Environmental aluminum oxide inducing neurodegeneration in human neurovascular unit with immunity.

Aluminum oxide nanoparticle (AlNP), a ubiquitous neurotoxin highly enriched in air pollution, is often produced as an inevitable byproduct in the manufacturing of industrial products such as cosmetics and metal materials. Meanwhile, ALNP has emerged as a significant public health concern due to its potential association with neurological diseases. However, the studies about the neurotoxic effects of AlNP are limited, partially due to the lack of physiologically relevant human neurovascular unit with innate immunity (hNVUI). Here, we employed our AlNP-treated hNVUI model to investigate the underlying mechanism of AlNP-driven neurodegeneration. First, we validated the penetration of AlNP across a blood-brain barrier (BBB) compartment and found AlNP-derived endothelial cellular senescence through the p16 and p53/p21 pathways. Our study showed that BBB-penetrating AlNP promoted reactive astrocytes, which produced a significant level of reactive oxygen species (ROS). The astrocytic neurotoxic factors caused neuronal damage, including the synaptic impairment, the accumulation of phosphoric-tau proteins, and even neuronal death. Our study suggests that AlNP could be a potential environmental risk factor of neurological disorders mediated by neuroinflammation.

Development of in-vitro pulsatile flow generator for evaluating the performance of hemodialysis catheters.

Hemodialysis (HD) using an HD catheter is performed widely on renal failure patients. The catheter was evaluated using the recirculation ratio in pre-clinical status, which is a crucial index indicating its performance. However, pre-clinical in-vivo experiments have limitations: high cost, and ethical issues. Hence, computational and in-vitro methods have been developed as alternatives. However, computational methods require fluid dynamic knowledge, whereas in-vitro experiments are complicated and expensive. In this study, we developed a pulsatile flow generator to mimic blood flow achieving cost effectiveness and user convenience. The device used iterative learning control, achieving blood flow in the superior and inferior vena cava within a 3.3% error. Furthermore, the recirculation ratios were measured based on two insertion directions and two different external pipe materials to evaluate the catheter regarding patients' posture and blood vessel stiffness. The results provide a better understanding of cardiovascular device performance without complicated and costly pre-clinical tests.

Room temperature roll-to-roll additive manufacturing of polydimethylsiloxane-based centrifugal microfluidic device for on-site isolation of ribonucleic acid from whole blood.

Polymer-based lab-on-a-disc (LoaD) devices for isolating ribonucleic acid (RNA) from whole blood samples have gained considerable attention for accurate biomedical analysis and point-of-care diagnostics. However, the mass production of these devices remains challenging in manufacturing cost and sustainability, primarily due to the utilization of a laser cutter or router computer numerical control (CNC) machine for engraving and cutting plastics in the conventional prototyping process. Herein, we reported the first energy-efficient room-temperature printing-imprinting integrated roll-to-roll manufacturing platform for mass production of a polydimethylsiloxane (PDMS)-based LoaD to on-site isolate ribonucleic acid (RNA) from undiluted blood samples. We significantly reduced energy consumption and eliminated thermal expansion variations between the mold, substrate, and resists by accelerating the PDMS curing time to less than 10 min at room temperature without using heat or ultraviolet radiation. The additive manufacturing technology was applied to fabricate a multi-depth flexible polymer mold that integrated macro (2 mm) and micro-sized (500 µm) features, which overcomes the economic and environmental challenges of conventional molding techniques. Our integrated R2R platform was enabled to print adhesion-promoting films at the first printing unit and continuously in-line imprint with a high replication accuracy (99%) for high-volume manufacturing of a new centrifugal microfluidic chip with an enhancement of mixing performance by integrating an efficient mixing chamber and serpentine micromixer. This research paved the way for scalable green manufacturing of large-volume polymer-based microfluidic devices, often required in real-world sample-driven analytical systems for clinical bioanalysis.

Eco-friendly polycaprolactone-bound diatomite filter for the removal of metal ions and micro/nanoplastics from water.

