ABSTRACT
In the current study, an acrylic polymer binder applicable to road signs was successfully developed by mixing various acrylic, acrylate-type, and photoinitiator-based monomer species at different acrylate series/silicone acrylate ratios. An amorphous acrylic monomer was used, and the distance between the polymers was increased to improve transparency. The binder was designed with the purpose of reducing the yellowing phenomenon due to resonance by excluding the aromatic ring structure, which is the main cause of yellowing. The optical properties of the binder were determined according to the content of n-butyl methacrylate/methyl methacrylate and the composition of the crosslinking agent in the formulation. Allyl glycidyl ether and dilauroyl peroxide were used to improve the yellowing problem of benzoyl peroxide, an aromatic photoinitiator. Adding a silicone-based trivalent acrylic monomer, 3-(trimethoxysilyl)propyl methacrylate (TMSPMA), was also found to have a significant effect on the transparency, shear properties, and water resistance of the binder. When 15 wt% TMSPMA was added, the best water repellency and mechanical properties were exhibited. The surface morphology of the improved binder and the peeling part were confirmed using field emission scanning electron microscopy. The acrylic polymer developed in this study can be applied in the coating and adhesive industries.
ABSTRACT
It has recently been shown that counter-intuitive Franson-like second-order interference can be observed with a pair of classically correlated pseudo thermal light beams and two separate unbalanced interferometers (UIs): the second-order interference visibility remains fixed at 1/3 even though the path length difference in each UI is increased significantly beyond the coherence length of the pseudo thermal light [Phys. Rev. Lett.119, 223603 (2017)PRLTAO0031-900710.1103/PhysRevLett.119.223603]. However, as the pseudo thermal beam itself originated from a long-coherence laser (and by using a rotating ground disk), there exists the possibility of a classical theoretical model to account for second-order interference beyond the coherence time on the long coherence time of the original laser beam. In this work, we experimentally explore this counter-intuitive phenomenon with a true thermal photon source generated via quantum thermalization, i.e., obtaining a mixed state from a pure two-photon entangled state. This experiment not only demonstrates the unique second-order coherence properties of thermal light clearly but may also open up remote sensing applications based on such effects.
ABSTRACT
Photo-cured 3D architectures are successfully printed using the designed waterborne polyurethane-acrylate (WPUA) formulation. A WPUA series is synthesized in the presence of polycaprolactone diol (PCL) and 4,4'-methylene dicyclohexyl diisocyanate (H12MDI) as the soft segment part, dimethylolbutanoic acid (DMBA) as the emulsifier, and triethylamine (TEA) as the neutralizer, as a function of prepolymer molecular weight. The compatibility of WPUA and the photo-activating acryl monomer is as a key factor to guarantee the high resolution of 3D digital light processing (DLP) printing. The optimized blending formulations are tuned by using triacrylate monomers instead of diacrylate derivatives. For the high-accuracy and fine features of 3D DLP printing, WPUA are designed to be a suitable molecular structure for a 385 nm wavelength source, and the target viscosity is achieved in the range from 150 to 250 Cp. Photo-cured 3D architectures based on WPUA exhibit good flexural strength and high resolution.
