ABSTRACT
This study investigated catalytic ozone oxidation using a sawdust char (SDW) catalyst to remove hazardous toluene emitted from the chemical industry. The catalyst properties were analyzed by proximate, ultimate, nitrogen adsorption-desorption isotherms, Fourier-transform infrared, and X-ray photoelectron spectroscopy analyses. In addition, hydrogen-temperature programmed reduction experiments were conducted to analyze the catalyst properties. The specific area and formation of micropores of SDC were improved by applying KOH treatment. MnOx/SDC-K3 exhibited a higher toluene removal efficiency of 89.7% after 100 min than MnOx supported on activated carbon (MnOx/AC) with a removal efficiency of 6.6%. The higher (Oads (adsorbed oxygen)+Ov(vacancy oxygen))/OL (lattice oxygen) and Mn3+/Mn4+ ratios of MnOx/SDC-K3 than those of MnOx/AC seemed to be important for the catalytic oxidation of toluene.
ABSTRACT
This study proposes a method to valorize hazardous waste such as used COVID-19 face mask via catalytic gasification over Ni-loaded ZSM-5 type zeolites. The 25% Ni was found as an optimal loading on ZSM-5 in terms of H2 production. Among different zeolites (ZSM-5(30), ZSM-5(80), ZSM-5(280), mesoporous (m)-ZSM-5(30), and HY(30)), 25% Ni/m-ZSM-5(30) led to the highest H2 selectivity (45.04 vol%), most likely because of the highest Ni dispersion on the m-ZSM-5(30) surface, high porosity, and acid site density of the m-ZSM-5(30). The content of N-containing species (e.g., caprolactum and nitriles) in the gasification product was also reduced, when steam was used as gasifying agent, which is the source of potentially hazardous air pollutants (e.g., NOx). The increase in the SiO2/Al2O3 ratio resulted in lower tar conversion and lower H2 generation. At comparable conditions, steam gasification of the mask led to ~15 vol% higher H2 selectivity than air gasification. Overall, the Ni-loaded zeolite catalyst can not only suppress the formation of hazardous substances but also enhance the production of hydrogen from the hazardous waste material such as COVID-19 mask waste.
ABSTRACT
Bio-heavy oil (BHO) is a renewable fuel, but its efficient use is problematic because its combustion may emit hazardous air pollutants (e.g., polycyclic aromatic hydrocarbon (PAH) compounds, NOx, and SOx). Herein, catalytic fast pyrolysis over HZSM-5 zeolite was applied to upgrading BHO to drop-in fuel-range hydrocarbons with reduced contents of hazardous species such as PAH compounds and N- and S-containing species (NOx and SOx precursors). The effects of HZSM-5 desilication and linear low-density polyethylene (LLDPE) addition to the feedstock on hydrocarbon production were explored. The apparent activation energy for the thermal decomposition of BHO was up to 37.5% lowered by desilicated HZSM-5 (DeHZSM-5) compared with HZSM-5. Co-pyrolyzing LLDPE with BHO increased the content of drop-in fuel-range hydrocarbons and decreased the content of PAH compounds. The DeHZSM-5 was effective in producing drop-in fuel-range hydrocarbons from a mixture of BHO and LLDPE and suppressing the formation of N- and S-containing species and PAH compounds. The DeHZSM-5 enhanced the hydrocarbon production by up to 58.5% because of its enhanced porosity and high acid site density compared to its parent HZSM-5. This study experimentally validated that BHO can be upgraded to less hazardous fuel via catalytic fast co-pyrolysis with LLDPE over DeHZSM-5.
Subject(s)
Air Pollution , Biofuels , Biomass , Catalysis , Hazardous Substances , Hot TemperatureABSTRACT
Present study provides biohydrogen production methods from waste furniture via catalytic steam gasification with bio-char catalysts (raw char, KOH-activated char and steam-activated char). Total gas yield for the prepared chars was in the order of KOH-activated char > steam-activated char > raw char, whereas, H2 selectivity was in the sequence of raw char > steam-activated char > KOH-activated char. Though KOH-activated char showed the highest gas yield, highest H2 selectivity was obtained at the gasification experiment with raw char due to the large amount of Ca and K and its reasonable surface area (146.89 m2/g). Although the activation of raw biochar results in the increase of gas yield, it has the negative effect on H2 generation due to the removal of alkali and alkaline earth metals for the KOH activated char and steam-activated char. This study shows that raw bio-char could be a potential solution for eco-friendly hydrogen production.