Over the last few decades, pollution levels in aquatic environments due to heavy metal ions and micro/nanoplastics have increased owing to industrial development, causing adverse effects on microorganisms. Adsorbent-based filtration is a well-developed technique for removing contaminants from aquatic environments. However, this technique should be improved from the perspectives of eco-friendliness and cost-effectiveness, as commercial adsorbents require energy-intensive synthesis and post-processing with chelating agents. In this study, an eco-friendly filtration system was developed. This system employs biodegradable, natural materials, such as diatomite to remove metal ions and micro/nanoplastics and polycaprolactone (PCL) to make the free-form shapes. The filter removes metal ions via adsorption and micro/nanoplastics via physical size filtration and adsorption. This PCL-bound diatomite filter was fabricated from a mixture of acetone, PCL, and diatomite, varying its size, thickness, shape, and stacking number for a particular objective and usage. The adsorption capacity, kinetics, and permeation flux of the membrane were measured, and the stacking number of the membranes were optimized to maximize the removal efficiency of the target contaminants. This filter is completely biodegradable, as indicated by the degradation of the PCL binder within 60 days in water, without any treatment. The degradable, eco-friendly PCL-bound diatomite filter is a low-cost and sustainable component that can be utilized in various applications, especially potable drinking water production from river in developing country and filtering the micro/nanoplastics from the commercially bottled drinking water in daily life.

3D printed fluidic swab for COVID-19 testing with improved diagnostic yield and user comfort.

The current standard method of diagnosing coronavirus disease 2019 (COVID-19) involves uncomfortable and invasive nasopharyngeal (NP) sampling using cotton swabs (CS), which can be unsuitable for self-testing. Although mid-turbinate sampling is an alternative, it has a lower diagnostic yield than NP sampling. Nasal wash (NW) has a similar diagnostic yield to NP sampling, but is cumbersome to perform. In this study, we introduce a 3D printed fluidic swab (3DPFS) that enables easy NW sampling for COVID-19 testing with improved diagnostic yield. The 3DPFS comprises a swab head, microchannel, and socket that can be connected to a syringe containing 250 µL of NW solution. The 3DPFS efficiently collects nasal fluid from the surface of the nasal cavity, resulting in higher sensitivity than CS for the detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). This was confirmed by both reverse transcription-quantitative polymerase chain reaction (RT-qPCR) and lateral flow assays (LFA) in virus-spiked nasal samples and clinical samples. Additionally, users reported greater comfort when using the 3DPFS compared to CS. These findings suggest that the 3DPFS can improve the performance of COVID-19 testing by facilitating efficient and less painful nasal sample collection.

Mobile Efficient Diagnostics of Infectious Diseases via On-Chip RT-qPCR: MEDIC-PCR.

The COVID-19 outbreak has caused public and global health crises. However, the lack of on-site fast, reliable, sensitive, and low-cost reverse transcription polymerase chain reaction (RT-PCR) testing limits early detection, timely isolation, and epidemic prevention and control. Here, the authors report a rapid mobile efficient diagnostics of infectious diseases via on-chip -RT-quantitative PCR (RT-qPCR): MEDIC-PCR. First, the authors use a roll-to-roll printing process to accomplish low-cost carbon-black-based disposable PCR chips that enable rapid LED-induced photothermal PCR cycles. The MEDIC-PCR can perform RT (3 min), and PCR (9 min) steps. Further, the cohort of 89 COVID-19 and 103 non-COVID-19 patients testing is completed by the MEDIC-PCR to show excellent diagnostic accuracy of 97%, sensitivity of 94%, and specificity of 98%. This MEDIC-PCR can contribute to the preventive global health in the face of a future pandemic.

Experimental Investigation of Cavitation Bulk Nanobubbles Characteristics: Effects of pH and Surface-Active Agents.

