Blue Phosphorescent Pt(II) Compound Based on Tetradentate Carbazole/2,3'-Bipyridine Ligand and Its Application in Organic Light-Emitting Diodes.

The tetradentate ligand, merging a carbazole unit with high triplet energy and dimethoxy bipyridine, renowned for its exceptional quantum efficiency in coordination with metals like Pt, is expected to demonstrate remarkable luminescent properties. However, instances of tetradentate ligands such as bipyridine-based pyridylcarbazole derivatives remain exceptionally scarce in the current literature. In this study, we developed a tetradentate ligand based on carbazole and 2,3'-bipyridine and successfully complexed it with Pt(II) ions. This novel compound (1) serves as a sky-blue phosphorescent material for use in light-emitting diodes. Based on single-crystal X-ray analysis, compound 1 has a distorted square-planar geometry with a 5/6/6 backbone around the Pt(II) core. Bright sky-blue emissions were observed at 488 and 516 nm with photoluminescent quantum yields of 34% and a luminescent lifetime of 2.6 µs. TD-DFT calculations for 1 revealed that the electronic transition was mostly attributed to the ligand-centered (LC) charge transfer transition with a small contribution from the metal-to-ligand charge transfer transition (MLCT, ~14%). A phosphorescent organic light-emitting device was successfully fabricated using this material as a dopant, along with 3'-di(9H-carbazol-9-yl)-1,1'-biphenyl (mCBP) and 9-(3'-carbazol-9-yl-5-cyano-biphenyl-3-yl)-9H-carbazole-3-carbonitrile (CNmCBPCN) as mixed hosts. A maximum quantum efficiency of 5.2% and a current efficiency of 15.5 cd/A were obtained at a doping level of 5%.

Reactivity of low-valent nickel carbonyl species supported by acridane based PNP ligands towards iodoalkanes.

Nickel monocarbonyl species with Ni(I) and Ni(0) have been synthesized and fully characterized by employing an acriPNP-Ph pincer ligand having a -C(Ph)2- bridge moiety to tether two aromatic rings. To see the effect of the bridge moiety, these complexes were structurally compared with the previously studied nickel complexes supported by PNP and acriPNP-Me ligands and methylation of the nickel carbonyl species was particularly investigated. Since a Ni(I)-CO species is known to be one of the key intermediates during the C-C coupling reaction to give an acetyl species, according to the paramagnetic mechanism of acetyl coenzyme A synthase (ACS), their reactivity toward MeI has been examined. Methylation of a nickel(I)-CO species reveals enhanced C-C coupling when both acriPNP-Me and acriPNP-Ph ligands were used. According to spin density analysis calculated by density functional theory, all Ni(I)-CO species reveal similar spin density at nickel and the carbon atom of CO. X-ray crystallographic data suggest that the corresponding selectivity may be related to the steric influence. For both (acriPNP-Ph)Ni-CO (2) and (acriPNP-Me)Ni-CO (2'), the nickel(I) site is sterically well protected, leading to selective interaction with a methyl radical to give a nickel acyl product. Steric influence was marginally observed when an anionic {(acriPNP-R)Ni-CO}- (R = Me or Ph) species reacted with MeI. The corresponding C-C coupled product was also observed from the methylation of nickel(0)-CO species.

Improvement in Radiative Efficiency Via Intramolecular Charge Transfer in ortho-Carboranyl Luminophores Modified with Functionalized Biphenyls.

