Heterologous expression, purification, and characterization of a recombinant Cordyceps militaris lipase from Candida rugosa-like family in Pichia pastoris.

Multiple sequence alignments of three lipase isoforms from the filamentous fungus, Cordyceps militaris, have revealed that the deduced protein from their common sequence belongs to the Candida rugosa lipase-like group. To express the protein in its active form, recombinant lipase from C. militaris (rCML) was extra cellularly expressed in Pichia pastoris X-33 after removing its signal peptide. Purified rCML was a stable monomeric protein with a molecular mass of 90 kDa, and was highly N-mannosylated compared to the native protein (69 kDa). The catalytic efficiency (kcat/Km) of rCML was greater than the native protein (1244.35 ± 50.88 and 1067.17 ± 29.07 mM-1·min-1, respectively), yet they had similar optimal pH values and temperatures (40 °C and pH 7.0-7.5), and showed preferences for Tween esters and short-chain triacylglycerols. Despite its monomeric conformation, interfacial activation was not observed for rCML, unlike the classical lipases. From the structural model of rCML, the binding pocket of rCML was predicted as a funnel-like structure consisting of a hollow space and an intramolecular tunnel, which is typical of C. rugosa lipase-like lipases. However, a blockage shortened the tunnel to 12-15 Å, which endows strict short-chain selectivity towards triacylglycerols and a perfect match for tricaproin (C6:0). The limited depth of the tunnel may enable accommodation of triacylglycerols with medium-to-long-chain fatty acids, which differentiates rCML from other C. rugosa lipase-like lipases with broad substrate specificities.

Interface Trap Suppression and Electron Doping in Van der Waals Materials Using Cross-Linked Poly(vinylpyrrolidone).

The instability of van der Waals (vdW) materials leads to spontaneous morphological and chemical transformations in the air. Although the passivation of vdW materials with other resistive materials is often used to solve stability issues, this passivation layer can block carrier injection and thus interfere with charge transfer doping. In this study, a facile method is proposed for n-doping and mediation of Se vacancies in tungsten diselenide (WSe2) by poly(vinylpyrrolidone) (PVP) coating. The major carrier type of the PVP-coated WSe2-based field-effect transistor (FET) was converted from hole (p-type) to electron (n-type). Furthermore, the vacancy-induced interface trap density was reduced by approximately 500 times. This study provides a practical doping and passivation method for the van der Waals materials, as well as a comprehensive understanding of the chemical reaction and electronic transport in these materials.

Quasi-2D Halide Perovskite Memory Device Formed by Acid-Base Binary Ligand Solution Composed of Oleylamine and Oleic Acid.

Organometal halide perovskite materials are receiving significant attention for the fabrication of resistive-switching memory devices based on their high stability, low power consumption, rapid switching, and high ON/OFF ratios. In this study, we synthesized 3D FAPbBr3 and quasi-2D (RNH3)2(FA)1Pb2Br7 films using an acid-base binary ligand solution composed of oleylamine (OlAm) and oleic acid in toluene. The quasi-2D (RNH3)2(FA)1Pb2Br7 films were synthesized by controlling the protonated OlAm (RNH3+) solution concentration to replace FA+ cations with large organic RNH3+ cations from 3D FAPbBr3 perovskites. The quasi-2D (RNH3)2(FA)1Pb2Br7 devices exhibited nonvolatile write-once read-many (WORM) memory characteristics, whereas the 3D FAPbBr3 only exhibited hysteresis behavior. Analysis of the 3D FAPbBr3 device indicated operation in the trap-limited space-charge-limited current region. In contrast, quasi-2D (RNH3)2(FA)1Pb2Br7 devices provide low trap density that is completely filled by injected charge carriers and then subsequently form conductive filaments (CFs) to operate as WORM devices. Nanoscale morphology analysis and an associated current mapping study based on conductive atomic force microscopy measurements revealed that perovskite grain boundaries serve as major channels for high current, which may be correlated with the conductive low-resistive-switching behavior and formation of CFs in WORM devices.

