Accounting for Cloud Nucleation Activation Mechanism of Secondary Organic Matter from α-Pinene Oxidation Using Experimentally Retrieved Water Solubility Distributions.

Activation of cloud droplets of aerosol particles from biogenic precursors plays a critical role in Earth's climate system. However, the molecular-level understanding of the cloud condensation nuclei (CCN) activation process for secondary organic matter (SOM) is still lacking. Here, we reduced the gap by segregating SOM from α-pinene based on water solubility. The chemical composition and CCN activity of the solubility-segregated fractions of SOM were measured. The results demonstrated for the first time by laboratory experiment that highly oxygenated compounds such as hydroperoxides and highly oxygenated organic molecules are important contributors for the CCN activity of α-pinene SOM. Meanwhile, relatively less water-soluble species were also abundant. Analysis based on the Köhler theory demonstrated that less water-soluble compounds in SOM remain undissolved during the cloud activation process, suggesting that the traditional single-parameter parameterization for CCN activation would not be sufficient for representing the process. In combination with the recent developments in SOM formation chemistry, the present study helps in understanding the interactions between the biosphere and climate.

Water Solubility Distribution of Organic Matter Accounts for the Discrepancy in Hygroscopicity among Sub- and Supersaturated Humidity Regimes.

Water uptake properties of organic matter (OM) are critical for aerosol direct and indirect effects. OM contains various chemical species that have a wide range of water solubility. However, the role of water solubility on water uptake by OM has poorly been investigated. We experimentally retrieved water solubility distributions of water-soluble OM (WSOM) from combustion of mosquito coil and tropical peat using the 1-octanol-water partitioning method. In addition, hygroscopic growth and cloud condensation nuclei (CCN) activity of solubility-segregated WSOM were measured. The dominant fraction of WSOM from mosquito coil smoldering was highly soluble (water solubility (S) > 10-2 g cm-3), while that from peat combustion contained ∼40% of less-soluble species (S < 10-3 g cm-3). The difference in water solubility distributions induced changes in the roles of less water-soluble fractions (S < 10-3 g cm-3) on CCN activity. Namely, the less water-soluble fraction from mosquito coil combustion fully dissolved at the point of critical supersaturation, while that for tropical peat smoldering was limited by water solubility. The present result suggests that water solubility distributions of OM, rather than its bulk chemical property, need to be quantified for understanding the water uptake process.

Characteristics of Doped TiO2 Nanoparticle Photocatalysts Prepared by the Rotten Egg White.

In this study, expired egg white was used as a template, and a sol-gel method was employed to prepare pure-phase TiO2 nano-powder and mixed-phase powders doped with NaF and NaI. The influences of different calcination temperatures, doping elements, and doping amounts during the preparation process on the photocatalytic performance and activity of the prepared TiO2 powders were studied. The results of the experiments showed that the F-doped TiO2 had the highest photocatalytic activity when the doping amount was 1.2%, as examined by EDS, where the sintering temperature was 500 °C. F-doped TiO2 nanoparticles were also synthesized by the sol-gel method using tetrabutyl titanate and NaF mixed with expired egg white protein as the precursor. The F-TiO2 photocatalyst was characterized using FE-SEM, HR-TEM, EDS, XPS, and UV-Vis, and the photocatalytic activity was evaluated by photodegradation of methylene blue under visible light. The results showed that doping with F reduced the energy band gap (3.04 eV) of TiO2, thereby increasing the photocatalytic activity in the visible-light region. The visible-light wavelength range and photocatalytic activity of the catalyst were also affected by the doping amount.

Production of succinic acid through the fermentation of Actinobacillus succinogenes on the hydrolysate of Napier grass.

