Magnetoelectrocatalysis: Evidence from the Hydrogen Evolution Reaction.

Hydrogen evolution reaction (HER) rates are higher where magnetic gradients are established at electrode surfaces. In comparison of literature data for metals with comparable work functions, we note 1000× higher rates for paramagnetic metals than diamagnetic metals. With unpaired electron spins, paramagnetic and ferromagnetic metals establish interfacial magnetic gradients. At diamagnetic electrodes, gradients are induced by addition of magnetized microparticles. Onset of hydrogen evolution for magnetized γ-Fe2O3 microparticles in Nafion on diamagnetic glassy carbon electrodes is lower by 190 mV (-18 kJ mol-1) relative to demagnetized microparticles. Chemically the same as demagnetized particles, the physical distinction of magnetic field and gradient at magnetized microparticles increases electron transfer rate. For magnetized Fe3O4 microparticles, the onset is lower by 280 mV (-27 kJ mol-1). Paramagnetic platinum electrodes are unaffected by addition of magnetized microparticles. Magnetoelectrocatalysis is established by magnetic gradients.

Electrochemical Detection of Single Aqueous Droplets in Organic Solvents via Pitting Collisions.

We report a novel detection method for single aqueous droplets in organic solvents by the collisional contact of the droplet, inducing the partial deformation of the ultramicroelectrode (UME) surface. For various chemical reactions in organic solvents, water impurities affect the catalytic activity, leading to a loss of productivity and selectivity. Therefore, it is necessary to monitor the water content of organic solvents in real time between many chemical production processes, from the laboratory to the industrial scale. Our method enables the detection of water contamination by real-time monitoring of the electrochemical signals or observing morphological changes in the microelectrode. When an aqueous droplet collides with the UME, the contact area of the electrode is electrolyzed, forming pits on the surface where the droplet falls. Current transient analysis shows a unique current spike corresponding to the reaction inside the adsorbed single aqueous droplet, which differs from those detected by the faradaic/nonfaradaic reaction of collision of other particles. Moreover, this analytical method can record the history of collision events from pits on the UME surface, implying that inspecting the UME surface could be a quick screening method for solvent contamination. Based on a comparison of the electrochemical signals and morphological changes of the electrode after each event, the sizes of the pits and droplets are related. A COMSOL simulation is performed to explain the shape of the peak current and pit formation during collision events. This experimental concept elucidates the dynamic behavior of aqueous droplets on a positively biased metal electrode.

Interplay between electrochemical reactions and mechanical responses in silicon-graphite anodes and its impact on degradation.

Durability of high-energy throughput batteries is a prerequisite for electric vehicles to penetrate the market. Despite remarkable progresses in silicon anodes with high energy densities, rapid capacity fading of full cells with silicon-graphite anodes limits their use. In this work, we unveil degradation mechanisms such as Li+ crosstalk between silicon and graphite, consequent Li+ accumulation in silicon, and capacity depression of graphite due to silicon expansion. The active material properties, i.e. silicon particle size and graphite hardness, are then modified based on these results to reduce Li+ accumulation in silicon and the subsequent degradation of the active materials in the anode. Finally, the cycling performance is tailored by designing electrodes to regulate Li+ crosstalk. The resultant full cell with an areal capacity of 6 mAh cm-2 has a cycle life of >750 cycles the volumetric energy density of 800 Wh L-1 in a commercial cell format.

High-Energy Density Li-O2 Battery with a Polymer Electrolyte-Coated CNT Electrode via the Layer-by-Layer Method.

