ABSTRACT
Recent advance of high-power laser processing allows for rapid, continuous, area-selective material fabrication, typically represented by laser crystallization of silicon or oxides for display applications. Two-dimensional materials such as graphene exhibit remarkable physical properties and are under intensive development for the manufacture of flexible devices. Here we demonstrate an area-selective ultrafast nanofabrication method using low intensity infrared or visible laser irradiation to direct the self-assembly of block copolymer films into highly ordered manufacturing-relevant architectures at the scale below 12 nm. The fundamental principles underlying this light-induced nanofabrication mechanism include the self-assembly of block copolymers to proceed across the disorder-order transition under large thermal gradients, and the use of chemically modified graphene films as a flexible and conformal light-absorbing layers for transparent, nonplanar, and mechanically flexible surfaces.
ABSTRACT
Crossbar-structured memory comprising 32 × 32 arrays with one selector-one resistor (1S-1R) components are initially fabricated on a rigid substrate. They are transferred without mechanical damage via an inorganic-based laser lift-off (ILLO) process as a result of laser-material interaction. Addressing tests of the transferred memory arrays are successfully performed to verify mitigation of cross-talk on a plastic substrate.
Subject(s)
Electrical Equipment and Supplies , Plastics , Pliability , Computer Simulation , Electric Impedance , Equipment Design , Glass , Lasers , Linear Models , Materials Testing , Microscopy, Electron, Scanning , Microscopy, Electron, Transmission , Nickel/chemistry , Nonlinear Dynamics , Plastics/chemistry , Temperature , Titanium/chemistryABSTRACT
We present the enhancement of wall-plug efficiency in vertical InGaN/GaN light-emitting diodes (V-LEDs) by improved current spreading with a novel Al2O3 current blocking layer (CBL). The Al2O3 CBL deposited by electron-beam evaporation shows high transmittance and good corrosion resistance to acidic solutions. V-LEDs with an Al2O3 CBL show similar light output power but lower forward voltage as compared to those with a SiO2 CBL deposited by plasma-enhanced chemical vapor deposition. As a result, the wall-plug efficiency of V-LEDs with an Al2O3 CBL at 500 mA was improved by 5% as compared to those with a SiO2 CBL, and by 19% as compared to those without a CBL.
