Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 13 de 13
Filter
Add more filters










Publication year range
1.
Adv Mater ; 34(32): e2202866, 2022 Aug.
Article in English | MEDLINE | ID: mdl-35700272

ABSTRACT

The desire to enhance the efficiency of organic light-emitting devices (OLEDs) has driven to the investigation of advanced materials with fascinating properties. In this work, the efficiency of top-emission OLEDs (TEOLEDs) is enhanced by introducing ampicillin microstructures (Amp-MSs) with dual phases (α-/ß-phase) that induce photoluminescence (PL) and electroluminescence (EL). Moreover, Amp-MSs can adjust the charge balance by Fermi level (EF ) alignment, thereby decreasing the leakage current. The decrease in the wave-guided modes can enhance the light outcoupling through optical scattering. The resulting TEOLED demonstrates a record-high external quantum efficiency (EQE) (maximum: 68.7% and average: 63.4% at spectroradiometer; maximum: 44.8% and average: 42.6% at integrating sphere) with a wider color gamut (118%) owing to the redshift of the spectrum by J-aggregation. Deconvolution of the EL intensities is performed to clarify the contribution of Amp-MSs to the device EQE enhancement (optical scattering by Amp-MSs: 17.0%, PL by radiative energy transfer: 9.1%, and EL by J-aggregated excitons: 4.6%). The proposed TEOLED outperforms the existing frameworks in terms of device efficiency.

2.
ACS Appl Mater Interfaces ; 14(10): 12797-12811, 2022 Mar 16.
Article in English | MEDLINE | ID: mdl-35234455

ABSTRACT

A vital objective in the wetting of Au deposited on chemically heterogeneous oxides is to synthesize a completely continuous, highly crystalline, ultrathin-layered geometry with minimized electrical and optical losses. However, no effective solution has been proposed for synthesizing an ideal Au-layered structure. This study presents evidence for the effectiveness of atomic oxygen-mediated growth of such an ideal Au layer by improving Au wetting on ZnO substrates with a substantial reduction in free energy. The unexpected outcome of the atomic oxygen-mediated Au growth can be attributed to the unconventional segregation and incorporation of atomic oxygen along the outermost boundaries of Au nanostructures evolving in the clustering and layering stages. Moreover, the experimental and numerical investigations revealed the spontaneous migration of atomic oxygen from an interstitial oxygen surplus ZnO bulk to the Au-ZnO interface, as well as the segregation (float-out) of the atomic oxygen toward the top Au surfaces. Thus, the implementation of a 4-nm-thick, two-dimensional, quasi-single-crystalline Au layer with a nearly complete crystalline realignment at a mild temperature (570 K) enabled exceptional optoelectrical performance with record-low resistivity (<7.5 × 10-8 Ω·m) and minimal optical loss (∼3.5%) at a wavelength of 700 nm.

3.
Gut Liver ; 15(6): 922-929, 2021 11 15.
Article in English | MEDLINE | ID: mdl-34053917

ABSTRACT

Background/Aims: For the management of hilar malignant biliary obstruction (HMBO), endoscopic biliary drainage (EBD) is preferred over percutaneous transhepatic biliary drainage (PTBD) because of its convenience. However, there is no established guideline for malignant hilar obstruction that requires multiple stenting. In this study, we compared the efficacy of bilateral metal stents (BMS) versus multiple plastic stents (MPS). Methods: In this retrospective study, we analyzed 102 patients who underwent EBD with either BMS or MPS due to HMBO caused by hilar cholangiocarcinoma between 1996 and 2018 at Samsung Medical Center. We compared the successful drainage rates, cholangitis events, overall complications, mortality, and conversion rates to PTBD between the two groups. Results: The successful drainage rates in the BMS group and the MPS group were 71.4% (25/35) and 65.6% (44/67), respectively, with no significant difference. The MPS group had a higher cholangitis risk (hazard ratio [HR], 2.08; 95% confidence interval [CI], 1.21 to 3.58) and higher 6-month mortality (HR, 2.91; 95% CI, 1.26 to 6.71) than the BMS group. There were no significant differences in overall complications or the conversion rate to PTBD between the groups. Conclusions: In patients with malignant HMBO, the BMS group showed better outcomes in terms of the cholangitis rate and 6-month mortality than the MPS group. Therefore, if possible, bilateral metal stenting is recommended for HMBO caused by hilar cholangiocarcinoma.