Li-O2 batteries have attracted considerable attention for several decades due to their high theoretical energy density (>3400 Wh/kg). However, it has not been clearly demonstrated that their actual volumetric and gravimetric energy densities are higher than those of Li-ion batteries. In previous studies, a considerable quantity of electrolyte was usually employed in preparing Li-O2 cells. In general, the electrolyte was considerably heavier than the carbon materials in the cathode, rendering the practical energy density of the Li-O2 battery lower than that of the Li-ion battery. Therefore, air cathodes with significantly smaller electrolyte quantities need to be developed to achieve a high specific energy density in Li-O2 batteries. In this study, we propose a core-shell-structured cathode material with a gel-polymer electrolyte layer covering the carbon nanotubes (CNTs). The CNTs are synthesized using the floating catalyst chemical vapor deposition method. The polymeric layer corresponding to the shell is prepared by the layer-by-layer (LbL) coating method, utilizing Li-Nafion along with PDDA-Cl [poly(diallyldimethylammonium chloride)]. Several bilayers of Li-Nafion and PDDA, on the CNT surface, are successfully prepared and characterized via X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The porous structure of the CNTs is retained after the LbL process, as confirmed by the nitrogen adsorption-desorption profile and BJH pore-size distribution analysis. This porous structure can function as an oxygen channel for facilitating the transport of oxygen molecules for reacting with the Li ions on the cathode surface. These polymeric bilayers can provide an Li-ion pathway, after absorbing a small quantity of an ionic liquid electrolyte, 0.5 M LiTFSI EMI-TFSI [1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide]. Compared to a typical cathode, where only liquid electrolytes are employed, the total quantity of electrolyte in the cathode can be significantly reduced; thereby, the overall cell energy density can be increased. A Li-O2 battery with this core-shell-structured cathode exhibited a high energy density of approximately 390 Wh/kg, which was assessed by directly weighing all of the cell components together, including the gas diffusion layer, the interlayer [a separator containing a mixture of LiTFSI, 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (PYR-14), and PDDA-TFSI], the lithium anode, and the LbL-CNT cathode. The cycle life of the LbL-CNT-based cathode was found to be 31 cycles at a limited capacity of 500 mAh/gcarbon. Although this is not an excellent performance, it is almost 2 times better than that of a CNT cathode without a polymer coating.

Enhanced Electrochemical Stability of Quasi-Solid-State Electrolyte Containing SiO2 Nanoparticles for Li-O2 Battery Applications.

A stable electrolyte is required for use in the open-packing environment of a Li-O2 battery system. Herein, a gelled quasi-solid-state electrolyte containing SiO2 nanoparticles was designed, in order to obtain a solidified electrolyte with a high discharge capacity and long cyclability. We successfully fabricated an organic-inorganic hybrid matrix with a gelled structure, which exhibited high ionic conductivity, thereby enhancing the discharge capacity of the Li-O2 battery. In particular, the improved electrochemical stability of the gelled cathode led to long-term cyclability. The organic-inorganic hybrid matrix with the gelled structure played a beneficial role in improving the ionic conductivity and long-term cyclability and diminished electrolyte evaporation. The experimental and theoretical findings both suggest that the preferential binding between amorphous SiO2 and polyethylene glycol dimethyl ether (PEGDME) solvent led to the formation of the solidified gelled electrolyte and improved electrochemical stability during cycling, while enhancing the stability of the quasi-solid state Li-O2 battery.

Amorphous FeOOH oxygen evolution reaction catalyst for photoelectrochemical water splitting.

Reaching the goal of economical photoelectrochemical (PEC) water splitting will likely require the combination of efficient solar absorbers with high activity electrocatalysts for the hydrogen and oxygen evolution reactions (HER and OER). Toward this goal, we synthesized an amorphous FeOOH (a-FeOOH) phase that has not previously been studied as an OER catalyst. The a-FeOOH films show activity comparable to that of another OER cocatalyst, Co-borate (Co-Bi), in 1 M Na2CO3, reaching 10 mA/cm(2) at an overpotential of ∼550 mV for 10 nm thick films. Additionally, the a-FeOOH thin films absorb less than 3% of the solar photons (AM1.5G) with energy greater than 1.9 eV, are homogeneous over large areas, and act as a protective layer separating the solution from the solar absorber. The utility of a-FeOOH in a realistic system is tested by depositing on amorphous Si triple junction solar cells with a photovoltaic efficiency of 6.8%. The resulting a-FeOOH/a-Si devices achieve a total water splitting efficiency of 4.3% at 0 V vs RHE in a three-electrode configuration and show no decrease in efficiency over the course of 4 h.