In this study, we found that the electronic effects of the functional groups on aromatic units attached to o-carboranyl species can enhance the efficiency of intramolecular charge transfer (ICT)-based radiative decay processes. Six o-carboranyl-based luminophores having attached functionalized biphenyl groups with CF3, F, H, CH3, C(CH3)3, and OCH3 substituents were prepared and fully characterized by multinuclear magnetic resonance spectroscopy. In addition, their molecular structures were determined by single-crystal X-ray diffractometry, which revealed that the distortion of the biphenyl rings and the geometries around the o-carborane cages were similar. All compounds exhibited ICT-based emissions in the rigid state (solution at 77 K and film). Intriguingly, the quantum efficiencies (Φem) of five compounds (that of the group with CF3 could not be measured because of its extremely weak emissions) in the film state increased gradually as the electron-donating power of the terminal functional group modifying the biphenyl moiety increased. Furthermore, the nonradiative decay constants (knr) for the group with OCH3 were estimated to be one-tenth of those for the group with F, whereas the radiative decay constants (kr) for the five compounds were similar. The dipole moments (µ) calculated for the optimized first excited state (S1) structures gradually increased, from that of the group with CF3 to that of the group with OCH3, implying that the inhomogeneity of the molecular charge distribution was enhanced by electron donation. The electron-rich environment formed as a result of electron donation led to efficient charge transfer to the excited state. Both experimental and theoretical findings revealed that the electronic environment of the aromatic moiety in o-carboranyl luminophores can be controlled to accelerate or interrupt the ICT process in the radiative decay of excited states.

High radiative efficiency based on intramolecular charge transfer in a 9,9'-bianthracene-ortho-carboranyl luminophore.

Herein, we prepared an o-carborane compound (9biAT) linked to a 9,9'-bianthracene moiety at each C9-position. The compound exhibited reddish emission in solid and solution states. The solvatochromism effect and theoretical calculation results for the excited (S1) state of 9biAT verified that the emission was attributed to ICT transition. In particular, the structural rigidity and the orthogonal geometry around the carborane enhanced ICT-based emission in the solution state at 298 K, resulting in a considerably high quantum efficiency (Φem = 86%) in cyclohexane. In addition, both the Φem value and radiative decay constant (kr) gradually decreased with an increase in the polarity of the organic solvent. Theoretical modelling of the charge distribution in the S1-optimised geometry revealed that charge recombination in the radiative-relaxation process upon ICT transition could be delayed under polar conditions. Consequently, a high Φem value in the solution state at room temperature can be obtained by maintaining molecular rigidity and controlling the polarity of the environment.

Relationship between the Molecular Geometry and the Radiative Efficiency in Naphthyl-Based Bis-Ortho-Carboranyl Luminophores.

The efficiency of intramolecular charge transfer (ICT)-based emission on π-aromatic-group-appended closo-ortho-carboranyl luminophores is known to be affected by structural fluctuations and molecular geometry, but investigation of this relationship has been in progress to date. In this study, four naphthyl-based bis-o-carboranyl compounds, in which hydrogen (15CH and 26CH) or trimethysilyl groups (15CS and 26CS) were appended at the o-carborane cage, were synthesized and fully characterized. All the compounds barely displayed an emissive trace in solution at 298 K; however, 15CH and 26CH distinctly exhibited a dual emissive pattern in rigid states (in solution at 77 K and in films), attributed to locally excited (LE) and ICT-based emission, while 15CS and 26CS showed strong ICT-based greenish emission. Intriguingly, the molecular structures of the four compounds, analyzed by single X-ray crystallography, showed that the C-C bond axis of the o-carborane cage in the trimethysilyl group-appended compounds 15CS and 26CS were more orthogonal to the plane of the appended naphthyl group than those in 15CH and 26CH. These features indicate that 15CS and 26CS present an efficient ICT transition based on strong exo-π-interaction, resulting in a higher quantum efficiency (Φem) for ICT-based radiative decay than those of 15CH and 26CH. Moreover, the 26CS structure revealed most orthogonal geometry, resulting in the highest Φem and lowest knr values for the ICT-based emission. Consequently, all the findings verified that efficient ICT-based radiative decay of aromatic group-appended o-carboranyl luminophores could be achieved by the formation of a specific geometry between the o-carborane cage and the aromatic plane.

Synthesis, photophysical properties and photo-induced cytotoxicity of novel tris(diazatriphenylene)ruthenium (II) complex.