BACKGROUND: Napier grass biomass can be hydrolyzed mainly containing glucose and xylose after alkaline pretreatment and enzymatic hydrolysis. This biomass can be fermented using Actinobacillus succinogenes to produce succinic acid. The yield of succinic acid was 0.58 g/g. Because metabolizing xylose could produce more acetic acid, this yield of succinic acid was lower than that achieved using glucose as the sole carbon source. RESULTS: The addition of glycerol as a fermentation substrate to Napier grass hydrolysate increased the reducing power of the hydrolysate, which not only increased the production of succinic acid but also reduced the formation of undesirable acetic acid in bacterial cells. At a hydrolysate:glycerol ratio of 10:1, the succinic acid yield reached 0.65 g/g. The succinic acid yield increased to 0.88 g/g when a 1:1 ratio of hydrolysate:glycerol was used. For the recovery of succinic acid from the fermentation broth, an outside-in module of an ultrafiltration membrane was used to remove bacterial cells. Air sparging at the feed side with a flow rate of 3 L/min increased the filtration rate. When the air flow rate was increased from 0 to 3 L/min, the average filtration rate increased from 25.0 to 45.7 mL/min, which corresponds to an increase of 82.8%. The clarified fermentation broth was then electrodialized to separate succinate from other contaminated ions. After electrodialysis, the acid products were concentrated through water removal, decolorized through treatment with activated carbon, and precipitated to obtain a purified product. CONCLUSIONS: The yield of succinic acid was increased by adding glycerol to the hydrolysate of Napier grass. The downstream processing consisting of ultrafiltration membrane separation and single-stage electrodialysis was effective for product separation and purification. An overall recovery yield of 74.7% ± 4.5% and a purity of 99.4% ± 0.1% were achieved for succinic acid.

Study of Lignin Extracted from Rubberwood Using Microwave Assisted Technology for Fuel Additive.

Lignin is the most abundant natural aromatic polymer, especially in plant biomass. Lignin-derived phenolic compounds can be processed into high-value liquid fuel. This study aimed to determine the yield of lignin by the microwave-assisted solvent extraction method and to characterize some essential properties of the extracted lignin. Rubberwood sawdust (Hevea brasiliensis) was extracted for lignin with an organic-based solvent, either ethanol or isopropanol, in a microwave oven operating at 2450 MHz. Two levels of power of microwave, 100 W and 200 W, were tested as well as five extraction times (5, 10, 15, 20, 25, and 30 min). The extracted lignin was characterized by Klason lignin, Fourier transform infrared spectroscopy (FT-IR), 2D HSQC NMR, Ultraviolet-visible spectrophotometry (UV-vis), and Bomb calorimeter. The results showed that the yield of extracted lignin increased with the extraction time and power of the microwave. In addition, the extraction yield with ethanol was higher than the yield with isopropanol. The highest yield was 6.26 wt.%, with ethanol, 30 min extraction time, and 200 W microwave power.

Covalent binding of glutathione on magnetic nanoparticles: Application for immobilizing small fragment ubiquitin-like-specific protease 1.

Magnetic nanoparticles bound with glutathione (GSH) are useful for diagnostics, enzyme immobilization, and affinity precipitation by using the strong and specific interaction of GSH with glutathione S-transferase (GST)-fused proteins. Our studies revealed that GSH-bound magnetic nanoparticles could be obtained using the covalent bond linkage of GSH and nanoparticles to promote the stability of bound GSH. To yield this conjugate, superparamagnetic iron oxide nanoparticles (SPIONs) were prepared and modified using tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES), which introduced amino groups that were then activated with maleic anhydride (MA) for covalent binding of GSH. After MA was used to activate the amino-grafted SPION for 24 h, the yield of GSH conjugation increased over 4 days from 37 % to 74 % of the original amine density on the surface as the incubation of GSH with MA-activated SPION. These GSH-bound magnetic nanoparticles, designated as SPION@silica-GSH with approximately 103 nmol GSH/mg particles, were ready for coupling with GST-fused protein through the GSH-GST affinity interaction. A GST-tagged small fragment of ubiquitin-like-specific protease 1 (sfULP1) was used as the model protein for immobilization on SPION@silica-GSH. ULP1 is a small ubiquitin-like modifier (SUMO) protease. Results indicated that this immobilized GST-sfULP1 could retain 87 % ± 5 % enzyme activity of free protease before immobilization and could catalyze the cleavage of the SUMO-fused peptide (SUMO-GLP-1) to obtain glucagon-like peptide-1, a peptide hormone for type 2 diabetes therapy.

