Comparative Sensing and Judgment Control System for Temperature Maintenance for Optimal Treatment in Hyperthermic Intraperitoneal Chemotherapy Surgery.

For tumors wherein cancer cells remain in the tissue after colorectal cancer surgery, a hyperthermic anticancer agent is injected into the abdominal cavity to necrotize the remaining cancer cells with heat using a hyperthermic intraperitoneal chemotherapy system. However, during circulation, the processing temperature is out of range and the processing result is deteriorated. This paper proposes a look-up table (LUT) module design method that can stably maintain the processing temperature range during circulation via feedback. If the temperature decreases or increases, the LUT transmits a command signal to the heat exchanger to reduce or increase heat input, thereby maintaining the treatment temperature range. The command signal for increasing and decreasing heat input is Tp and Ta, respectively. The command signal for the treatment temperature range is Ts. If drug temperatures below 41 and above 43 °C are input to the LUT, it sends a Tp or Ta signal to the heat exchanger to increase or decrease the input heat, respectively. If the drug's temperature is 41-43 °C, the LUT generates a Ts signal and proceeds with the treatment. The proposed system can automatically control drug temperature using temperature feedback to ensure rapid, accurate, and safe treatment.

The Design of an Automatic Temperature Compensation System through Smart Heat Comparison/Judgment and Control for Stable Thermal Treatment in Hyperthermic Intraperitoneal Chemotherapy (HIPEC) Surgery.

After surgery for ovarian cancer or colorectal cancer, residual tumors are left around. A practical way to treat residual tumors is to destroy them with heat by injecting high-temperature drugs into the abdominal cavity. The injected medicinal substances are induced to flow out of the abdominal cavity; then, the spilled drug flows back into the abdominal cavity through feedback. During this process, the heat starts to decrease; thus, the treatment performance reduces. To overcome this problem, this study compares and assesses the temperature needed to maintain the heat for treatment and transmits a command signal to the heat exchanger through a look-up table (LUT). When the temperature decreases during the circulation of medications leaking out of the abdominal cavity, the LUT transmits a control signal (Tp) to the heat exchanger, which increases or vice versa. However, if the temperature (To) is within the treatment range, the LUT sends a Ts signal to the heat exchanger. This principle generates a pulse signal for the temperature difference (Tdif) in TC by comparing and determining the temperature (To) of the substance flowing out of the abdominal cavity with the reference temperature (Tref) through the temperature comparator (TC). At this time, if the signal is 41 °C or less, the LUT generates (heats) a Tp signal so that the temperature of the heat exchanger can be maintained in the range of 41 °C to 43 °C. If the Tdif is 44 °C or higher, the LUT generates (cools) the Ta signal and maintains the temperature of the heat exchanger at 41-43 °C. If the Tdif is maintained at 41-43 °C, the LUT generates a Tx signal to stop the system performance. At this time, the TC operation performance and Tdif generation process for comparing and determining the signal of To and Tref for drugs leaking out of the abdominal cavity is very important. It was observed that the faster the response signal, the lower the comparison and judgment error was; therefore, the response signal was confirmed to be 0.209 µs. The proposed method can guarantee rapid/accurate/safe treatment and automatically induce temperature adjustment; thus, it could be applied to the field of surgery.

The Impact of Postoperative Radiotherapy on Dietary Function of Head and Neck Cancer Patients after Pharyngoesophageal Reconstruction with Free Jejunal Flap.

This study investigated the impact of postoperative radiotherapy (PORT) on dietary function in patients who underwent pharyngoesophageal defect reconstruction using a free jejunal flap. A retrospective chart review of 36 patients who underwent circumferential pharyngoesophageal defect reconstruction using a free jejunal flap was performed. The European Organization for the Research and Treatment of Cancer head and neck cancer module questionnaire was used. Five items related to dietary function were selected and analyzed for changes in scores before and after PORT. Both the PORT and non-PORT groups showed improved dietary function before surgery, and no significant changes were noted at 3 and 12 months postoperatively. Repeated measures ANOVA showed that PORT had no significant impact on dietary function. In univariate analysis, no variable was a significant predictor of the score at 12 months, postoperatively. Previous radiotherapy and neck dissection had a close statistically significant relation. The multivariate analysis showed that neoadjuvant chemotherapy, previous radiotherapy, and neck dissection were significant predictors of the score at 12 months, postoperatively. PORT did not show a significant effect on the 12 months postoperative score. Free jejunal flap is an effective pharyngoesophageal defect reconstruction method that does not cause any dietary function disruption after PORT.