Combined charge carrier transport and photoelectrochemical characterization of BiVO4 single crystals: intrinsic behavior of a complex metal oxide.

Bismuth vanadate (BiVO4) is a promising photoelectrode material for the oxidation of water, but fundamental studies of this material are lacking. To address this, we report electrical and photoelectrochemical (PEC) properties of BiVO4 single crystals (undoped, 0.6% Mo, and 0.3% W:BiVO4) grown using the floating zone technique. We demonstrate that a small polaron hopping conduction mechanism dominates from 250 to 400 K, undergoing a transition to a variable-range hopping mechanism at lower temperatures. An anisotropy ratio of ~3 was observed along the c axis, attributed to the layered structure of BiVO4. Measurements of the ac field Hall effect yielded an electron mobility of ~0.2 cm(2) V(-1) s(-1) for Mo and W:BiVO4 at 300 K. By application of the Gärtner model, a hole diffusion length of ~100 nm was estimated. As a result of low carrier mobility, attempts to measure the dc Hall effect were unsuccessful. Analyses of the Raman spectra showed that Mo and W substituted for V and acted as donor impurities. Mott-Schottky analysis of electrodes with the (001) face exposed yielded a flat band potential of 0.03-0.08 V versus the reversible H2 electrode, while incident photon conversion efficiency tests showed that the dark coloration of the doped single crystals did not result in additional photocurrent. Comparison of these intrinsic properties to those of other metal oxides for PEC applications gives valuable insight into this material as a photoanode.

Unbiased photoelectrochemical water splitting in Z-scheme device using W/Mo-doped BiVO4 and Zn(x)Cd(1-x)Se.

Photoelectrochemical water splitting to generate H2 and O2 using only photon energy (with no added electrical energy) has been demonstrated with dual n-type-semiconductor (or Z-scheme) systems. Here we investigated two different Z-scheme systems; one is comprised of two cells with the same metal-oxide semiconductor (W- and Mo-doped bismuth vanadate), that is, Pt-W/Mo-BiVO4, and the other is comprised of the metal oxide and a chalcogenide semiconductor, that is, Pt-W/Mo-BiVO4 and Zn(0.2)Cd(0.8)Se. The redox couples utilized in these Z-scheme configurations were I(-)/IO3(-) or S(2-)/S(n)(2-), respectively. An electrochemical analysis of the system in terms of cell components is shown to illustrate the behavior of the complete photoelectrochemical Z-scheme water-splitting system. H2 gas from the unbiased photolysis of water was detected using gas chromatography-mass spectroscopy and using a membrane-electrode assembly. The electrode configuration to achieve the maximum conversion efficiency from solar energy to chemical energy with the given materials and the Z-scheme is discussed. Here, the possibilities and challenges of Z-scheme unbiased photoelectrochemical water-splitting devices and the materials to achieve practical solar-fuel generation are discussed.

Screening of transition and post-transition metals to incorporate into copper oxide and copper bismuth oxide for photoelectrochemical hydrogen evolution.

A new dispenser and scanner system is used to create and screen Bi-M-Cu oxide arrays for cathodic photoactivity, where M represents 1 of 22 different transition and post-transition metals. Over 3000 unique Bi : M : Cu atomic ratios are screened. Of the 22 metals tested, 10 show a M-Cu oxide with higher photoactivity than CuO and 10 show a Bi-M-Cu oxide with higher photoactivity than CuBi2O4. Cd, Zn, Sn, and Co produce the most photoactive M-Cu oxides, all showing a 200-300% improvement in photocurrent over CuO. Ag, Cd, and Zn produce the highest photoactivity Bi-M-Cu oxides with a 200-400% improvement over CuBi2O4. Most notable is a Bi-Ag-Cu oxide (Bi : Ag : Cu atomic ratio of 22 : 3 : 11) which shows 4 times higher photocurrent than CuBi2O4. This material is capable of evolving hydrogen under illumination in neutral electrolyte solutions at 0.6 V vs. RHE when Pt is added to the surface as an electrocatalyst.