A Significant Portion of Water-Soluble Organic Matter in Fresh Biomass Burning Particles Does Not Contribute to Hygroscopic Growth: An Application of Polarity Segregation by 1-Octanol-Water Partitioning Method.

The importance of water-soluble organic matter (WSOM) on the hygroscopic growth of particles is recognized, yet roles of different categories of WSOM are under debate. We segregated WSOM from Indonesian biomass burning particles by the 1-octanol-water partitioning method. The method is based on the 1-octanol-water partition coefficient (KOW), which correlates with water solubility. The segregated WSOM was analyzed using the humidified tandem differential mobility analyzer (HTDMA) and time-of-flight aerosol chemical speciation monitor (ToF-ACSM). Both the hygroscopicity parameter κ and the fractional contribution of m/z 44 (f44), which serves as a metric for degree of oxygenation, increased with polarity. This result experimentally evidenced that highly polar/water-soluble OM is highly hygroscopic/oxygenated. Positive matrix factorization (PMF) identified three factors from the ToF-ACSM data. Deconvolution of κ by PMF factors demonstrated that the less polar fractions, which occupy approximately 20-60% of WSOM dependent on the biomass type, almost do not contribute to water uptake under subsaturated conditions. This result highlights that categorization of WSOM will be needed to understand how hygroscopic growth of aerosol particles is regulated.

Polarity-Dependent Chemical Characteristics of Water-Soluble Organic Matter from Laboratory-Generated Biomass-Burning Revealed by 1-Octanol-Water Partitioning.

Polarity distribution of water-soluble organic matter (WSOM) is an important factor in determining the hygroscopic and cloud nucleation abilities of organic aerosol particles. We applied a novel framework to quantitatively classify WSOM based on the 1-octanol-water partition coefficient (KOW), which often serves as a proxy of polarity. In this study, WSOM was generated in a laboratory biomass-burning experiment by smoldering of Indonesian peat and vegetation samples. The fractionated WSOM was analyzed using a UV-visible spectrophotometer, spectrofluorometer, and time-of-flight aerosol chemical speciation monitor. Several deconvolution methods, including positive matrix factorization, parallel factor analysis, and least-squares analysis, were applied to the measured spectra, resulting in three classes of WSOM. The highly polar fraction of WSOM, which predominantly exists in the range of log KOW < 0, is highly oxygenated and exhibits similar optical properties as those of light-absorbing humic-like substances (HULIS, termed after the humic substances due to the similarity in chemical characteristics). WSOM in the least-polar fraction, which mainly distributes in log KOW > 1, mostly consists of hydrocarbon-like and high molecular weight species. In between the most- and least-polar fraction, WSOM in the marginally polar fraction likely contains aromatic compounds. The analyses have also suggested the existence of HULIS with different polarities. Comparison with previous studies indicates that only WSOM in the highly polar fraction (log KOW < 0) likely contributes to water uptake.

Model of acetic acid-affected growth and poly(3-hydroxybutyrate) production by Cupriavidus necator DSM 545.

Acetic acid, a potential growth inhibitor, commonly occurs in lignocellulosic hydrolysates. The growth of Cupriavidus necator DSM 545 and production of poly(3-hydroxybutyrate) (PHB) by this bacterium in a glucose-based medium supplemented with various initial concentrations of acetic acid are reported. The bacterium could use both glucose and acetic acid to grow and produce PHB, but acetic acid inhibited growth once its initial concentration exceeded 0.5 g/L. As acetic acid is an unavoidable contaminant in hydrolysates used as sugar sources in commercial fermentations, a mathematical model was developed to describe its impact on growth and the production of PHB. The model was shown to satisfactorily apply to growth and PHB production data obtained in media made with acetic-acid-containing hydrolysates of Napier grass and oil palm trunk as carbon substrates.

Green technological approach to synthesis hydrophobic stable crystalline calcite particles with one-pot synthesis for oil-water separation during oil spill cleanup.

