Optimization for maximum specific energy density of a lithium-ion battery using progressive quadratic response surface method and design of experiments.

The demand for high-capacity lithium-ion batteries (LIB) in electric vehicles has increased. In this study, optimization to maximize the specific energy density of a cell is conducted using the LIB electrochemical model and sequential approximate optimization (SAO). First, the design of experiments is performed to analyze the sensitivity of design factors important to the specific energy density, such as electrode and separator thicknesses, porosity, and particle size. Then, the design variables of the cell are optimized for maximum specific energy density using the progressive quadratic response surface method (PQRSM), which is one of the SAO techniques. As a result of optimization, the thickness ratio of the electrode was optimized and the porosity was reduced to keep the specific energy density high, while still maintaining the specific power density performance. This led to an increase in the specific energy density of 56.8% and a reduction in the polarization phenomenon of 11.5%. The specific energy density effectively improved through minimum computation despite the nonlinearity of the electrochemical model in PQRSM optimization.

A new cytotoxic prenylated chalcone from Sophora flavescens.

We have isolated a new prenylated chalcone from the roots of Sophora flavescens (Leguminosae). We determined that structure of this compound is 7,9,2',4'-tetrahydroxy-8-isopentenyl-5-methoxychalcone (1) on the basis of spectroscopic analysis (1D and 2D NMR data). Compound 1 exhibited potent cytotoxicity against human acute promyelocytic (HL60), mouse lymphocytic (L1210) and human histiocytic (U937) leukemia cells.

Genotoxic effects of volatile organic compounds in a chemical factory as evaluated by the Tradescantia micronucleus assay and by chemical analysis.

The clastogenic effects of volatile organic compounds in the workplace air of a chemical factory were studied by means of the Tradescantia micronucleus (Trad-MCN) assay and chemical analysis. Sampling was performed at a chemical factory producing PVC film in Cheong-ju, South Korea. Inflorescences of Tradescantia BNL 4430 were placed for 2, 6, and 9 h at the height of 1.40 m at two locations in the workplace and one outdoor of the chemical industry. Air samplings were conducted in the same places and the collected tube samples were analyzed by automatic thermal desorption/gas chromatography/mass spectrometry (ATD/GC/MS). The frequencies of micronuclei in specimens exposed for 2 h in sites 1-3 were 6.13 +/- 0.47, 5.40 +/- 1.60, and 2.93 +/- 0.43 MCN per 100 tetrads, respectively. GC/MS analysis proved the presence of various volatile organic compounds such as trichloroethylene, toluene, ethyl benzene, (m, p, o)-xylene, styrene, 1,3,5-trimethyl benzene, and 1,2,4-trimethyl benzene. Mean values of toluene measured by 2 h sampling in sites 1-3 were 1946.6, 1368.3, and 340.1 microg/m3, respectively. The toluene concentrations in sites 1 and 2 were at least four to six times higher than that in site 3. The micronucleus frequencies increased with exposure time. In addition, there was a correlation between the micronucleus frequencies and toluene concentration in the air (R2 = 0.96). The results of this in situ monitoring proved the applicability of the Trad-MCN assay combined with chemical analysis for monitoring genotoxic chemicals in the work environment.