Miniaturized Bandpass Filter Using a Combination of T-Shaped Folded SIR Short Loaded Stubs.

The consumption of multimedia content is ubiquitous in modern society. This is made possible by wireless local area networks (W-LAN) or wire service systems. Bandpass filters (BPF) have become very popular as they solve certain data transmission limitations allowing users to obtain reliable access to their multimedia content. The BPFs with quarter-wavelength short stubs can achieve performance; however, these BPFs are bulky. In this article, we propose a compact BPF with a T-shaped stepped impedance resonator (SIR) transmission line and a folded SIR structure. The proposed BPF uses a T-shaped SIR connected to a J-inverter structure (transmission line); this T-shaped SIR structure is used to replace the λg/4 transmission line seen in conventional stub BPFs. In addition, a folded SIR is added to the short stubs seen in conventional stub BPFs. This approach allows us to significantly reduce the size of the BPF. The advantage of a BPF is its very small size, low insertion loss, and wide bandwidth. The overall size of the new BPF is 2.44 mm × 1.49 mm (0.068λg × 0.059λg). The proposed BPF can be mass produced using semiconductors due to its planar structure. This design has the potential to be widely used in various areas including military, medical, and industrial systems.

Exclusive tongue tip reconstruction of hemiglossectomy defects using the underrated lateral arm free flap with bilobed design.

BACKGROUND: Tongue reconstruction is challenging with the unique function and anatomy. Goals for reconstruction differ depending on the extent of reconstruction. Thin and pliable flaps are useful for tongue tip reconstruction, for appearance and mobility. This study reports lateral arm free flap (LAFF) as a safe and optimal option for hemi-tongue reconstruction, especially for tongue tip after hemiglossectomy. METHODS: Thirteen LAFFs were performed for hemi-tongue reconstruction after hemiglossectomy from 1995 to 2018. Of the 13 patients, seven were male and six were female, age varying from 24 to 64 years. RESULTS: All flaps healed uneventfully without complications. Donor sites were closed primarily. The recipient vessels for microvascular anastomosis were mainly superior thyroidal artery, external jugular vein. All patients returned to normal diet, with no complaints regarding reconstructed tongue and donor site. CONCLUSION: The LAFF is hairless, thin (especially with lateral epicondyle approach), and potentially sensate. They are advantageous features for tongue tip and hemi-tongue reconstruction. Donor site sacrifices the inessential posterior radial collateral artery, and the scar is hidden under short sleeve shirts. We believe that LAFF can be considered as the first choice flap for hemitongue reconstruction, over radial forearm free flaps.

UV-curable silicate phosphor planar films printed on glass substrate for white light-emitting diodes.

We suggest a simple way of forming a nonconventional remote phosphor layer for white light-emitting diodes. A printing technology using a paste consisting of yellow (Ba,Sr,Ca)(2)SiO(4):Eu(2+) silicate phosphor and ultraviolet (UV)-curable polymer is applied to form solid planar films on a common soda lime silicate glass substrate through UV radiation. Relative content of the phosphor was adjusted for the best dispersion of the phosphor particles in the polymer matrix with better emission and luminescence performance. As a result, the 70 wt. % phosphor-embedded film has a luminous efficacy of ∼70.1 lm/W at 200 mA.

Polyuria and polydipsia in a patient with non-small-cell lung cancer.

Tumor metastasis to the pituitary gland has been infrequently reported, and this is probably because only a small proportion of these patients are symptomatic. Most of the symptoms of this malady are related to diabetes insipidus. A 78-year-old man was diagnosed 2 years previously with stage IIIA adenocarcinoma of the lung and treated with sequential chemoradiation therapy and later with whole-brain radiation therapy because of newly developed brain metastasis; he was then admitted to our hospital with symptoms of polydipsia and polyuria. He was confirmed to have central diabetes insipidus that was caused by the pituitary metastasis from lung cancer. His symptoms resolved after treatment with desmopressin. Because of the rarity of this manifestation in lung cancer patients, we report on this case along with a brief review of the relevant literature.