The process of separating oil and water from oil/water mixtures is an attractive strategy to answer the menace caused by industrial oil spills and oily wastewater. In addition, water coproduced during hydrocarbon exploitation, which can be an economic burden and risk for freshwater resources, can become an important freshwater source after suitable water-oil separation. For oil-water separation purposes, considerable attention has been paid to the preparation of hydrophobic-oleophilic materials with modified surface roughness. However, due to issues of thermodynamic instability, costly and complex methods as well as lack of ecofriendly compounds, most of hydrophobic surface modified particles are of limited practical application. The study presents a facile procedure, to synthesize crystalline particles of calcite, which is the most stable polymorph of CaCO3 from industrial CaCO3 using oleic acid as an additive in a one-pot synthesis method. The XRD results show that the synthesized particles were a well-crystallized form of calcite. The FTIR results reflect the appearance of the alkyl groups from the oleic acid in synthesized particles which promotes the production of calcite with 'rice shape' (1.64 µm) (aggregated by spherical nanoparticle of 19.56 nm) morphology with concomitant changes in its surface wettability from hydrophilic to hydrophobic. The synthesized particles exhibited near to super hydrophobicity with ∼99% active ratio and a contact angle of 143.8°. The synthesized hydrophobic calcite particles had an oleophilic nature where waste diesel oil adsorption capacity of synthesized calcium carbonate (HCF) showed a very high (>99%) and fast (7 s) oil removal from oil-water mixture. The functional group of long alkyl chain including of CO bounds may play critical roles for adsorption of diesel oils. Moreover, the thermodynamically stable crystalline polymorph calcite (compared to vaterite) exhibited excellent recyclability. The isothermal study reflects the comparatively high value of correlation coefficient (R2 = 0.94) for the Langmuir isotherm compared to those of the Freundlich isotherm (R2 = 0.82) showed that the adsorption of diesel oil onto the hydrophobic CaCO3 adsorbent was much better described by the Langmuir isotherm. The kinetics study of second-order rate expression (R2 = 0.99) more fitted with the experimental data compare to first-order model (R2 = 0.92). The synthesized calcite exhibited a significant dual oleophilic and hydrophobic nature that can be applicable for oil adsorption/or removal purpose in oil contaminated areas in environment and/or industrial oily wastewater for green, simple, and inexpensive environmental cleanup.

Amylolytic Enzymes Acquired from L-Lactic Acid Producing Enterococcus faecium K-1 and Improvement of Direct Lactic Acid Production from Cassava Starch.

An amylolytic lactic acid bacterium isolate K-1 was isolated from the wastewater of a cassava starch manufacturing factory and identified as Entercoccus faecium based on 16S rRNA gene sequence analysis. An extracellular α-amylase was purified to homogeneity and the molecular weight of the purified enzyme was approximately 112 kDa with optimal pH value and temperature measured of 7.0 and 40 °C, respectively. It was stable at a pH range of 6.0-7.0, but was markedly sensitive to high temperatures and low pH conditions, even at a pH value of 5. Ba2+, Al3+, and Co2+ activated enzyme activity. This bacterium was capable of producing 99.2% high optically pure L-lactic acid of 4.3 and 8.2 g/L under uncontrolled and controlled pH at 6.5 conditions, respectively, in the MRS broth containing 10 g/L cassava starch as the sole carbon source when cultivated at 37 °C for 48 h. A control pH condition of 6.5 improved and stabilized the yield of L-lactic acid production directly from starch even at a high concentration of starch at up to 150 g/L. This paper is the first report describing the properties of purified α-amylase from E. faecium. Additionally, pullulanase and cyclodextrinase activities were also firstly recorded from E. faecium K-1.

Furfural and glucose can enhance conversion of xylose to xylitol by Candida magnoliae TISTR 5663.

