Desalination at ambient temperature and pressure by a novel class of biporous anisotropic membrane.

Recent scientific advances have made headway in addressing pertinient issues in climate change and the sustainability of our natural environment. This study makes use of a novel approach to desalination that is environment friendly, naturally sustainable and energy efficient, meaning that it is also cost efficient. Evaporation is a key phenomenon in the natural environment and used in many industrial applications including desalination. For a liquid droplet, the vapor pressure changes due to the curved liquid-vapor interface at the droplet surface. The vapor pressure at a convex surface in a pore is, therefore, higher than that at a flat surface due to the capillary effect, and this effect is enhanced as the pore radius decreases. This concept inspired us to design a novel biporous anisotropic membrane for membrane distillation (MD), which enables to desalinate water at ambient temperature and pressure by applying only a small transmembrane temperature gradient. The novel membrane is described as a super-hydrophobic nano-porous/micro-porous composite membrane. A laboratory-made membrane with specifications determined by the theoretical model was prepared for model validation and tested for desalination at different feed inlet temperatures by direct contact MD. A water vapor flux as high as 39.94 ± 8.3 L m-2 h-1 was achieved by the novel membrane at low feed temperature (25 °C, permeate temperature = 20 °C), while the commercial PTFE membrane, which is widely used in MD research, had zero flux under the same operating conditions. As well, the fluxes of the fabricated membrane were much higher than the commercial membrane at various inlet feed temperatures.

Evaluating the potential of superhydrophobic nanoporous alumina membranes for direct contact membrane distillation.

HYPOTHESIS: Direct contact membrane distillation (DCMD) processes exploit water-repellant membranes to desalt warm seawaters by allowing only water vapor to transport across. While perfluorinated membranes/coatings are routinely used for DCMD, their vulnerability to abrasion, heat, and harsh chemicals necessitates alternatives, such as ceramics. Herein, we systematically assess the potential of ceramic membranes consisting of anodized aluminum oxide (AAO) for DCMD. EXPERIMENTS: We rendered AAO membranes superhydrophobic to accomplish the separation of hot salty water (343 K, 0.7 M NaCl) and cold deionized water (292 K) and quantified vapor transport. We also developed a multiscale model based on computational fluid dynamics, conjugate heat transfer, and the kinetic theory of gases to gain insights into our experiments. FINDINGS: The average vapor fluxes, J, across three sets of AAO membranes with average nanochannel diameters (and porosities) centered at 80 nm (32%), 100 nm (37%), and 160 nm (57%) varied by < 25%, while we had expected them to scale with the porosities. Our multiscale simulations unveiled how the high thermal conductivity of the AAO membranes reduced the effective temperature drive for the mass transfer. Our results highlight the limitations of AAO membranes for DCMD and might advance the rational development of desalination membranes.

Fouling development in direct contact membrane distillation: Non-invasive monitoring and destructive analysis.

Fouling development in direct contact membrane distillation (DCMD) for seawater desalination was evaluated combining in-situ monitoring performed using optical coherence tomography (OCT) together with destructive techniques. The non-invasive monitoring with OCT provided a better understanding of the fouling mechanism by giving an appropriate sampling timing for the membrane autopsy. The on-line monitoring system allowed linking the flux trend with the structure of fouling deposited on the membrane surface. The water vapor flux trend was divided in three phases based on the deposition and formation of different foulants over time. The initial flux decline was due to the deposition of a 50-70 nm porous fouling layer consisting of a mixture of organic compounds and salts. Liquid chromatography with organic carbon detection (LC-OCD) analysis revealed the abundance of biopolymer in the fouling layer formed at the initial phase. In the second phase, formation of carbonate crystals on the membrane surface was observed but did not affect the flux significantly. In the last phase, the water vapor flux dropped to almost zero due to the deposition of a dense thick layer of sulfate crystals on the membrane surface.

