Timing of maternal vaccination against COVID-19 for effective protection of neonates: cohort study.

Introduction: Although the safety and effectiveness of COVID-19 vaccination during pregnancy have been proven, there is still little data explaining neonatal outcomes of maternal pre-pregnancy vaccination. Methods: Here, we investigated the impact of vaccination and SARS-CoV-2 infection on maternal-neonate immune response in a cohort study involving 141 pregnant individuals, and defined the importance of maternal COVID-19 vaccination timing for its effectiveness. Results and discussion: Our data indicate that vertically transferred maternal hybrid immunity provides significantly better antiviral protection for a neonate than either maternal post-infection or post-vaccination immunity alone. Higher neutralization potency among mothers immunized before pregnancy and their newborns highlights the promising role of pre-pregnancy vaccination in neonatal protection. A comparison of neutralizing antibody titers calculated for each dyad suggests that infection and pre-/during-pregnancy vaccination all support transplacental transfer, providing the offspring with strong passive immunity against SARS-CoV-2. Analysis of neutralizing antibody levels in maternal sera collected during pregnancy and later during delivery shows that immunization may exert a positive effect on maternal protection.

Baculovirus Vector-Based Varicella-Zoster Virus Vaccine as a Promising Alternative with Enhanced Safety and Therapeutic Functions.

Varicella-zoster virus (VZV) poses lifelong risks, causing varicella and herpes zoster (HZ, shingles). Currently, varicella and HZ vaccines are predominantly live attenuated vaccines or adjuvanted subunit vaccines utilizing VZV glycoprotein E (gE). Here, we propose our vaccine candidates involving a comparative analysis between recombinant baculoviral vector vaccines (AcHERV) and a live attenuated vaccine strain, vOka. AcHERV vaccine candidates were categorized into groups encoding gE only, VZV glycoprotein B (gB) only, or both gE and gB (gE-gB) as AcHERV-gE, AcHERV-gB, and AcHERV-gE-gB, respectively. Humoral immune responses were evaluated by analyzing total IgG, IgG1, IgG2a, and neutralizing antibodies. Cell-mediated immunity (CMI) responses were evaluated by enzyme-linked immunospot (ELISPOT) assay and Th1/Th2/Th17 cytokine profiling. In the mouse model, AcHERV-gE-gB elicited similar or higher total IgG, IgG2a, and neutralizing antibody levels than vOka and showed robust VZV-specific CMI responses. From the perspective of antigens encoded in vaccines and their relationship with CMI response, both AcHERV-gB and AcHERV-gE-gB demonstrated results equal to or superior to AcHERV-gE, encoding only gE. Taken together, these results suggest that AcHERV-gE-gB can be a novel candidate for alleviating risks of live attenuated vaccine-induced latency and effectively preventing varicella during early stages of life while providing strong CMI for effective resistance against HZ and therapeutic potential in later stages of life.

Valley-centre tandem perovskite light-emitting diodes.

Perovskite light-emitting diodes (PeLEDs) have emerged as a promising new light source for displays. The development roadmap for commercializing PeLEDs should include a tandem device structure, specifically by stacking a thin nanocrystal PeLED unit and an organic light-emitting diode unit, which can achieve a vivid and efficient tandem display; however, simply combining light-emitting diodes with different characteristics does not guarantee both narrowband emission and high efficiency, as it may cause a broadened electroluminescence spectra and a charge imbalance. Here, by conducting optical simulations of the hybrid tandem (h-tandem) PeLED, we have discovered a crucial optical microcavity structure known as the h-tandem valley, which enables the h-tandem PeLED to emit light with a narrow bandwidth. Specifically, the centre structure of the h-tandem valley (we call it valley-centre tandem) demonstrates near-perfect charge balance and optimal microcavity effects. As a result, the h-tandem PeLED achieves a high external quantum efficiency of 37.0% and high colour purity with a narrow full-width at half-maximum of 27.3 nm (versus 64.5 nm in organic light-emitting diodes) along with a fast on-off response. These findings offer a new strategy to overcome the limitations of nanocrystal-based PeLEDs, providing valuable optical and electrical guidelines for integrating different types of light-emitting device into practical display applications.