Nanobubbles (NBs) have a widespread application in antimicrobial activity, wastewater treatment, and ecological restoration due to numerous peculiar characteristics, such as small diameter, long-term stability, and ability to produce hydroxyl radicals. Despite significant applications, only limited comprehensive investigations are available on the role of surfactants and pH in NBs characteristics. Therefore, this study examines the effects of different surfactants (i.e., anionic, cationic, and nonionic) and pH medium on bulk NB formation, diameter, concentration, bubble size distribution (BSD), ζ-potential, and stability. The effect of surfactant at concentrations above and below the critical micelle concentration was investigated. NBs were generated in deionized (DI) water using a piezoelectric transducer. The stability of NBs was assessed by tracking the variation in diameter and concentration over time. In a neutral medium, the diameter of NBs is smaller than in other surfactant or pH mediums. The diameter, concentration, BSD, and stability of NBs are strongly influenced by the ζ-potential rather than the solution medium. BSD curve shifts to a smaller bubble diameter when the magnitude of ζ-potential is high in any solution. In pure water, surfactant, and pH mediums, NBs have existed for a long time. NBs have a shorter life span in environments with a pH ≤ 3. Surfactant adsorption on the surface of NBs increases with increasing surfactant concentration up to a certain limit, beyond which it declines substantially. The Derjaguin-Landau-Verwey-Overbeek (DLVO) theory was used to interpret the NBs stability, resulting in a total potential energy barrier that is positive and greater than 45.55 kBT for 6 ≤ pH ≤ 11, whereas for pH < 6, the potential energy barrier essentially vanishes. Moreover, an effort has also been made to explicate the plausible prospect of ion distribution and its alignment surrounding NBs in cationic and anionic surfactants. This study will extend the in-depth investigation of NBs for industrial applications involving NBs.

Diffusiophoresis-enhanced particle deposition for additive manufacturing.

The ability to govern particle assembly in an evaporative-driven additive manufacturing (AM) can realize multi-scale features fundamental to creating printed electronics. However, existing techniques remain challenging and often require templates or contaminating solutes. We explore the control of particle deposition in 3D-printed colloids by diffusiophoresis, a previously unexplored mechanism in multi-scale AM. Diffusiophoresis can introduce spontaneous phoretic particle motion by establishing local solute concentration gradients. We show that diffusiophoresis can play a dominant role in complex evaporative-driven particle assembly, enabling a fundamentally new and versatile control of particle deposition in a multi-scale AM process.

Bioinspired nanoscale hierarchical pillars for extreme superhydrophobicity and wide angular transmittance.

Hierarchical structures in nature provide unique functions for living organisms that can inspire technology. Nanoscale hierarchical structured surfaces are essential to realize the dual functions of non-wetting and transparency for applications such as cover glasses and windows; however, these structures are challenging to fabricate. In this study, nano-hierarchical structured glass surfaces were fabricated using multi-step colloidal lithography and etching to obtain tunable morphology. Nanostructured surfaces of mono-pillar structures of diameter 120 and 350 nm and hierarchical-pillar structures of their combinations exhibited superhydrophobicity after perfluoropolyether coating. In particular, the hierarchical nanosurfaces showed excellent non-wetting properties with the apparent, advancing, and receding water contact angles exceeding 177° and contact angle hysteresis below 1°. Water bouncing behaviors - contact time, spreading diameter, and shape of the bouncing motion were also evaluated according to the Weber number to examine the robustness of superhydrophobicity. Hierarchical nanosurfaces showed larger spreading diameters than mono-nanosurfaces with 14 bounces, indicating minimal energy loss from friction, as can be explained by the effective slip length. Furthermore, the nano-hierarchical structures exhibited better transmittance for wide angles of incidence up to 70° than mono-nanostructures owing to their reduced scattering area and multi-periodicity.

On-chip selection of adenosine aptamer using graphene oxide-coated magnetic nanoparticles.

Systematic evolution of ligands by exponential enrichment (SELEX) is a method that is generally used for developing aptamers, which have arisen the promising alternatives for antibodies. However, conventional SELEX methods have limitations, such as a limited selection of target molecules, time-consuming and complex fabrication processes, and labor-intensive processes, which result in low selection yields. Here, we used (i) graphene oxide (GO)-coated magnetic nanoparticles in the selection process for separation and label-free detection and (ii) a multilayered microfluidic device manufactured using a three-dimensionally printed mold that is equipped with automated control valves to achieve precise fluid flows. The developed on-chip aptamer selection device and GO-coated magnetic nanoparticles were used to screen aptamer candidates for adenosine in eight cycles of the selection process within approximately 2 h for each cycle. Based on results from isothermal titration calorimetry, an aptamer with a dissociation constant of 18.6 ± 1.5 µM was selected. Therefore, the on-chip platform based on GO-coated magnetic nanoparticles provides a novel label-free screening technology for biosensors and micro/nanobiotechnology for achieving high-quality aptamers.