Subject(s)
Bile Duct Neoplasms , Cholangiocarcinoma , Cholestasis , Bile Duct Neoplasms/complications , Bile Duct Neoplasms/surgery , Bile Ducts, Intrahepatic/surgery , Cholangiocarcinoma/complications , Cholangiocarcinoma/surgery , Cholangiopancreatography, Endoscopic Retrograde , Cholestasis/etiology , Cholestasis/surgery , Drainage , Humans , Plastics , Retrospective Studies , Stents , Treatment Outcome
4.
Infect Chemother ; 53(4): 797-801, 2021 Dec.
Article in English | MEDLINE | ID: mdl-32869552

ABSTRACT

Cushing's syndrome is characterized by excessive cortisol and immuno-suppression. We experienced a case of Cushing's syndrome caused by adrenocortical carcinoma that was complicated by multiple opportunistic infections. A 37-year-old woman with adrenocortical carcinoma (ACC) presented with decreased mental ability and high fever one week after undergoing chemotherapy. Her initial blood culture revealed methicillin-resistant Staphylococcus aureus (MRSA) bacteremia accompanied by septic pneumonia. We admitted her to the intensive care unit and treated her for invasive pulmonary aspergillosis (IPA), Pneumocystis jirovecii pneumonia (PJP), candidemia, and Stenotrophomonas maltophilia pneumonia with broad-spectrum antibiotics and antifungal agents. Nevertheless, her clinical course worsened and she died. Herein, we report a case of Cushing's syndrome associated with cortisol-secreting ACC that presented with multiple opportunistic infections, including MRSA bacteremia, septic pneumonia, candidemia, PJP, and IPA, illuminating a relationship between hypercortisolemia and opportunistic infections.

5.
Acta Crystallogr B Struct Sci Cryst Eng Mater ; 76(Pt 2): 225-232, 2020 Apr 01.
Article in English | MEDLINE | ID: mdl-32831224

ABSTRACT

Reversible solvent-triggered single-crystal-to-single-crystal (SCSC) transformations are observed between two copper(II) azamacrocyclic complexes: [Cu(C16H38N6)(H2O)2](C12H6O4) (1) and [Cu(C16H38N6)(C12H6O4)] (2). Complex (1) was prepared via self-assembly of a copper(II) azamacrocyclic complex containing butyl pendant groups, [Cu(C16H38N6)(ClO4)2], with 2,7-naphthalenedicarboxylic acid. When monomeric compound (1) was immersed in CH3OH, coordination polymer (2) was obtained, indicating a solvent-triggered SCSC transformation. Furthermore, when (2) was immersed in water, an reverse SCSC transformation from (2) to (1) occurred. Complex (1) presents a 3D supramolecular structure formed via intermolecular hydrogen-bonding interactions, whereas complex (2) features a 1D zigzag coordination polymer. The reversible SCSC transformation of (1) and (2) was characterized using single-crystal X-ray diffraction and in situ powder X-ray diffraction techniques. Despite its poor porosity, complex (2) displayed interesting CO2 adsorption behaviour under CO2 gas.

6.
Nanoscale ; 12(3): 1749-1758, 2020 Jan 23.
Article in English | MEDLINE | ID: mdl-31895376

ABSTRACT

Artificially designing the crystal orientation and facets of noble metal nanoparticles is important to realize unique chemical and physical features that are very different from those of noble metals in bulk geometries. However, relative to their counterparts synthesized in wet-chemical processes, vapor-depositing noble metal nanoparticles with the desired crystallographic features while avoiding any notable impurities is quite challenging because this task requires breaking away from the thermodynamically favorable geometry of nanoparticles. We used plasma-generated N atoms as a surface-active agent, a so-called surfactant, to control the structural development of Ag nanoparticles supported on a chemically heterogeneous ZnO substrate. The N-surfactant-facilitated sputter deposition provided strong selectivity for crystalline orientation and facets, leading to a highly flattened nanoparticle shape that clearly deviated from the energetically favorable spherical polyhedra, due to the drastic decreases in the surface free energies of Ag nanoparticles in the presence of the N surfactant. The Ag nanoparticles successively developed a nearly unidirectional (111) orientation aligned by stimulating the crystalline coupling of Ag along the orientation of the ZnO substrate. The experimental and simulation results not only offer new insights into the advantages of N as a surfactant for the orientation and shape-controlled synthesis of Ag nanoparticles via sputter deposition but also provide the first solid evidence validating that immiscible, nonresidual gaseous surfactants can be used in the vapor deposition processes of noble metal nanoparticles to manipulate their surface free energies.

