Effects of implant placement timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical canine model.

AIM: To determine the effects of implant timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical model. MATERIALS AND METHODS: Four implant placement protocols were randomly applied at the mesial root sites of the third and fourth mandibular premolars in 10 mongrel dogs: immediate placement (group IP), early placement (group EP), delayed placement with/without alveolar ridge preservation (groups ARP and DP, respectively). A connective-tissue graft (CTG) or porcine-derived volume-stable collagen matrix (VCMX) was applied to enhance the ridge profile (simultaneously with implant placement in group IP and staged for others), resulting in five sites for each combination. All dogs were sacrificed 3 months after soft-tissue grafting. Histological and histomorphometric analyses were performed, and the data were analysed descriptively. RESULTS: CTG and VCMX were difficult to differentiate from the augmented area. The median total tissue thickness on the buccal aspect of the implant was largest in group IP/CTG (between 2.78 and 3.87 mm). The soft-tissue thickness was generally favourable with CTG at all implant placement timings. Within the DP groups, CTG yielded statistically significantly larger total and soft-tissue thickness than VCMX (p < .05). Among the groups with VCMX, group EP/VCMX showed the largest soft-tissue thickness at apical levels to the implant shoulder. CONCLUSIONS: CTG generally led to greater tissue thickness than VCMX.

Multi-omic and functional analysis for classification and treatment of sarcomas with FUS-TFCP2 or EWSR1-TFCP2 fusions.

Linking clinical multi-omics with mechanistic studies may improve the understanding of rare cancers. We leverage two precision oncology programs to investigate rhabdomyosarcoma with FUS/EWSR1-TFCP2 fusions, an orphan malignancy without effective therapies. All tumors exhibit outlier ALK expression, partly accompanied by intragenic deletions and aberrant splicing resulting in ALK variants that are oncogenic and sensitive to ALK inhibitors. Additionally, recurrent CKDN2A/MTAP co-deletions provide a rationale for PRMT5-targeted therapies. Functional studies show that FUS-TFCP2 blocks myogenic differentiation, induces transcription of ALK and truncated TERT, and inhibits DNA repair. Unlike other fusion-driven sarcomas, TFCP2-rearranged tumors exhibit genomic instability and signs of defective homologous recombination. DNA methylation profiling demonstrates a close relationship with undifferentiated sarcomas. In two patients, sarcoma was preceded by benign lesions carrying FUS-TFCP2, indicating stepwise sarcomagenesis. This study illustrates the potential of linking precision oncology with preclinical research to gain insight into the classification, pathogenesis, and therapeutic vulnerabilities of rare cancers.

Design of an Intermediate Die for the Multi-Pass Shape Drawing Process.

The multi-pass shape drawing process is mainly used in metal forming processes to manufacture long components with constant arbitrary cross-sectional shapes along their lengths. The cross-roller guide is a typical component that is manufactured by a multi-pass shape drawing process. The cross-roller guide is mostly used in optical measurement equipment where high-precision movement is required. Therefore, the dimensional accuracy of the cross-roller guide is very important since it can influence precision linear motion. However, the unfilled defects can occur in a case where the product has a complex cross-sectional shape. In this study, a new design method for an intermediate die is suggested by using an equal-radial-velocity variation method in order to reduce the unfilled defects. The proposed design method can reduce the unfilled defects by minimizing the radial velocity variation in the deformation zone of the drawing die. The intermediate die was designed by geometrical information of the final product without prior finite element (FE) analysis. The suggested method was applied to design the multi-pass shape drawing process for manufacturing the cross-roller guide. FE analysis was performed to validate the effectiveness of the proposed method in comparison to the conventional design method that uses equipotential lines in the multi-pass shape drawing process. Finally, a shape drawing experiment was performed to compare the target shape and the FE analysis with the experimental data.

Dimensional ridge changes in conjunction with four implant timing protocols and two types of soft tissue grafts: A pilot pre-clinical study.

AIM: To determine the effect of (1) implant placement timing and (2) the type of soft tissue graft in terms of ridge profile changes. MATERIALS AND METHODS: Four implant treatment modalities were applied in the mesial root areas of the third and fourth mandibular premolars of 10 mongrel dogs alongside connective-tissue graft (CTG) and volume-stable cross-linked collagen matrix (VCMX): immediate, early, and delayed placement (DP), and DP following alveolar ridge preservation (ARP). All dogs were sacrificed 3 months after soft tissue augmentation. Standard Tessellation Language files from designated time points were analysed. RESULTS: Compared with the pre-extraction situation, the median width of the ridge demontstrated a linear increase only in group ARP/CTG (0.07 mm at the 2-mm level), whereas all other groups showed a reduction (between -1.87 and -0.09 mm, p > .05). Groups ARP/CTG (0.17 mm) and DP/CTG (0.05 mm) exhibited a profilometric tissue gain in a set region of interest (p > .05). The net effect of CTG and VCMX ranged from 0.14 to 0.79 mm. CONCLUSIONS: Dimensional ridge changes varied between treatment protocols. ARP with CTG led to the smallest difference in ridge profile between the pre-extraction and the study end time point. Both CTG and VCMX enhanced the ridge contour.

Selective Allowance of Precipitation from Oversaturated Solution Using Surface Structures.

Precipitation is a well-known phenomenon commonly observed in salt ponds. However, it causes pipe clogging in industrial sites, which can be resolved by controlling the direction of precipitation. Herein, we propose a method to control the precipitation direction by changing the structures and properties of the solid surface. Bare, nanostructured, microstructured, and micro/nanostructured surfaces were immersed in the same saturated aqueous NaCl solution, and the heights at which precipitation occurred in the different specimens were compared. On bare and nanostructured surfaces, NaCl deposits as a flat layer on the surface, while on micro and micro/nanostructured surfaces, it forms a thick deposit in a direction perpendicular to the surface. When the same experiment was conducted on surfaces made by patterning different structural surfaces, the precipitates did not spread on the surface with microscale structures. We believe that this novel approach may prove useful in solving the problems caused by precipitation.

A Spherical Hybrid Triboelectric Nanogenerator for Enhanced Water Wave Energy Harvesting.

Water waves are a continuously generated renewable source of energy. However, their random motion and low frequency pose significant challenges for harvesting their energy. Herein, we propose a spherical hybrid triboelectric nanogenerator (SH-TENG) that efficiently harvests the energy of low frequency, random water waves. The SH-TENG converts the kinetic energy of the water wave into solid⁻solid and solid⁻liquid triboelectric energy simultaneously using a single electrode. The electrical output of the SH-TENG for six degrees of freedom of motion in water was investigated. Further, in order to demonstrate hybrid energy harvesting from multiple energy sources using a single electrode on the SH-TENG, the charging performance of a capacitor was evaluated. The experimental results indicate that SH-TENGs have great potential for use in self-powered environmental monitoring systems that monitor factors such as water temperature, water wave height, and pollution levels in oceans.

Synthesis of the Molybdenum Precursor for Slurry-Phase Hydrocracking of Heavy Oil.

In this study, Molybdenum precursors were synthesized with butanoic acid, hexanoic acid, nonanoic acid, decanoic acid, and undecanoic acid. In order to determine chemical structure of Synthesized molybdenum precursors, 1H(13C)-NMR, EA and ICP were used pyrolysis properties were measured TGA. The molybdenum precursors was used for Hydrocracking of Vacuum R1esidue (VR). It was shown that molybdenum nonanoate(3) was shown the lowerst Toluene Insoluble and Gas Product about 2.1 and 5.0 percent.