ABSTRACT
In this work, we introduce a bicomponent hole-transport layer, composed of inorganic NiOx and a donor-acceptor-donor (D-A-D)-structured organic small molecule, for p-i-n planar perovskite photovoltaic (PV) cells. The newly designed D-A-D organic hole-transporting material (HTM), (4',4â´-(1,3,4-oxadiazole-2,5-diyl)bis(N,N-bis(4-methoxyphenyl)-[1,1'-biphenyl]-4-amine)), is shown to be an efficient HTM without a dopant, and methoxy functional units, further introduced to the molecules, are confirmed to be beneficial to passivate the defects in the perovskite, which improves the crystallinity of perovskite and suppresses the nonradiative recombination in the devices, consequently enhancing the performances of PV cells (over 20% efficiency from p-i-n architecture). Furthermore, the decreased defect sites along with the UV-blocking property of the HTM in p-i-n architecture are advantageous in improving the stability of the PV devices.
ABSTRACT
In this study, we used a compositionally gradient anode functional layer (AFL) consisting of Ni-BaCe(0.5)Zr(0.35)Y(0.15)O(3-δ) (BCZY) with increasing BCZY contents toward the electrolyte-anode interface for high-performance protonic ceramic fuel cells. It is identified that conventional homogeneous AFLs fail to stably accommodate a thin film of BCZY electrolyte. In contrast, a dense 2 µm thick BCZY electrolyte was successfully deposited onto the proposed gradient AFL with improved adhesion. A fuel cell containing this thin electrolyte showed a promising maximum peak power density of 635 mW cm(-2) at 600 °C, with an open-circuit voltage of over 1 V. Impedance analysis confirmed that minimizing the electrolyte thickness is essential for achieving a high power output, suggesting that the anode structure is important in stably accommodating thin electrolytes.
ABSTRACT
This study was performed to investigate the influence of operational pH on dark H(2) fermentation of food waste by employing anaerobic batch reactors. The highest maximum H(2) yield was 1.63 mol H(2)/mol hexoseadded at operational pH 5.3, whereas the lowest maximum H(2) yield was 0.88 mol H(2)/mol hexoseadded at operational pH 7.0. With decreasing operational pH values, the n-butyrate concentration tended to increase and the acetate concentration tended to decrease. The highest hydrogen conversion efficiency of 11.3% was obtained at operational pH 5.3, which was higher than that (8.3%) reported by a previous study (Kim et al. (2011) 'Effect of initial pH independent of operational pH on hydrogen fermentation of food waste', Bioresource Technology 102 (18), 8646-8652). The new result indicates that the dark fermentation of food waste was stable and efficient in this study. Fluorescence in situ hybridization (FISH) analysis showed that Clostridium species Cluster I accounted for 84.7 and 13.3% of total bacteria at operational pH 5.3 and pH 7.0, respectively, after 48 h operation.