7.
ACS Appl Mater Interfaces ; 10(47): 40901-40910, 2018 Nov 28.
Article in English | MEDLINE | ID: mdl-30379522

ABSTRACT

Controlling the shape and crystallography of nanocrystals during the early growth stages of a noble metal layer is important because of its correlation with the final layer morphology and optoelectrical features, but this task is unattainable in vapor deposition processes dominated by artificially uncontrollable thermodynamic free energies. We report on experimental evidence for the controllable evolution of Ag nanocrystals as induced by the addition of nitrogen, presumed to be nonresidual in the Ag lattice given its strong float-out behavior. This atypical formation of energetically stable Ag nanocrystals with significantly improved wetting abilities on a chemically heterogeneous substrate promotes the development of an atomically flat, ultrathin, high-purity Ag layer with a thickness of only 5 nm. This facilitates the fabrication of Ag thin-film electrodes exhibiting highly enhanced optical transparency over a broad spectral range in the visible and near-infrared spectral range. An Ag thin-film electrode with a ZnO/Ag/ZnO configuration exhibits an average transmittance of about 95% in the spectral range of 400-800 nm with a maximum transmittance of over 98% at 580 nm, which is comparable with the best transparency values so far reported for transparent electrodes. This degree of optical transparency provides an excellent chance to improve the photon absorption of photovoltaic devices employing an Ag thin film as their window electrode. This is clearly confirmed by the superior performance of a flexible organic solar cell with a power conversion efficiency of 8.0%, which is far superior to that of the same solar cell using a conventional amorphous indium tin oxide electrode (6.4%).

8.
ACS Appl Mater Interfaces ; 10(32): 27510-27520, 2018 Aug 15.
Article in English | MEDLINE | ID: mdl-30028116

ABSTRACT

Improving the wetting ability of Ag on chemically heterogeneous oxides is technically important to fabricate ultrathin, continuous films that would facilitate the minimization of optical and electrical losses to develop qualified transparent Ag film electrodes in the state-of-the-art optoelectronic devices. This goal has yet to be attained, however, because conventional techniques to improve wetting of Ag based on heterogeneous metallic wetting layers are restricted by serious optical losses from wetting layers. Herein, we report on a simple and effective technique based on the partial oxidation of Ag nanoclusters in the early stages of Ag growth. This promotes the rapid evolution of the subsequently deposited pure Ag into a completely continuous layer on the ZnO substrate, as verified by experimental and numerical evidence. The improvement in the Ag wetting ability allows the development of a highly transparent, ultrathin (6 nm) Ag continuous film, exhibiting an average optical transmittance of 94% in the spectral range 400-800 nm and a sheet resistance of 12.5 Ω sq-1, which would be well-suited for application to an efficient front window electrode for flexible solar cell devices fabricated on polymer substrates.


Subject(s)
Silver/chemistry , Electric Conductivity , Electricity , Electrodes , Oxides
9.
ACS Appl Mater Interfaces ; 10(16): 14079-14086, 2018 Apr 25.
Article in English | MEDLINE | ID: mdl-29631398

ABSTRACT

Here, we study the plasmonic metal-enhanced fluorescence properties of blue-emitting graphene quantum dots (GQDs) and green-emitting graphene oxide quantum dots (GOQDs) using fluorescence lifetime imaging microscopy. Reactive ion sputtered silver (Ag) on zinc oxide (ZnO) thin films deposited on silicon (Si) wafers are used as the substrates. The morphology of the sputtered Ag gradually changes from nanoislands, via and elongated network and a continuous film with nanoholes, to a continuous film with increasing sputtering time. The fluorescence properties of GQD and GOQD on the Ag are modulated in terms of the intensities and lifetimes as the morphology of the Ag layers changes. Although both GQD and GOQD show similar fluorescence modulation on the Ag nanofilms, the fluorescence of GQD is enhanced, whereas that of GOQD is quenched due to the charge transfer process from GOQD to ZnO. Moreover, the GQD and GOQD exhibit different fluorescence lifetimes due to the effect of their electronic configurations. The theoretical calculation explains that the fluorescence amplification on the Ag nanofilms can largely be attributed to the enhanced absorption mechanism arising from accumulated optical fields around nanogaps and nanovoids in the Ag nanofilms.