Control of the Drying Patterns for Complex Colloidal Solutions and Their Applications.

The uneven deposition at the edges of an evaporating droplet, termed the coffee-ring effect, has been extensively studied during the past few decades to better understand the underlying cause, namely the flow dynamics, and the subsequent patterns formed after drying. The non-uniform evaporation rate across the colloidal droplet hampers the formation of a uniform and homogeneous film in printed electronics, rechargeable batteries, etc., and often causes device failures. This review aims to highlight the diverse range of techniques used to alleviate the coffee-ring effect, from classic methods such as adding chemical additives, applying external sources, and manipulating geometrical configurations to recently developed advancements, specifically using bubbles, humidity, confined systems, etc., which do not involve modification of surface, particle or liquid properties. Each of these methodologies mitigates the edge deposition via multi-body interactions, for example, particle-liquid, particle-particle, particle-solid interfaces and particle-flow interactions. The mechanisms behind each of these approaches help to find methods to inhibit the non-uniform film formation, and the corresponding applications have been discussed together with a critical comparison in detail. This review could pave the way for developing inks and processes to apply in functional coatings and printed electronic devices with improved efficiency and device yield.

Enhancing Mixing Performance in a Rotating Disk Mixing Chamber: A Quantitative Investigation of the Effect of Euler and Coriolis Forces.

Lab-on-a-CD (LOCD) is gaining importance as a diagnostic platform due to being low-cost, easy-to-use, and portable. During LOCD usage, mixing and reaction are two processes that play an essential role in biochemical applications such as point-of-care diagnosis. In this paper, we numerically and experimentally investigate the effects of the Coriolis and Euler forces in the mixing chamber during the acceleration and deceleration of a rotating disk. The mixing performance is investigated under various conditions that have not been reported, such as rotational condition, chamber aspect ratio at a constant volume, and obstacle arrangement in the chamber. During disk acceleration and deceleration, the Euler force difference in the radial direction causes rotating flows, while the Coriolis force induces perpendicular vortices. Increasing the maximum rotational velocity improves the maximum rotational displacement, resulting in better mixing performance. A longer rotational period increases the interfacial area between solutions and enhances mixing. Mixing performance also improves when there is a substantial difference between Euler forces at the inner and outer radii. Furthermore, adding obstacles in the angular direction also passively promotes or inhibits mixing by configuration. This quantitative investigation provides valuable information for designing and developing high throughput and multiplexed point-of-care LOCDs.

Self-Assembled Monolayers Coated Porous SnO2 Film Gas Sensor with Reduced Humidity Influence.

Metal-oxide sensors, detect gas through the reaction of surface oxygen molecules with target gases, are promising for the detection of toxic pollutant gases, combustible gases, and organic vapors; however, their sensitivity, selectivity, and long-term stability limit practical applications. Porous structure for increasing surface area, adding catalyst, and altering the operation temperature are proposed for enhancing the sensitivity and selectivity. Although humidity can significantly affect the property and stability of the sensors, studies focusing on the long-term stability of gas sensors are scarce. To reduce the effects of humidity, 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTS) was coated on a porous SnO2 film. The interconnected SnO2 nanowires improved the high surface area, and the PFOTS coating provided superhydrophobicity at water contact angle of 159°and perfect water vapor repellency inside E-SEM. The superhydrophobic porous morphology was maintained under relative humidity of 99% and operating temperature of 300 °C. The CO gas sensing of 5, 20, and 50 ppm were obtained with linearity at various humidity. Flame detection was also achieved with practical high humidity conditions. These results suggest the simple way for reliable sensing of nanostructured metal-oxide gas sensors with high sensitivity and long-term stability even in highly humid environments.

From shaping to functionalization of micro-droplets and particles.

The structure of microdroplet and microparticle is a critical factor in their functionality, which determines the distribution and sequence of physicochemical reactions. Therefore, the technology of precisely tailoring their shape is requisite for implementing the user demand functions in various applications. This review highlights various methodologies for droplet shaping, classified into passive and active approaches based on whether additional body forces are applied to droplets to manipulate their functions and fabricate them into microparticles. The passive approaches cover batch emulsification, solvent evaporation and diffusion, micromolding, and microfluidic methods. In active approaches, the external forces, such as electrical and magnetic fields or optical lithography, are applied to microdroplets. Special attention is also given to latest technologies using microdroplets and microparticles, especially in the fields of biological, optical, robotic, and environmental applications. Finally, this review aims to address the advantages and disadvantages of the introduced approaches and suggests the direction for further development in this field.