Novel bipyridine-based heterocyclic building block, 3,10-dichloro-benzo[f][1,10]phenanthroline and its Ruthenium(II) complex have been synthesized and fully characterized. The synthesized Ru(II)-complex is highly luminescent displaying emission at 590 nm with quantum yield of ∼0.8 in methanol. Ru(II) complex showed photocytotoxicity upon 400 nm blue light irradiation. Mechanistic study revealed that photoactivated Ru(II) complex generates reactive radical species which can damage the protein inside the cells and induce cell death even with short irradiation time.

Crucial Factors Regulating Intramolecular Charge-Transfer-Based Radiative Efficiency in ortho-Carboranyl Luminophores: Planarity between Substituted Biphenyl Rings.

o-Carboranyl compounds contain specific geometries, ranging from planar to orthogonally distorted biphenyl rings. Herein, 13 o-carboranyl compounds, 1HF-13PP, were synthesized and fully characterized to determine the impact of structural formation of the aromatic group appended with the o-carborane to estimate the efficiency of their radiative decay process. All the compounds exhibited significant intramolecular charge transfer (ICT)-based emission in the crystalline state at 298 K. Remarkably, increasing the distorted dihedral angles between biphenyl rings gradually decreased the emission efficiencies. Furthermore, their radiative decay constants decreased linearly with increasing dihedral angles, which demonstrated the inversely proportional relationship between these two factors. These findings distinctly suggest that the planar or distorted geometry of substituted aryl groups can strongly affect the efficiency of the ICT-based radiative process in o-carboranyl luminophores.

Strategic molecular design of closo-ortho-carboranyl luminophores to manifest thermally activated delayed fluorescence.

In this paper, we propose a strategic molecular design of closo-o-carborane-based donor-acceptor dyad system that exhibits thermally activated delayed fluorescence (TADF) in the solution state at ambient temperature. Planar 9,9-dimethyl-9H-fluorene-based compounds with closo- and nido-o-carborane cages appended at the C2-, C3-, and C4-positions of each fluorene moiety (closo-type: 2FC, 3FC, 4FC, and 4FCH, and nido-type: nido-4FC = [nido-form of 4FC]·[NBu4]) were prepared and characterized. The solid-state molecular structure of 4FC exhibited a significantly distorted fluorene plane, which suggests the existence of severe intramolecular steric hindrance. In photoluminescence measurements, 4FC exhibits a noticeable intramolecular charge transition (ICT)-based emission in all states (solution at 298 K and 77 K, and solid states); however, emissions by other closo-compounds were observed in only the rigid state (solution at 77 K and film). Furthermore, nido-4FC did not exhibit emissive traces in any state. These observations verify that all radiative decay processes correspond to ICT transitions triggered by closo-o-carborane, which acts as an electron acceptor. Relative energy barriers calculated by TD-DFT as dihedral angles around o-carborane cages change in closo-compounds, which indicates that the structural formation of 4FC is nearly fixed around its S0-optimized structure. This differs from that for other closo-compounds, wherein the free rotation of their o-carborane cages occurs easily at ambient temperature. Such rigidity in the structural geometry of 4FC results in ICT-based emission in solution at 298 K and enhancement of quantum efficiency and radiative decay constants compared to those for other closo-compounds. Furthermore, 4FC displays short-lived (∼0.5 ns) and long-lived (∼30 ns) PL decay components in solution at 298 K and in the film state, respectively, which can be attributed to prompt fluorescence and TADF, respectively. The calculated energy difference (ΔE ST) between the first excited singlet and triplet states of the closo-compounds demonstrate that the TADF characteristic of 4FC originates from a significantly small ΔE ST maintained by the rigid structural fixation around its S0-optimized structure. Furthermore, the strategic molecular design of the o-carborane-appended π-conjugated (D-A) system, which forms a rigid geometry due to severe intramolecular steric hindrance, can enhance the radiative efficiency for ICT-based emission and trigger the TADF nature.

Influence of Electronic Environment on the Radiative Efficiency of 9-Phenyl-9H-carbazole-Based ortho-Carboranyl Luminophores.