Baculoviral COVID-19 Delta DNA vaccine cross-protects against SARS-CoV2 variants in K18-ACE2 transgenic mice.

After severe acute respiratory syndrome coronavirus-2 (SARS-CoV2) made the world tremble with a global pandemic, SARS-CoV2 vaccines were developed. However, due to the coronavirus's intrinsic nature, new variants emerged, such as Delta and Omicron, refractory to the vaccines derived using the original Wuhan strain. We developed an HERV-enveloped recombinant baculoviral DNA vaccine against SARS-CoV2 (AcHERV-COVID19S). A non-replicating recombinant baculovirus that delivers the SARS-CoV2 spike gene showed a protective effect against the homologous challenge in a K18-hACE2 Tg mice model; however, it offered only a 50 % survival rate against the SARS-CoV2 Delta variant. Therefore, we further developed the AcHERV-COVID19 Delta vaccine (AcHERV-COVID19D). The AcHERV-COVID19D induced higher neutralizing antibodies against the Delta variant than the prototype or Omicron variant. On the other hand, cellular immunity was similarly high for all three SARS-CoV2 viruses. Cross-protection experiments revealed that mice vaccinated with the AcHERV-COVID19D showed 100 % survival upon challenge with Delta and Omicron variants and 71.4 % survival against prototype SARS-CoV2. These results support the potential of the viral vector vaccine, AcHERV-COVID19D, in preventing the spread of coronavirus variants such as Omicron and SARS-CoV2 variants.

Overcoming the Limitations of MXene Electrodes for Solution-Processed Optoelectronic Devices.

MXenes constitute a rapidly growing family of 2D materials that are promising for optoelectronic applications because of numerous attractive properties, including high electrical conductivity. However, the most widely used titanium carbide (Ti3 C2 Tx ) MXene transparent conductive electrode exhibits insufficient environmental stability and work function (WF), which impede practical applications Ti3 C2 Tx electrodes in solution-processed optoelectronics. Herein, Ti3 C2 Tx MXene film with a compact structure and a perfluorosulfonic acid (PFSA) barrier layer is presented as a promising electrode for organic light-emitting diodes (OLEDs). The electrode shows excellent environmental stability, high WF of 5.84 eV, and low sheet resistance RS of 97.4 Ω sq-1 . The compact Ti3 C2 Tx structure after thermal annealing resists intercalation of moisture and environmental contaminants. In addition, the PFSA surface modification passivates interflake defects and modulates the WF. Thus, changes in the WF and RS are negligible even after 22 days of exposure to ambient air. The Ti3 C2 Tx MXene is applied for large-area, 10 × 10 passive matrix flexible OLEDs on substrates measuring 6 × 6 cm. This work provides a simple but efficient strategy to overcome both the limited environmental stability and low WF of MXene electrodes for solution-processable optoelectronics.

Mechanochemistry-driven engineering of 0D/3D heterostructure for designing highly luminescent Cs-Pb-Br perovskites.

Embedding metal-halide perovskite particles within an insulating host matrix has proven to be an effective strategy for revealing the outstanding luminescence properties of perovskites as an emerging class of light emitters. Particularly, unexpected bright green emission observed in a nominally pure zero-dimensional cesium-lead-bromide perovskite (Cs4PbBr6) has triggered intensive research in better understanding the serendipitous incorporation of emissive guest species within the Cs4PbBr6 host. However, a limited controllability over such heterostructural configurations in conventional solution-based synthesis methods has limited the degree of freedom in designing synthesis routes for accessing different structural and compositional configurations of these host-guest species. In this study, we provide means of enhancing the luminescence properties in the nominal Cs4PbBr6 powder through a guided heterostructural configuration engineering enabled by solid-state mechanochemical synthesis. Realized by an in-depth study on time-dependent evaluation of optical and structural properties during the synthesis of Cs4PbBr6, our target-designed synthesis protocol to promote the endotaxial formation of Cs4PbBr6/CsPbBr3 heterostructures provides key insights for understanding and designing kinetics-guided syntheses of highly luminescent perovskite emitters for light-emitting applications.