Dynamic contact angle measurements on lubricant infused surfaces.

HYPOTHESIS: Even though lubricant-infused surfaces (LISs) are known to affect the mobility of working fluid depending on the infused lubricant, previous studies have not yet quantified their slippery property. This study proposes the slippery nature of the LIS can be assessed by dynamic contact angles of the working fluid on the LIS and its scaling model. EXPERIMENTS: We measured the apparent dynamic advancing and receding contact angles on a LIS using a modified Wilhelmy plate technique for the first time. Lubricant having different viscosities was infused into the sanded polytetrafluoroethylene surface to fabricate the LIS. The surface was immersed into or withdrawn from an aqueous glycerol-water solution by varying the capillary number and the lubricant viscosity. FINDINGS: The dynamic contact angles on LIS was found to be sensitive to changes in both the lubricant viscosity and the capillary number. The cube of the dynamic contact angles on the LIS was proportional to θD3~Ca1, which follows a conventional hydrodynamic theory. In addition, the decreasing lubricant viscosity shifted the cube of the dynamic contact angles to high capillary numbers. Our dynamic contact angle data coincided with the prediction from a scaling law derived in this study.

Development of New Hemodialysis Catheter Using Numerical Analysis and Experiments.

A hemodialysis (HD) catheter, especially one with a symmetric tip design, plays an important role in the long-term treatment of patients with renal failure. It is well known that the design of the HD catheter has a considerable effect on blood recirculation and thrombus formation around it, which may cause inefficiencies or malfunctions during HD. However, hemodynamic analyses through parametric studies of its designs have been rarely performed; moreover, only comparisons between the existing models have been reported. In this study, we numerically analyzed the design of the HD catheter's side hole and distal tip for evaluating their effects on hemodynamic factors such as recirculation rate (RR), shear stress, and blood damage index (BDI). The results indicated that a larger side hole and a nozzle-shaped distal tip can significantly reduce the RR and shear stress around the HD catheter. Furthermore, based on these hemodynamic insights, we proposed three new HD catheter designs and compared their performances with existing catheters using numerical and in vitro methods. These new designs exhibited lower RRs and BDI values, thus providing better performance than the existing models. These results can help toward commercialization of more efficient HD catheters.

Electro-Hydrodynamics of Emulsion Droplets: Physical Insights to Applications.

The field of droplet electrohydrodynamics (EHD) emerged with a seminal work of G.I. Taylor in 1966, who presented the so-called leaky dielectric model (LDM) to predict the droplet shapes undergoing distortions under an electric field. Since then, the droplet EHD has evolved in many ways over the next 55 years with numerous intriguing phenomena reported, such as tip and equatorial streaming, Quincke rotation, double droplet breakup modes, particle assemblies at the emulsion interface, and many more. These phenomena have a potential of vast applications in different areas of science and technology. This paper presents a review of prominent droplet EHD studies pertaining to the essential physical insight of various EHD phenomena. Here, we discuss the dynamics of a single-phase emulsion droplet under weak and strong electric fields. Moreover, the effect of the presence of particles and surfactants at the emulsion interface is covered in detail. Furthermore, the EHD of multi-phase double emulsion droplet is included. We focus on features such as deformation, instabilities, and breakups under varying electrical and physical properties. At the end of the review, we also discuss the potential applications of droplet EHD and various challenges with their future perspectives.

Moth-Eye Mimicking Solid Slippery Glass Surface with Icephobicity, Transparency, and Self-Healing.

