thin films with ordered structures were prepared on solution-processed zirconium oxide (ZrO2) gate dielectrics by spin-casting and thermally annealing hydrated indium nitrate solutions with different Li nitrate loadings. It was found that the Li-assisted In precursor films on ZrO2 dielectrics could form crystalline structures even at processing temperatures (T) below 200 °C. Different In oxidation states were observed in the Li-doped films, and the development of such states was significantly affected by both temperature and the mol% of Li cations, [Li(+)]/([In(3+)] + [Li(+)]), in the precursor solutions. Upon annealing the Li-assisted precursor films below 200 °C, metastable indium hydroxide and/or indium oxyhydroxide phases were formed. These phases were subsequently transformed into crystalline In2O3 nanostructures after thermal dehydration and oxidation. Finally, an In2O3 film doped with 13.5 mol% Li(+) and annealed at 250 °C for 1 h exhibited the highest electron mobility of 60 cm(2) V(-1) s(-1) and an on/off current ratio above 10(8) when utilized in a thin film transistor.

Computer-generated holograms of a real three-dimensional object based on stereoscopic video images.

A novel method of using stereoscopic video images to synthesize the computer-generated hologram (CGH) patterns of a real 3D object is proposed. Stereoscopic video images of a real 3D object are captured by a 3D camera system. Disparity maps between the captured stereo image pairs are estimated and from these estimated maps the depth data for each pixel of the object can be extracted on a frame basis. By using these depth data and original color images, hologram patterns of a real object can be computationally generated. In experiments, stereoscopic video images of a real 3D object, a wooden rhinoceros doll, are captured by using the Wasol 3D adapter system and its depth data are extracted from them. Then, CGH patterns of 1280 pixels x 1024 pixels are generated with these depth-annotated images of the wooden rhinoceros doll, and the CGH patterns are experimentally displayed via a holographic display system.