Highly Efficient Flexible Perovskite Light-Emitting Diodes Using the Modified PEDOT:PSS Hole Transport Layer and Polymer-Silver Nanowire Composite Electrode.

Metal halide perovskites have been actively studied as promising materials in optoelectronic devices because of their superior optical and electrical properties and have also shown considerable potential for flexible devices because of their good mechanical properties. However, the large hole injection barrier and exciton quenching between the perovskite emitter and poly(3,4-ethylenedioxythiophene):poly-styrene sulfonate (PEDOT:PSS) can lead to the reduction in device efficiency. Here, a nonconductive fluorosurfactant, Zonyl FS-300 (Zonyl), is introduced into the PEDOT:PSS hole transport layer, which reduces the hole injection barrier and exciton quenching at the PEDOT:PSS/perovskite interface. Moreover, a flexible perovskite light-emitting diode with a polymer-silver nanowire composite electrode is demonstrated, showing a maximum current efficiency (CEmax) of 17.90 cd A-1, and this is maintained even after 1000 cycles of bending with a 2.5 mm bending radius.

Nanomechanical Approach for Flexibility of Organic-Inorganic Hybrid Perovskite Solar Cells.

The mechanical flexibility of perovskite solar cells as well as high power conversion efficiency is attracting increasing attention. In addition to existing empirical approaches, such as cyclic bending tests, in this study we report the tensile properties of the perovskite materials themselves. Measuring the tensile properties of free-standing perovskite materials is critical because (1) tensile properties represent the realistic mechanical properties of the film-type perovskite layer in the solar cells including the effects of various defects, and (2) deformation behavior of the perovskite layer at any deformed state of the solar cells can be analyzed using solid mechanics with the tensile properties as input. Critical bending radius of MAPbI3-based flexible solar cells is found to be between 0.5 and 1.0 mm by the decrease in power conversion efficiency during cyclic bending deformation. This finding agrees well with the critical bending radius of 0.66 mm determined based on the elastic deformation limit of 1.17% for MAPbI3 found by in situ tensile testing. Scanning electron microscopy observations and hole-nanoindentation tests suggest that the formation of coarse cracks in the perovskite layers is the primary cause of the decrease in power conversion efficiency observed in flexible perovskite solar cells.

Flexibility of Semitransparent Perovskite Light-Emitting Diodes Investigated by Tensile Properties of the Perovskite Layer.

Organic-inorganic hybrid perovskites have been investigated extensively for use in perovskite-based solar cells and light-emitting diodes (LEDs) because of their excellent electrical and optical properties. Although the flexibility of perovskite LEDs has been studied through empirical methods such as cyclic bending tests, the flexibility of the perovskite layer has not been investigated systemically. Here, flexible and semitransparent perovskite LEDs are fabricated: a PEDOT:PSS anode and Ag nanowire cathode allow for flexible and semitransparent devices, while the use of a conjugated polyelectrolyte as an interfacial layer reduces the electron injection barrier between the cathode and the electron transport layer (SPW-111), resulting in enhanced device efficiency. Cyclic bending tests performed on the electrodes and in situ hole-nanoindentation tests performed on the constituent materials suggest that mechanical failure occurs in the perovskite MAPbBr3 layer during cyclic bending, leading to a decrease in the luminance. Tensile properties of the MAPbBr3 layer explain the critical bending radius ( rb) of the perovskite LEDs on the order of 1 mm.

Highly efficient and stable inverted perovskite solar cell employing PEDOT:GO composite layer as a hole transport layer.

The beneficial use of a hole transport layer (HTL) as a substitution for poly(3,4-ethlyenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) is regarded as one of the most important approaches for improving the stability and efficiency of inverted perovskite solar cells. Here, we demonstrate highly efficient and stable inverted perovskite solar cells by applying a GO-doped PEDOT:PSS (PEDOT:GO) film as an HTL. The high performance of this solar cell stems from the excellent optical and electrical properties of the PEDOT:GO film, including a higher electrical conductivity, a higher work function related to the reduced contact barrier between the perovskite layer and the PEDOT:GO layer, enhanced crystallinity of the perovskite crystal, and suppressed leakage current. Moreover, the device with the PEDOT:GO layer showed excellent long-term stability in ambient air conditions. Thus, the enhancement in the efficiency and the excellent stability of inverted perovskite solar cells are promising for the eventual commercialization of perovskite optoelectronic devices.

Effect of the solvent used for fabrication of perovskite films by solvent dropping on performance of perovskite light-emitting diodes.

Organic-inorganic hybrid perovskites have emerged as a next-generation candidate for light-emitting device applications due to their excellent optical and electrical properties with narrow band emission compared to organic emitters. The morphological control of perovskite films with full surface coverage and few defect sites is essential for achieving highly efficient perovskite light-emitting diodes (PeLEDs). Here, we obtain a highly uniform perovskite film with a remarkably reduced number of defect sites in a perovskite crystal using chlorobenzene dropping. This effort leads to the enhanced performance of PeLEDs with a CH3NH3PbBr3 film using chlorobenzene dropping with a maximum luminance of 14 460 cd m-2 (at 3.8 V) and a maximum external quantum efficiency (EQE) of 0.71% (at 2.8 V). This research confirms that the role of the solvent in the solvent dropping method is to fabricate a dense and uniform perovskite film and to passivate the defect sites of the perovskite crystal films.

High-performance shape-engineerable thermoelectric painting.

Output power of thermoelectric generators depends on device engineering minimizing heat loss as well as inherent material properties. However, the device engineering has been largely neglected due to the limited flat or angular shape of devices. Considering that the surface of most heat sources where these planar devices are attached is curved, a considerable amount of heat loss is inevitable. To address this issue, here, we present the shape-engineerable thermoelectric painting, geometrically compatible to surfaces of any shape. We prepared Bi2Te3-based inorganic paints using the molecular Sb2Te3 chalcogenidometalate as a sintering aid for thermoelectric particles, with ZT values of 0.67 for n-type and 1.21 for p-type painted materials that compete the bulk values. Devices directly brush-painted onto curved surfaces produced the high output power of 4.0 mW cm-2. This approach paves the way to designing materials and devices that can be easily transferred to other applications.

Crystallographic texture in pulsed laser deposited hydroxyapatite bioceramic coatings.

The orientation texture of pulsed laser deposited hydroxyapatite coatings was studied by X-ray diffraction techniques. Increasing the laser energy density of the KrF excimer laser used in the deposition process from 5 to 7 J/cm(2) increases the tendency for the c-axes of the hydroxyapatite grains to be aligned perpendicular to the substrate. This preferred orientation is most pronounced when the incidence direction of the plume is normal to the substrate. Orientation texture of the hydroxyapatite grains in the coatings is associated with the highly directional and energetic nature of the ablation plume. Anisotropic stresses, transport of hydroxyl groups and dehydroxylation effects during deposition all seem to play important roles in the texture development.