Slippery liquid-infused porous surfaces (SLIPSs) have been actively studied to improve the limitations of superhydrophobic (SHP) surfaces, especially the defects of the nonwetting chemical coating layer and the weak mechanical robustness of surface micro/nanostructures. However, the SLIPSs also have several drawbacks including volatilization and leakage of lubricant caused by long-term usage. In this study, we suggest the use of icephobic, highly transparent, and self-healing solid slippery surface to overcome the limitations of both surfaces (SLIPS and SHP) by combining specific biomimetic morphology and intrinsic properties of paraffin wax. A moth-eye mimicking nanopillar structure was prepared instead of a porous structure and was coated with solid paraffin wax for water repellence. Moth-eye structures enable high surface transparency based on antireflective effect, and the paraffin layer can recover from damage due to sunlight exposure. Furthermore, the paraffin coating on the nanopillars provides an air trap, resulting in a low heat transfer rate, increasing freezing time and reducing adhesion strength between the ice droplet and the surface. The heat transfer model was also calculated to elucidate the effects of the nanopillar height and paraffin layer thickness. The antireflection and freezing time of the surfaces are enhanced with increase in nanopillar height. The paraffin layer slightly deteriorates the transmittance but enhances the icephobicity. The solar cell efficiency using a biomimetic solid slippery surface is higher than that of bare glass due to the antireflective effect. This integrated biomimetic solid slippery surface is multifunctional due to its self-cleaning, anti-icing, antireflection, and self-healing properties and may replace SLIPS and SHP surfaces.

Deformation of Emulsion Droplet with Clean and Particle-Covered Interface under an Electric Field.

The electrohydrodynamic deformation of an emulsion droplet with a clean and particle-covered interface was explored. Here, the electrohydrodynamic deformation was numerically and experimentally demonstrated under the stimuli of moderate and strong electric fields. The numerical method involves the coupling of the Navier-Stokes equation with the level set equation of interface tracking and the governing equations of so-called leaky dielectric theory. The simulation model developed for a clean interface droplet was then extended to a capsule model for densely particle-covered droplets. The experiments were conducted using various combinations of immiscible oils and particle suspensions while the electric field strength ~105 V/m was generated using a high voltage supply. The experimental images obtained by the camera were post-processed using an in-house image processing code developed on the plat-form of MATLAB software. The results show that particle-free droplets can undergo prolate (deformation in the applied electric field direction) or oblate deformation (deformation that is perpendicular to the direction of the applied electric field) of the droplet interface, whereas the low-conductivity particles can be manipulated at the emulsion interface to form a 'belt', 'helmet' or 'cup' morphologies. A densely particle-covered droplet may not restore to its initial spherical shape due to 'particle jamming' at the interface, resulting in the formation of unique droplet shapes. Densely particle-covered droplets behave like droplets covered with a thin particle sheet, a capsule. The deformation of such droplets is explored using a simulation model under a range of electric capillary numbers (i.e., the ratio of the electric stresses to the capillary stresses acting at the droplet interface). The results obtained are then compared with the theory and experimental findings. It was shown that the proposed simulation model can serve as a tool to predict the deformation/distortion of both the particle-free and the densely particle-covered droplets within the small deformation limit. We believe that this study could provide new findings for the fabrication of complex-shaped species and colloidosomes.

Identifying Fibrillization State of Aß Protein via Near-Field THz Conductance Measurement.

Progressive Alzheimer's disease is correlated with the oligomerization and fibrillization of the amyloid beta (Aß) protein. We identify the fibrillization stage of the Aß protein through label-free near-field THz conductance measurements in a buffer solution. Frequency-dependent conductance was obtained by measuring the differential transmittance of the time-domain spectroscopy in the THz range with a molar concentration of monomer, oligomer, and fibrillar forms of the Aß protein. Conductance at the lower frequency limit was observed to be high in monomers, reduced in oligomers, and dropped to an insulating state in fibrils and increased proportionally with the Aß protein concentration. The monotonic decrease in the conductance at low frequency was dominated by a simple Drude component in the monomer with concentration and nonlinear conductance behaviors in the oligomer and fibril. By extracting the structural localization parameter, a dimensionless constant, with the modified Drude-Smith model, we defined a dementia quotient (DQ) value (0 < De < 1) as a discrete metric for a various Aß proteins at a low concentration of 0.1 µmol/L; DQ = 1.0 ± 0.002 (fibril by full localization, mainly by Smith component), DQ = 0.64 ± 0.013 (oligomer by intermixed localization), and DQ = 0.0 ± 0.000 (monomer by Drude component). DQ values were discretely preserved independent of the molar concentration or buffer variation. This provides plenty of room for the label-free diagnosis of Alzheimer's disease using the near-field THz conductance measurement.