Controllable deposition of organic metal halide perovskite films with wafer-scale uniformity by single source flash evaporation.

Conventional solution-processing techniques such as the spin-coating method have been used successfully to reveal excellent properties of organic-inorganic halide perovskites (OHPs) for optoelectronic devices such as solar cell and light-emitting diode, but it is essential to explore other deposition techniques compatible with large-scale production. Single-source flash evaporation technique, in which a single source of materials of interest is rapidly heated to be deposited in a few seconds, is one of the candidate techniques for large-scale thin film deposition of OHPs. In this work, we investigated the reliability and controllability of the single-source flash evaporation technique for methylammonium lead iodide (MAPbI3) perovskite. In-depth statistical analysis was employed to demonstrate that the MAPbI3 films prepared via the flash evaporation have an ultrasmooth surface and uniform thickness throughout the 4-inch wafer scale. We also show that the thickness and grain size of the MAPbI3 film can be controlled by adjusting the amount of the source and number of deposition steps. Finally, the excellent large-area uniformity of the physical properties of the deposited thin films can be transferred to the uniformity in the device performance of MAPbI3 photodetectors prepared by flash evaporation which exhibited the responsivity of 0.2 A/W and detectivity of 3.82 × 1011 Jones.

Water Passivation of Perovskite Nanocrystals Enables Air-Stable Intrinsically Stretchable Color-Conversion Layers for Stretchable Displays.

Conventional organic light-emitting devices without an encapsulation layer are susceptible to degradation when exposed to air, so realization of air-stable intrinsically-stretchable display is a great challenge because the protection of the devices against penetration of moisture and oxygen is even more difficult under stretching. An air-stable intrinsically-stretchable display that is composed of an intrinsically-stretchable electroluminescent device (SELD) integrated with a stretchable color-conversion layer (SCCL) that contains perovskite nanocrystals (PeNCs) is proposed. PeNCs normally decay when exposed to air, but they become resistant to this decay when dispersed in a stretchable elastomer matrix; this change is a result of a compatibility between capping ligands and the elastomer matrix. Counterintuitively, the moisture can efficiently passivate surface defects of PeNCs, to yield significant increases in both photoluminescence intensity and lifetime. A display that can be stretched up to 180% is demonstrated; it is composed of an air-stable SCCL that down-converts the SELD's blue emission and reemits it as green. The work elucidates the basis of moisture-assisted surface passivation of PeNCs and provides a promising strategy to improve the quantum efficiency of PeNCs with the aid of moisture, which allows PeNCs to be applied for air-stable stretchable displays.

Improving the Stability of Metal Halide Perovskite Materials and Light-Emitting Diodes.

Metal halide perovskites (MHPs) have numerous advantages as light emitters such as high photoluminescence quantum efficiency with a direct bandgap, very narrow emission linewidth, high charge-carrier mobility, low energetic disorder, solution processability, simple color tuning, and low material cost. Based on these advantages, MHPs have recently shown unprecedented radical progress (maximum current efficiency from 0.3 to 42.9 cd A-1 ) in the field of light-emitting diodes. However, perovskite light-emitting diodes (PeLEDs) suffer from intrinsic instability of MHP materials and instability arising from the operation of the PeLEDs. Recently, many researchers have devoted efforts to overcome these instabilities. Here, the origins of the instability in PeLEDs are reviewed by categorizing it into two types: instability of (i) the MHP materials and (ii) the constituent layers and interfaces in PeLED devices. Then, the strategies to improve the stability of MHP materials and PeLEDs are critically reviewed, such as A-site cation engineering, Ruddlesden-Popper phase, suppression of ion migration with additives and blocking layers, fabrication of uniform bulk polycrystalline MHP layers, and fabrication of stable MHP nanoparticles. Based on this review of recent advances, future research directions and an outlook of PeLEDs for display applications are suggested.