Application of volume-retarded osmosis and low-pressure membrane hybrid process for water reclamation.

A new concept of volume-retarded osmosis and low-pressure membrane (VRO-LPM) hybrid process was developed and evaluated for the first time in this study. Commercially available forward osmosis (FO) and ultrafiltration (UF) membranes were employed in a VRO-LPM hybrid process to overcome energy limitations of draw solution (DS) regeneration and production of permeate in the FO process. To evaluate its feasibility as a water reclamation process, and to optimize the operational conditions, cross-flow FO and dead-end mode UF processes were individually evaluated. For the FO process, a DS concentration of 0.15 g mL-1 of polysulfonate styrene (PSS) was determined to be optimal, having a high flux with a low reverse salt flux. The UF membrane with a molecular weight cut-off of 1 kDa was chosen for its high PSS rejection in the LPM process. As a single process, UF (LPM) exhibited a higher flux than FO, but this could be controlled by adjusting the effective membrane area of the FO and UF membranes in the VRO-LPM system. The VRO-LPM hybrid process only required a circulation pump for the FO process. This led to a decrease in the specific energy consumption of the VRO-LPM process for potable water production, that was similar to the single FO process. Therefore, the newly developed VRO-LPM hybrid process, with an appropriate DS selection, can be used as an energy efficient water production method, and can outperform conventional water reclamation processes.

Enhanced vapor transport in membrane distillation via functionalized carbon nanotubes anchored into electrospun nanofibres.

To ascertain membrane distillation (MD) as an emerging desalination technology to meet the global water challenge, development of membranes with ideal material properties is crucial. Functionalized carbon nanotubes (CNTs) were anchored to nanofibres of electrospun membranes. Covalent modification and fluorination of CNTs improved their dispersibility and interfacial interaction with the polymer membrane, resulting in well-aligned CNTs inside crystalline fibres with superhydrophobicity. Consideration for the chemical/physical properties of the CNT composite membranes and calculation of their theoretical fluxes revealed the mechanism of MD: CNTs facilitated the repulsive force for Knudsen and molecular diffusions, reduced the boundary-layer effect in viscous flow, and assisted surface diffusion, allowing for fast vapor transport with anti-wetting. This study shows that the role of CNTs and an optimal composite ratio can be used to reduce the gap between theoretical and experimental approaches to desalination.

A novel multi-stage direct contact membrane distillation module: Design, experimental and theoretical approaches.

An economic desalination system with a small scale and footprint for remote areas, which have a limited and inadequate water supply, insufficient water treatment and low infrastructure, is strongly demanded in the desalination markets. Here, a direct contact membrane distillation (DCMD) process has the simplest configuration and potentially the highest permeate flux among all of the possible MD processes. This process can also be easily instituted in a multi-stage manner for enhanced compactness, productivity, versatility and cost-effectiveness. In this study, an innovative, multi-stage, DCMD module under countercurrent-flow configuration is first designed and then investigate both theoretically and experimentally to identify its feasibility and operability for desalination application. Model predictions and measured data for mean permeate flux are compared and shown to be in good agreement. The effect of the number of module stages on the mean permeate flux, performance ratio and daily water production of the MDCMD system has been theoretically identified at inlet feed and permeate flow rates of 1.5 l/min and inlet feed and permeate temperatures of 70 °C and 25 °C, respectively. The daily water production of a three-stage DCMD module with a membrane area of 0.01 m2 at each stage is found to be 21.5 kg.

The impact of fentanyl matrix on pain and function in spinal disorder-related chronic pain: an open label trial in Korea.