10.
ACS Appl Mater Interfaces ; 9(44): 38695-38705, 2017 Nov 08.
Article in English | MEDLINE | ID: mdl-29039201

ABSTRACT

The development of highly efficient flexible transparent electrodes (FTEs) supported on polymer substrates is of great importance to the realization of portable and bendable photovoltaic devices. Highly conductive, low-cost Cu has attracted attention as a promising alternative for replacing expensive indium tin oxide (ITO) and Ag. However, highly efficient, Cu-based FTEs are currently unavailable because of the absence of an efficient means of attaining an atomically thin, completely continuous Cu film that simultaneously exhibits enhanced optical transmittance and electrical conductivity. Here, strong two-dimensional (2D) epitaxy of Cu on ZnO is reported by applying an atomically thin (around 1 nm) oxygen-doped Cu wetting layer. Analyses of transmission electron microscopy images and X-ray diffraction patterns, combined with first-principles density functional theory calculations, reveal that the reduction in the surface and interface free energies of the wetting layers with a trace amount (1-2 atom %) of oxygen are largely responsible for the two-dimensional epitaxial growth of the Cu on ZnO. The ultrathin 2D Cu layer, embedded between ZnO films, exhibits a highly desirable optical transmittance of over 85% in a wavelength range of 400-800 nm and a sheet resistance of 11 Ω sq-1. The validity of this innovative approach is verified with a Cu-based FTE that contributes to the light-to-electron conversion efficiency of a flexible organic solar cell that incorporates the transparent electrode (7.7%), which far surpasses that of a solar cell with conventional ITO (6.4%).

11.
Nat Commun ; 6: 8830, 2015 Nov 05.
Article in English | MEDLINE | ID: mdl-26538008

ABSTRACT

Advances in flexible optoelectronic devices have led to an increasing need for developing highly efficient, low-cost, flexible transparent conducting electrodes. Copper-based electrodes have been unattainable due to the relatively low optical transmission and poor oxidation resistance of copper. Here, we report the synthesis of a completely continuous, smooth copper ultra-thin film via limited copper oxidation with a trace amount of oxygen. The weakly oxidized copper thin film sandwiched between zinc oxide films exhibits good optoelectrical performance (an average transmittance of 83% over the visible spectral range of 400-800 nm and a sheet resistance of 9 Ω sq(-1)) and strong oxidation resistance. These values surpass those previously reported for copper-based electrodes; further, the record power conversion efficiency of 7.5% makes it clear that the use of an oxidized copper-based transparent electrode on a polymer substrate can provide an effective solution for the fabrication of flexible organic solar cells.

12.
Nano Lett ; 7(1): 39-44, 2007 Jan.
Article in English | MEDLINE | ID: mdl-17212437

ABSTRACT

GaAs nanowires were epitaxially grown on Si(001) and Si(111) substrates by using Au-catalyzed vapor-liquid-solid (VLS) growth in a solid source molecular beam epitaxy system. Scanning electron microscopy analysis revealed that almost all the GaAs nanowires were grown along <111> directions on both Si substrates for growth conditions investigated. The GaAs nanowires had a very uniform diameter along the growth direction. X-ray diffraction data and transmission electron microscopy analysis revealed that the GaAs<111> nanowires had a mixed crystal structure of the hexagonal wurtzite and the cubic zinc-blende. Current-voltage characteristics of junctions formed by the epitaxially grown GaAs nanowires and the Si substrate were investigated by using a current-sensing atomic force microscopy.


Subject(s)
Arsenicals/chemistry , Gallium/chemistry , Nanowires , Silicon/chemistry , Crystallography, X-Ray , Microscopy, Electron, Scanning
13.
J Biomed Mater Res B Appl Biomater ; 73(2): 285-90, 2005 May.
Article in English | MEDLINE | ID: mdl-15678499

ABSTRACT

The interaction between acidic fluoride solution and beta titanium alloy was investigated to explore the changes that occur in beta titanium alloy by fluoride-containing acetic acid solutions. For this, alloy crystal structure, tensile strength, and elements released from the alloy wires were determined using four solutions (0.05%/pH 6, 0.05%/pH 4, 0.2%/pH 6, and 0.2%/pH 4) for 1 or 3 days. The immersed wire did not form any identifiable new crystal structure compared with the as-received wire. The tensile strength of the immersed wires was significantly reduced compared to the as-received wires in the test solutions if the period of immersion increased from as-received to 3 days. The fractured area of the immersed wire was reduced compared to the as-received one. The dimple pattern at the inner part and a cup-cone morphology at the outer part of the fractured wires were similar in both as-received and immersed wires. After a 3-day immersion, the amount of the released Ti and Mo has much increased for higher NaF concentration and lower pH value. During the long-period orthodontic treatment, both patient and clinical doctor should carefully use the fluoride-containing products to minimize unexpected damage on orthodontic wires.


Subject(s)
Dental Alloys/chemistry , Fluorides/chemistry , Titanium/chemistry , Acetates , Bone Wires , Materials Testing , Molybdenum , Sodium Fluoride , Solutions , Surface Properties , Tensile Strength
SELECTION OF CITATIONS
SEARCH DETAIL
...