The photophysical properties of closo-ortho-carboranyl-based donor-acceptor dyads are known to be affected by the electronic environment of the carborane cage but the influence of the electronic environment of the donor moiety remains unclear. Herein, four 9-phenyl-9H-carbazole-based closo-ortho-carboranyl compounds (1F, 2P, 3M, and 4T), in which an o-carborane cage was appended at the C3-position of a 9-phenyl-9H-carbazole moiety bearing various functional groups, were synthesized and fully characterized using multinuclear nuclear magnetic resonance spectroscopy and elemental analysis. Furthermore, the solid-state molecular structures of 1F and 4T were determined by X-ray diffraction crystallography. For all the compounds, the lowest-energy absorption band exhibited a tail extending to 350 nm, attributable to the spin-allowed π-π* transition of the 9-phenyl-9H-carbazole moiety and weak intramolecular charge transfer (ICT) between the o-carborane and the carbazole group. These compounds showed intense yellowish emission (λem = ~540 nm) in rigid states (in tetrahydrofuran (THF) at 77 K and in films), whereas considerably weak emission was observed in THF at 298 K. Theoretical calculations on the first excited states (S1) of the compounds suggested that the strong emission bands can be assigned to the ICT transition involving the o-carborane. Furthermore, photoluminescence experiments in THF‒water mixtures demonstrated that aggregation-induced emission was responsible for the emission in rigid states. Intriguingly, the quantum yields and radiative decay constants in the film state were gradually enhanced with the increasing electron-donating ability of the substituent on the 9-phenyl group (‒F for 1F < ‒H for 2P < ‒CH3 for 3M < ‒C(CH3)3 for 4T). These features indicate that the ICT-based radiative decay process in rigid states is affected by the electronic environment of the 9-phenyl-9H-carbazole group. Consequently, the efficient ICT-based radiative decay of o-carboranyl compounds can be achieved by appending the o-carborane cage with electron-rich aromatic systems.

Impact of deboronation on the electronic characteristics of closo-o-carborane: intriguing photophysical changes in triazole-appended carboranyl luminophores.

5-Phenyl-1,2,4-triazole-appended closo- (CB1 and CB2) and nido-o-carboranyl (nido-CB1 and nido-CB2) compounds were prepared and fully characterized using multinuclear NMR spectroscopy and elemental analysis. The solid-state molecular structures of both closo-compounds were analyzed by X-ray crystallography. Although the closo-compounds exhibited dual emissive patterns in the rigid state (in THF at 77 K), which were assignable to a π-π* local excitation (LE)-based emission (λem = ca. 380 nm) on the triazole moieties and to an intramolecular charge transfer (ICT)-based emission (ca. 460 nm) in which the o-carborane units acted as the acceptor (A), at 298 K in THF, the LE-based emission dominated. In contrast, the nido-compounds exhibited an intensive emission originating from ICT transitions in which the o-carborane units reversibly acted as the donor (D). In particular, the positive solvatochromic effects of both nido-compounds and the results of theoretical calculations for the o-carboranyl compounds supported the electronic role of the o-carboranyl unit in each compound. Investigation of the radiative decay mechanism of the closo- and nido-compounds using their quantum efficiency (Φem) and decay lifetime (τobs) suggested that the ICT-based radiative decay of nido-compounds occurred more efficiently than the LE-based decay of closo-compounds. These results implied that emission from the closo-compounds was drastically enhanced by the deboronation reaction upon exposure to an increasing concentration of fluoride anions, and finally became similar to the emission color (sky-blue) of the nido-compounds.

Alteration of intramolecular electronic transition via deboronation of carbazole-based o-carboranyl compound and intriguing 'turn-on' emissive variation.