STUDY DESIGN: This is a multicenter, open-label prospective, non interventional study. PURPOSE: We wanted to evaluate the impact of fentanyl matrix on the pain and function of patients with spinal disorder-related chronic, non-malignant pain. OVERVIEW OF LITERATURE: Patients with severe non-malignant chronic low back pain may require opioid analgesics for effective pain management. METHODS: A total of 1,576 patients with severe pain (numeric rating scale = 7) were evaluated for their pain intensity at the initial visit and at weeks 4 and 8 (Visits 1, 2, and 3, respectively). Disturbances in sleep, daily living and social activities, the Oswestry Disability Index (ODI), the researchers' and patients' global assessment and the patients' treatment preference were also assessed. RESULTS: The pain intensity score significantly decreased from 8.1 at Visit 1 to 5.4 and 4.4 at Visits 2 and 3, respectively. Sleep disturbance also significantly decreased and the extent of disturbance of daily and social activities was also significantly improved. The ODI significantly decreased from 61.9% to 45.8% and 38.2% at Visits 1, 2, and 3, respectively. Adverse events were reported by 197 (12.5%) patients and severe adverse events were reported by 12 (0.76%) patients. Overall, 76.3% of the patients and 78.4% of the investigators rated the test drug as effective. CONCLUSIONS: The fentanyl matrix is believed to be effective for the treatment of pain, sleep disturbance and the impact upon daily and social activities, yet physicians should pay attention to the risks of abuse and the adverse events.

MFM and gas adsorption isotherm analysis of proton beam irradiated multi-walled carbon nanotubes.

To enhance the gas adsorption properties and modify the physical properties of carbon nanotubes, multi-walled carbon nanotubes (MWCNTs) were irradiated by high-energy proton beams, and the physical properties including morphology and local surface structure were investigated by using a transmission electron microscope (TEM), magnetic force microscope (MFM) and a gas adsorption isotherm apparatus which can deeply probe the fine structure of surface. Interestingly, clearer MFM images were obtained from the proton irradiated samples which supports that carbon exhibits magnetism under proton bombardments, although the intrinsic magnetic property is not understood. The layering properties of argon on MWCNTs were measured from 59 to 69 K and the interaction of argon on the surface was analyzed. The calculated values of isosteric heat of adsorption demonstrated that higher interaction of gas molecules with surface is found from the proton irradiated MWCNTs. This result strongly supports that the local surface modification, partial defects, for example, were created due to the external high energy impacts. Our results are worthy to note that gas adsorption technique can provide the fine atomic resolution which beyond the one of TEM and MFM.

NKT cells inhibit the development of experimental crescentic glomerulonephritis.

CD1d is an MHC class I-like, beta2-microglobulin-associated protein, constitutively expressed by antigen-presenting cells and some epithelial cells, which is recognized by NKT cells, a subpopulation of T cells. CD1d-dependent NKT cells confer protection in immune-mediated disorders, but whether these cells modulate the development of glomerulonephritis is unknown. Experimental crescentic glomerulonephritis was induced by administering anti-glomerular basement membrane antibodies to NKT cell-deficient (CD1d(-/-)) and wild-type mice. Compared with wild-type mice, NKT cell-deficient mice had an accelerated course of glomerulonephritis measured by renal function and crescent formation, and this was abrogated by adoptive transfer of NKT cells. Reconstitution with NKT cells also attenuated intraglomerular expression of TGF-beta1 and decreased phosphorylation of the transcription factors NF-kappaB and IkappaB. Adopted transfer of fluorescence-labeled NKT cells demonstrated their distribution to glomeruli damaged by anti-glomerular basement membrane antibodies but not to the tubulointerstitium. The chemokine CXCL16, which is the ligand for CXCR6 on NKT cells, was upregulated in glomeruli after induction of glomerulonephritis, and NKT cells were present in the same glomeruli. In vitro, NKT cells inhibited LPS-stimulated proliferation of mesangial cells, an affect that was reduced by co-current treatment with an anti-CXCL16 monoclonal antibody. In summary, these findings highlight the regulatory capacity of CD1d-dependent NKT cells in experimental glomerulonephritis and suggest that CXCL16 is involved in the recruitment of these cells to the site of injury.