Xylitol production from xylose by the yeast Candida magnoliae TISTR 5663 was enhanced by supplementing the fermentation medium with furfural (300mg/L) and glucose (3g/L with an initial mass ratio of glucose to xylose of 1:10) together under oxygen limiting conditions. In the presence of furfural and glucose, the final concentration of xylitol was unaffected relative to control cultures but the xylitol yield on xylose increased by about 5%. Supplementation of the culture medium with glucose alone at an initial concentration of 3g/L, stimulated the volumetric and specific rates of xylose consumption and the rate of xylitol production from xylose. In a culture medium containing 30g/L xylose, 300mg/L furfural and 3g/L glucose, the volumetric production rate of xylitol was 1.04g/L h and the specific production rate was 0.169g/g h. In the absence of furfural and glucose, the volumetric production rate of xylitol was ∼35% lower and the specific production rate was nearly 30% lower. In view of these results, xylose-containing lignocellulosic hydrolysates contaminated with furfural can be effectively used for producing xylitol by fermentation so long as the glucose-to-xylose mass ratio in the hydrolysate does not exceed 1:10 and the furfural concentration is ≤300mg/L.

Cell Signaling and Differential Protein Expression in Neuronal Differentiation of Bone Marrow Mesenchymal Stem Cells with Hypermethylated Salvador/Warts/Hippo (SWH) Pathway Genes.

Human mesenchymal stem cells (MSCs) modified by targeting DNA hypermethylation of genes in the Salvador/Warts/Hippo pathway were induced to differentiate into neuronal cells in vitro. The differentiated cells secreted a significant level of brain-derived neurotrophy factor (BDNF) and the expression of BDNF receptor tyrosine receptor kinase B (TrkB) correlated well with the secretion of BDNF. In the differentiating cells, CREB was active after the binding of growth factors to induce phosphorylation of ERK in the MAPK/ERK pathway. Downstream of phosphorylated CREB led to the functional maturation of differentiated cells and secretion of BDNF, which contributed to the sustained expression of pERK and pCREB. In summary, both PI3K/Akt and MAPK/ERK signaling pathways play important roles in the neuronal differentiation of MSCs. The main function of the PI3K/Akt pathway is to maintain cell survival during neural differentiation; whereas the role of the MAPK/ERK pathway is probably to promote the maturation of differentiated MSCs. Further, cellular levels of protein kinase C epsilon type (PKC-ε) and kinesin heavy chain (KIF5B) increased with time of induction, whereas the level of NME/NM23 nucleoside diphosphate kinase 1 (Nm23-H1) decreased during the time course of differentiation. The correlation between PKC-ε and TrkB suggested that there is cross-talk between PKC-ε and the PI3K/Akt signaling pathway.

Miscanthus as cellulosic biomass for bioethanol production.

The members of the genus Miscanthus are potential feedstocks for biofuels because of the promising high yields of biomass per unit of planted area. This review addresses species, cultivation, and lignocellulose composition of Miscanthus, as well as pretreatment and enzyme saccharification of Miscanthus biomass for ethanol fermentation. The average cellulose contents in dried biomass of Miscanthus floridulus, Miscanthus sinensis, Miscanthus sacchariflorus, and Miscanthus × giganteus (M × G) are 37.2, 37.6, 38.9, and 41.1% wt/wt, respectively. A number of pretreatment methods have been applied in order to enhance digestibility of Miscanthus biomass for enzymatic saccharification. Pretreatment of Miscanthus using liquid hot water or alkaline results in a significant release of glucose; while glucose yields can be 90% or higher if a pretreatment like AFEX that combines both chemical and physical processes is used. As ethanol is produced by yeast fermentation of the hydrolysate from enzymatic hydrolysis of residual solids (pulp) after pretreatment, theoretical ethanol yields are 0.211-0.233 g/g-raw biomass if only cellulose is taken into account. Simultaneous saccharification and fermentation of pretreated M × G and M. lutarioriparius results in experimental ethanol yields of 0.13 and 0.15 g/g-raw biomass, respectively. Co-production of value-added products can reduce the overall production cost of bioethanol.

Characterization of the recognition specificity of BH2, a monoclonal antibody prepared against the HLA-B27 heavy chain.