The conversion of closo-o-carborane-containing compounds to the nido-o-species via deboronation causes photophysical changes that could be used for sensing applications. 9-Methyl-9H-carbazole-based closo- (closo-Cz) and nido-o-carboranyl (nido-Cz) compounds were prepared and fully characterised by multinuclear NMR spectroscopy and elemental analysis, and the solid-state molecular structure of closo-Cz was analysed by X-ray crystallography. Although the closo-compound exhibited an emissive pattern centred at λ em = ca. 530 nm in the rigid state only (in THF at 77 K and as a film), nido-Cz demonstrated intense emission in the near-UV region (λ em = ca. 380 nm) in both solution and film states at 298 K. The positive solvatochromic effect of nido-Cz and the results of theoretical calculations for both the o-carboranyl compounds supported that these emissive features originate from intramolecular charge transfer (ICT) corresponding to the o-carborane. Furthermore, the calculations verified that the electronic role of the o-carboranyl unit changed from acceptor to donor upon deboronation from closo-Cz to nido-Cz. Investigations of the radiative decay mechanisms of closo-Cz and nido-Cz according to their quantum efficiencies (Φ em) and decay lifetimes (τ obs) suggested that the ICT-based radiative decays of closo-Cz and nido-Cz readily occur in the film (solid) and solution state, respectively. These observations implied that the emission of closo-Cz in the solution state could be drastically enhanced by deboronation to nido-Cz upon exposure to an increasing concentration of fluoride anions. Indeed, turn-on emissive features in an aqueous solution were observed upon deboronation, strongly suggesting the potential of closo-Cz as a turn-on and visually detectable chemodosimeter for fluoride ion sensing.

Synthesis and Photophysical Properties of a Series of Dimeric Indium Quinolinates.

A novel class of quinolinol-based dimeric indium complexes (1-6) was synthesized and characterized using 1H and 13C(1H) NMR spectroscopy and elemental analysis. Compounds 1-6 exhibited typical low-energy absorption bands assignable to quinolinol-centered π-π* charge transfer (CT) transition. The emission spectra of 1-6 exhibited slight bathochromic shifts with increasing solvent polarity (p-xylene < tetrahydrofuran (THF) < dichloromethane (DCM)). The emission bands also showed a gradual redshift, with an increase in the electron-donating effect of substituents at the C5 position of the quinoline groups. The absolute emission quantum yields (ΦPL) of compounds 1 (11.2% in THF and 17.2% in film) and 4 (17.8% in THF and 36.2% in film) with methyl substituents at the C5 position of the quinoline moieties were higher than those of the indium complexes with other substituents.

Deboronation-Induced Ratiometric Emission Variations of Terphenyl-Based Closo-o-Carboranyl Compounds: Applications to Fluoride-Sensing.

Closo-o-carboranyl compounds bearing the ortho-type perfectly distorted or planar terphenyl rings (closo-DT and closo-PT, respectively) and their nido-derivatives (nido-DT and nido-PT, respectively) were synthesized and fully characterized using multinuclear NMR spectroscopy and elemental analysis. Although the emission spectra of both closo-compounds exhibited intriguing emission patterns in solution at 298 and 77 K, in the film state, closo-DT mainly exhibited a π-π* local excitation (LE)-based emission in the high-energy region, whereas closo-PT produced an intense emission in the low-energy region corresponding to an intramolecular charge transfer (ICT) transition. In particular, the positive solvatochromic effect of closo-PT and theoretical calculation results at the first excited (S1) optimized structure of both closo-compounds strongly suggest that these dual-emissive bands at the high- and low-energy can be assigned to each π-π* LE and ICT transition. Interestingly, both the nido-compounds, nido-DT and nido-PT, exhibited the only LE-based emission in solution at 298 K due to the anionic character of the nido-o-carborane cages, which cannot cause the ICT transitions. The specific emissive features of nido-compounds indicate that the emissive color of closo-PT in solution at 298 K is completely different from that of nido-PT. As a result, the deboronation of closo-PT upon exposure to increasing concentrations of fluoride anion exhibits a dramatic ratiometric color change from orange to deep blue via turn-off of the ICT-based emission. Consequently, the color change response of the luminescence by the alternation of the intrinsic electronic transitions via deboronation as well as the structural feature of terphenyl rings indicates the potential of the developed closo-o-carboranyl compounds that exhibit the intense ICT-based emission, as naked-eye-detectable chemodosimeters for fluoride ion sensing.

Spirobifluorene-Based o-Carboranyl Compounds: Insights into the Rotational Effect of Carborane Cages on Photoluminescence.

