Biomechanical analysis of operative methods in the treatment of extra-articular fracture of the proximal tibia.

BACKGROUND: To determine relative fixation strengths of a single lateral locking plate, a double construct of a locking plate, and a tibial nail used in treatment of proximal tibial extra-articular fractures. METHODS: Three groups of composite tibial synthetic bones consisting of 5 specimens per group were included: lateral plating (LP) using a locking compression plate-proximal lateral tibia (LCP-PLT), double plating (DP) using a LCP-PLT and a locking compression plate-medial proximal tibia, and intramedullary nailing (IN) using an expert tibial nail. To simulate a comminuted fracture model, a gap osteotomy measuring 1 cm was created 8 cm below the knee joint. For each tibia, a minimal preload of 100 N was applied before loading to failure. A vertical load was applied at 25 mm/min until tibial failure. RESULTS: Under axial loading, fixation strength of DP (14,387.3 N; standard deviation [SD], 1,852.1) was 17.5% greater than that of LP (12,249.3 N; SD, 1,371.6), and 60% less than that of IN (22,879.6 N; SD, 1,578.8; p < 0.001, Kruskal-Wallis test). For ultimate displacement under axial loading, similar results were observed for LP (5.74 mm; SD, 1.01) and DP (4.45 mm; SD, 0.96), with a larger displacement for IN (5.84 mm; SD, 0.99). The median stiffness values were 2,308.7 N/mm (range, 2,147.5 to 2,521.4 N/mm; SD, 165.42) for the LP group, 4,128.2 N/mm (range, 3,028.1 to 4,831.0 N/mm; SD, 832.88) for the DP group, and 5,517.5 N/mm (range, 3,933.1 to 7,078.2 N/mm; SD, 1,296.19) for the IN group. CONCLUSIONS: During biomechanical testing of a simulated comminuted proximal tibial fracture model, the DP proved to be stronger than the LP in terms of ultimate strength. IN proved to be the strongest; however, for minimally invasive osteosynthesis, which may be technically difficult to perform using a nail, the performance of the DP construct may lend credence to the additional use of a medial locking plate.

Simple in situ decompression for idiopathic cubital tunnel syndrome using minimal skin incision.

Cubital tunnel syndrome is one of the most frequently occurring compression neuropathy in the upper limb next to carpal tunnel syndrome. Recent minimal invasive technique has prompted us to gain clinical experience with simple in situ decompression with minimal skin incision for idiopathic cubital tunnel syndrome. Sixty six consecutive patients with cubital tunnel syndrome were treated using minimal skin incision technique. The mean age of the patients was 49.7 (range: 15-77) years and average follow up period was 23.9 months (range: 12-60 months). The severity of ulnar neuropathy was classified according to the McGowan classification: there were 17 in grade I, 47 in grade II and 2 in grade III. A preoperative nerve conduction study was done by inching method, which revealed motor conduction delay around the medial epicondyle. All operations were carried out in a day surgery unit under local anesthetics. The postoperative outcome was evaluated by Messina classification. The mean duration of the operation was 12 minutes. The technique was highly satisfactorily esthetic for all. Over 80% of the patients were completely satisfied with the procedure taking into consideration their symptoms. Postoperative outcome measures and patient satisfactions (pain, return to normal activities and work, scar and pillar tenderness) were comparable with published series of anterior transposition. The overall satisfactory results were recorded 81% in the patients of McGowan stage I and II. There were 2 cases of hematoma as a postoperative complication. This procedure is comparably effective alternative which involves less surgical trauma, morbidity and rehabilitation time with good surgical outcomes especially in mild and moderate degrees. Minimal skin incision is a simple, safe and effective method to treat patients with idiopathic cubital tunnel syndrome.

Percutaneous plating for unstable tibial fractures.

Twenty-four unstable tibial fractures were stabilized with a narrow limited contact-dynamic compression plate inserted using a percutaneous plating technique under fluoroscopic guidance. The major indication for this technique was a tibial fracture for which intramedullary nailing would be difficult. There were 16 proximal or distal metaphyseal fractures and 5 segmental fractures in adults and 3 mid-shaft fractures in adolescents who still had an open physis. Of the 24 fractures, 22 healed without a second procedure; the two failures included one that required an early bone graft for severe comminution and another with a superficial infection that healed after early removal of the plate. There were no other infections. There were three cases of screw breakage, but they did not require a further procedure. At the final follow-up, one patient had healed with 5 degrees varus alignment and another with 10 degrees external rotation. All the patients had good knee or ankle function. We are confident that the percutaneous plating technique to treat unstable tibial fractures for which intramedullary nailing would be difficult will prove to be an alternative stabilization method, as it avoids the risk of infection or soft tissue compromise.