Modulation of Junction Modes in SnSe2/MoTe2 Broken-Gap van der Waals Heterostructure for Multifunctional Devices.

We study the electronic and optoelectronic properties of a broken-gap heterojunction composed of SnSe2 and MoTe2 with gate-controlled junction modes. Owing to the interband tunneling current, our device can act as an Esaki diode and a backward diode with a peak-to-valley current ratio approaching 5.7 at room temperature. Furthermore, under an 811 nm laser irradiation the heterostructure exhibits a photodetectivity of up to 7.5 × 1012 Jones. In addition, to harness the electrostatic gate bias, Voc can be tuned from negative to positive by switching from the accumulation mode to the depletion mode of the heterojunction. Additionally, a photovoltaic effect with a fill factor exceeding 41% was observed, which highlights the significant potential for optoelectronic applications. This study not only demonstrates high-performance multifunctional optoelectronics based on the SnSe2/MoTe2 heterostructure but also provides a comprehensive understanding of broken-band alignment and its applications.

Encapsulation of a Monolayer WSe2 Phototransistor with Hydrothermally Grown ZnO Nanorods.

Transition metal dichalcogenides (TMDCs) are promising two-dimensional (2D) materials for realizing next-generation electronics and optoelectronics with attractive physical properties. However, monolayer TMDCs (1LTMDCs) have various serious issues, such as instability under ambient conditions and low optical quantum yield from their extremely thin thickness of ∼0.7 nm. To overcome these issues, we constructed a hybrid structure (HS) by growing zinc oxide nanorods (ZnO NRs) on a monolayer tungsten diselenide (1LWSe2) using the hydrothermal method. Consequently, we confirmed not only enhanced photoluminescence of 1LWSe2 but also improved optoelectronic properties by fabricating the HS phototransistor. Through various investigations, we found that these phenomena were due to the antenna and p-type doping effects attributed to the ZnO NRs. In addition, we verified that the optoelectronic properties of 1LTMDCs are maintained for 2 weeks in ambient condition through the sustainable encapsulation effect induced by our HS. This encapsulation method with inorganic materials is expected to be applied to improve the stability and performance of various emerging 2D material-based devices.

Modulating the Functions of MoS2/MoTe2 van der Waals Heterostructure via Thickness Variation.

Various functional devices including p-n forward, backward, and Zener diodes are realized with a van der Waals heterostructure that are composed of molybdenum disulfide (MoS2) and molybdenum ditelluride (MoTe2) by changing the thickness of the MoTe2 layer and common gate bias. In addition, the available negative differential transconductance of the heterostructure is utilized to fabricate a many-valued logic device that exhibits three different logic states ( i.e., a ternary inverter). Furthermore, the multivalued logic device can be transformed into a binary inverter using laser irradiation. This work provides a comprehensive understanding of the device fabrication and electronic-device design utilizing thickness control.

Parameter control for enhanced peak-to-valley current ratio in a MoS2/MoTe2 van der Waals heterostructure.

The Ids-Vds properties of a van der Waals cross-junction of few layered MoS2/MoTe2 were investigated, and the physical device parameters were altered in order to transform the conduction mechanism from thermionic emission to interband tunneling. The pristine heterostructure demonstrated rectification behavior of typical p-n junction diodes, because of the p-type and n-type nature of MoTe2 and MoS2, respectively. Lowering the contact resistance between the metal and channel materials, by changing the electrode metals from Au to Pd and Ti, alone did not give rise to carrier conduction through the hetero-interband tunneling between MoTe2 and MoS2. In addition to the reduction in contact resistance, the chemical doping of MoS2 using Benzyl Viologen (BV) achieves hetero-interband tunneling between MoTe2 and MoS2, which probably narrows the depletion layer by degenerating MoS2. The peak-to-valley ratio of the tunneling current of the BV-doped heterostructure of MoS2/MoTe2 is about 4.8, which is comparable to that of the commercially available Si tunneling diode.