9,9'-Spirobifluorene-based closo-o-carboranyl (SFC1 and SFC2) compounds and their nido-derivatives (nido-SFC1 and nido-SFC2) were prepared and characterized. The two closo-compounds displayed major absorption bands assignable to π-π* transitions involving the spirobifluorene group, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene moieties. The nido-compounds exhibited slightly blueshifted absorption bands resulting from the absence of the ICT transitions corresponding to the o-carborane moieties due to the anionic character of the nido-o-carboranes. While SFC1 exhibited only high-energy emissions in THF at 298 K (only from locally excited (LE) states assignable to π-π* transitions on the spirobifluorene group), remarkable emissions in the low-energy region were observed in the rigid state such as in THF at 77 K and in the film state. SFC2 displayed intense emissions in the low-energy region in all states. The fact that neither of the nido-derivatives of SFC1 and SFC2 exhibited low-energy emissions and the TD-DFT calculation results of each closo-compound clearly verified that the low-energy emission was based on ICT-based radiative decay. The conformational barriers from each relative energy calculation upon changing the dihedral angles around the o-carborane cages for both compounds confirmed that the rotation of the o-carborane cages and terminal phenyl rings for SFC1 is freer than that for SFC2.

Photophysical Properties of Spirobifluorene-Based o-Carboranyl Compounds Altered by Structurally Rotating the Carborane Cages.

9,9'-Spirobifluorene-based o-carboranyl compounds C1 and C2 were prepared and fully characterized by multinuclear nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. The solid-state structure of C1 was also determined by single-crystal X-ray diffractometry. The two carboranyl compounds display major absorption bands that are assigned to π-π* transitions involving their spirobifluorene groups, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene groups. While C1 only exhibited high-energy emissions (λem = ca. 350 nm) in THF at 298 K due to locally excited (LE) states assignable to π-π* transitions involving the spirobifluorene group alone, a remarkable emission in the low-energy region was observed in the rigid state, such as in THF at 77 K or the film state. Furthermore, C2 displays intense dual emissive patterns in both high- and low-energy regions in all states. Electronic transitions that were calculated by time-dependent-DFT (TD-DFT) for each compound based on ground (S0) and first-excited (S1) state optimized structures clearly verify that the low-energy emissions are due to ICT-based radiative decays. Calculated energy barriers that are based on the relative energies associated with changes in the dihedral angle around the o-carborane cages in C1 and C2 clearly reveal that the o-carborane cage in C1 rotates more freely than that in C2. All of the molecular features indicate that ICT-based radiative decay is only available to the rigid state in the absence of structural fluctuations, in particular the free-rotation of the o-carborane cage.

Planarity of terphenyl rings possessing o-carborane cages: turning on intramolecular-charge-transfer-based emission.

To clarify the relationship between planarity and intramolecular charge transfer (ICT), two o-carboranyl compounds (TCB and FCB) containing different ortho-type terphenyl rings, namely, perfectly distorted or planar phenyl rings, were synthesised and fully characterised. Although the emission spectra of both compounds presented intriguing dual-emission patterns in solution at 298 or 77 K and in the film state, distorted TCB mostly showed locally excited emission, whereas planar FCB demonstrated intense emission corresponding to an ICT transition. Interestingly, the emission efficiencies and radiative decay constants of terphenyl-based o-carboranyl compounds were gradually enhanced by increasing the planarity of the terphenyl groups. These results verify the existence of a strong relationship between the planarity of appended aryl groups and ICT-based radiative decay in o-carborane-substituted compounds.

Synthesis of o-carborane-functionalized metal-organic frameworks through ligand exchanges for aggregation-induced emission in the solid state.

The carborane (CB)-functionalized ligand was installed in a variety of MOFs through postsynthetic ligand exchange processes. This methodology is a general method for preparing o-CB-functionalized MOFs with known frameworks. Furthermore, the photoluminescence (PL) spectra revealed intriguing aggregation-induced emission (AIE) features following the systematic incorporation of o-CB functionalities into framework-type materials.