BH2, a monoclonal antibody prepared against the denatured human leukocytic antigen-B27 heavy chain (HLA-B27 HC), can immunoprecipitate the misfolded HLA-B27 HC complexed with Bip in the endoplasmic reticulum and recognize the homodimerized HLA-B27 HC that is often observed on the cell membrane of patients suffered from ankylosing spondylitis (AS). However, the recognition specificity of BH2 toward the other molecules of HLA-B type and toward the different types of HLA molecules remained uncharacterized. In this study, we carried out the HLA-typing by using the Luminex Technology to characterize the recognition specificity of BH2 and analyzed the binding domain of HLA-B27 HC by BH2. Our results indicated that BH2 preferably binds to molecules of HLA-B and -C rather than HLA-A and the binding site is located within the α2 domain of HLA-B27 HC.

Co-expression of a heat shock transcription factor to improve conformational quality of recombinant protein in Escherichia coli.

A co-expression system was established in Escherichia coli for enhancing the cellular expression of heat shock transcription factor, sigma 32 (σ(32)). A Shine-Dalgarno sequence and the rpoH gene of E. coli, which encodes σ(32), were cloned into a bacterial plasmid containing a gene fusion encoding a doubly tagged N-acetyl-d-neuraminic acid aldolase (GST-Neu5Ac aldolase-5R). After the IPTG induction, a substantially higher level of sigma 32 was observed up to 3 h in the co-expression cells, but an enhancement in the solubility of target protein was manifest only in the first hour. Nevertheless, the co-expression of sigma 32 led to higher level of Neu5Ac aldolase enzymatic activity in both the soluble and insoluble (inclusion body) fractions. The Neu5Ac aldolase activity of the supernatant from the lysate of cells co-expressing GST-Neu5Ac aldolase-5R and recombinant σ(32) was 3.4-fold higher at 3 h postinduction than that in cells overexpressing GST-Neu5Ac aldolase-5R in the absence of recombinantly expressed σ(32). The results of acrylamide quenching indicated that the conformational quality of the fusion protein was improved by the co-expression of recombinant σ(32). Thus, the increased level of intracellular σ(32) might have created favorable conditions for the proper folding of recombinant proteins through the cooperative effects of chaperones/heat shock proteins expressed by the E. coli host, which resulted in smaller inclusion bodies, improved conformational quality and a higher specific activity of the overexpressed GST-Neu5Ac aldolase-5R protein.

Immunocapture of CD133-positive cells from human cancer cell lines by using monodisperse magnetic poly(glycidyl methacrylate) microspheres containing amino groups.

Magnetic poly(glycidyl methacrylate)-based macroporous microspheres with an average particle size of 4.2µm were prepared using a modified multi-step swelling polymerization method and by introducing amino functionality on their surfaces. Antibody molecules were oxidized on their carbohydrate moieties and bound to the amino-containing magnetic microspheres via a site-directed procedure. CD133-positive cells could be effectively captured from human cancer cell lines (HepG2, HCT116, MCF7, and IMR-32) by using magnetic microspheres conjugated to an anti-human CD133 antibody. After further culture, the immunocaptured CD133-expressing cells from IMR-32 proliferated and gradually detached from the magnetic microspheres. Flow-cytometric analysis confirmed the enrichment of CD133-expressing cells by using the antibody-bound magnetic microspheres. Such microspheres suitable for immunocapture are very promising for cancer diagnosis because the CD133-expressing cells in cancer cell lines have been suggested to be cancer stem cells.

Cellular uptake of protein-bound magnetic nanoparticles in pulsed magnetic field.

A method for fast delivery of proteins conjugated to superparamagnetic iron oxide nanoparticles (SPION) into mammalian cells by applying a strong magnetic field in pulses was proposed. Firstly, SPION were prepared from an alkaline solution of divalent and trivalent iron ions and covalently bound with protein through the activation of N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide (EDC). After fluorescently labelling, the protein-nanoparticle conjugate was mixed with mammalian cell line and exposed to a pulsed magnetic field for short durations of few milliseconds. Results suggested that superparamagnetic nanoparticles were able to carry proteins into living cells immediately. Cellular internalization of the fluorescently labelled protein-nanoparticle conjugate was proved by the observation of cell fluorescence in a fluorescent microscopy, as well as cell analysis by a flow cytometer. We found that the cellular uptake was accomplished dominantly by the process of bombardment of magnetic nanoparticles.