Carbazole-Appended Salen-Indium Conjugate Systems: Synthesis and Enhanced Luminescence Efficiency.

Novel carbazole-conjugated salen-In complexes (Cz1 and Cz2) were prepared and fully characterized by 1H and 13C NMR spectroscopy, elemental analysis, and high-resolution mass spectrometry. The major low-energy absorption bands at λabs = 342 nm for Cz1 and 391 nm for Cz2, respectively, are assigned to typical intramolecular charge transfer (ICT) transitions between the carbazole unit and the salen-In center. The solvatochromism effects in various organic solvents and their large Stokes shift distinctly supported the ICT nature. The photoluminescent spectra of Cz1 and Cz2 showed broad emission bands are centered at 459 nm (blue, λex = 354 nm) and 507 nm (green, λex = 396 nm) in THF, respectively, which are typical feature of CT transitions. In particular, Cz1 showed 8-fold enhanced quantum efficiency relative to that of Cz2, at least 10-fold higher than those of the carbazole-free salen-In complexes. Such enhanced luminescence efficiency of Cz1 originated from efficient radiative decay based on the ICT transition between the salen-In moieties and carbazole parts, as well as its structural rigidity in conversion process between the ground (S0) and excited (S1) states. In other words, Cz2 exhibited low quantum yield due to its structural fluctuation, which is free rotation of both the appended carbazole moieties and bridged phenylene rings in conversion between the S0 and S1 structures. Theoretical calculations clearly supported these intriguing results. In addition, these salen-In complexes exhibited high thermal stability (Td5 = 367 °C for Cz1 and 406 °C for Cz2) and electrochemical stability.

A Series of Quinolinol-Based Indium Luminophores: A Rational Design Approach for Manipulating Photophysical Properties.

An approach to the design of a series of quinolinol-based indium complexes that can exhibit different optical properties is proposed. Mono-incorporated (Inq1 and InMeq1), bis-incorporated (InMeq2), and tris-incorporated (Inq3 and InMeq3) indium quinolinate complexes have been prepared. These complexes have also been characterized by X-ray crystallography. The photophysical properties of these complexes have also been examined by a combination of experimental and theoretical techniques. The indium complexes with a single quinolinol ligand (Inq1 and InMeq1) showed higher quantum efficiency than those with two or three quinolinate ligands; in particular, InMeq1 exhibited the highest quantum yield [ΦPL = 59% in poly(methyl methacrylate) film]. The insights into the nature of these findings were obtained by the sequential synthesis of the quinolinol-based indium luminophores and a detailed investigation of their structural stability.

Systematic Control of the Overlapping Energy Region for an Efficient Intramolecular Energy Transfer: Functionalized Salen-Al/Triphenylamine Guest-Host Assemblies.

A series of triphenylamine (TPA)-containing salen-Al assembly dyads, [salen(3- tBu-5-R)2Al(OC6H4- p-N(C6H5)2)] [salen = N, N'-bis(salicylidene)ethylenediamine; R = H (D1), tBu (D2), Ph (D3), OMe (D4), and NMe2 (D5)], were prepared in good yield (50-80%) and fully characterized by NMR spectroscopy and elemental analysis. Both the UV/vis absorption and photoluminescence (PL) spectra of D1-D4, except for D5, in a tetrahydrofuran solution exhibited dual patterns, which are assignable to the salen-Al-centered π-π* transition (low-energy region) and the TPA-centered π-π* transition (high-energy region). In particular, the emission spectra of the dyads displayed interesting dual-emissive patterns via a significant intramolecular energy transfer (IET) process between the salen-Al moiety and TPA group. Notably, this IET process was systematically tuned by varying the substituents and dominantly observed in the rigid state. More interestingly, compared to the salen-Al complexes (A1-A4) without the TPA group, D1-D4 exhibited enhanced quantum efficiencies. Time-dependent density functional theory calculations on the S1-optimized structures of D1-D5 further supported these experimental results by indicating the existence of independent transition states between the salen-Al moiety and TPA group in the assembly dyads. The present study reports the first example of salen-Al complexes bearing electron-rich TPA moieties.