Freestanding carbon nanofoam papers with tunable porosity as lithium-sulfur battery cathodes.

To reach energy density demands greater than 3 mA h cm-2 for practical applications, the electrode structure of lithium-sulfur batteries must undergo an architectural redesign. Freestanding carbon nanofoam papers derived from resorcinol-formaldehyde aerogels provide a three-dimensional conductive mesoporous network while facilitating electrolyte transport. Vapor-phase sulfur infiltration fully penetrates >100 µm thick electrodes and conformally coats the carbon aerogel surface providing areal capacities up to 4.1 mA h cm-2 at sulfur loadings of 6.4 mg cm-2. Electrode performance can be optimized for energy density or power density by tuning sulfur loading, pore size, and electrode thickness.

Structural and Morphological Analysis of the First Alloy/Dealloy of a Bulk Si-Li System at Elevated Temperature.

There have been tremendous improvements in the field of Si electrode materials, either by nanoscale or composite routes, and though silicon-containing carbon electrode materials have begun to penetrate the marketplace, the commercial capacities achieved by these cells still fall short of the promise of high capacity Si electrodes. Enabling a cheaper feedstock of Si in the bulk form would make this technology more accessible, though there are many challenges that must be overcome. Whereas other methods utilize nanomaterials and composites to overcome volume expansion and pulverization of a Si electrode, this study explores a thermal route to enable the use of carbon-free bulk Si. To accomplish this, a modified Swagelok cell has been constructed to accommodate high temperatures, corrosive molten salt electrolytes, and a molten lithium electrode to study lithiation of a bulk Si wafer at 250 °C. Scanning electron microscopy, X-ray diffraction, and microcomputed tomography were used to examine morphological and structural changes within the Si upon lithiation and delithiation. It was discovered that semiordered Li x Si phases were formed upon lithiation in molten LiTFSI electrolyte at 250 °C, and the higher temperature does not completely mitigate pulverization of the bulk Si electrode.

Recent Advances in Solar Thermal Electrochemical Process (STEP) for Carbon Neutral Products and High Value Nanocarbons.

Climate change represents one of the most important environmental issues of our time. Due to high levels of anthropogenic CO2 emissions, atmospheric CO2 has for the first time ever exceeded 415 ppm and has increased from 315 ppm in 1950. An annual increase in atmospheric CO2 of ∼2 ppm is equal to a net increase of ∼15.6 billion tons of CO2. The combustion of fossil fuels for electricity and transportation is still the main reason accounting for the CO2 accumulation. On the top of that, fossil fuels are widely used in our modern industry for the productions of indispensable social staples. For instance, the millennia old thermal reduction of iron ore by charcoal or baked coal (3C + 2Fe2O3 → 4Fe + 3CO2) continues as the main method for the production of iron. The artificial fertilizer ammonia boosts the global population and is mainly produced from the Haber-Bosch process, in which hydrogen is generated via steam reforming of methane (CH4 + 2H2O → 4H2 + CO2). Sequestration and diminution of CO2 require the development of a portfolio of technologies on (1) efficient and long-term harvesting of renewable energy, that is, solar, not only for electricity but also directly as the energy force in vital chemical processes, wherever possible, (2) carbon-neutral processes to replace current industrial processes that emit vast amounts of CO2, such as iron and ammonia production, and (3) new, low-cost technologies for CO2 capture and conversion with particular interests in the exploration of CO2 as the feedstock for fuels or other valuable chemicals and materials. To this end, we conducted some studies on the sustainable synthesis of ammonia and iron with net-zero CO2 emissions and large-scale CO2 capture and conversion into fuels and high value nanocarbon products via electrolysis in molten salt(s) with the introduction of the Solar Thermal Electrochemical Process (STEP). In STEP, solar UV-visible energy is focused on a photovoltaic device that generates the electricity to drive the electrolysis, while concurrently the solar thermal energy is focused on a second system to generate heat for the electrolysis cell. The utilization of the full spectrum of sunlight in STEP results in a higher solar energy efficiency than other solar conversion processes. STEP has been applied to conduct (1) CO2-free ammonia synthesis from nitrogen and water with the aid of nano-Fe2O3 in a molten hydroxide electrolyte, (2) CO2-free production of iron via electrochemical reduction of iron ore in molten carbonate, (3) CO2 capture and conversion into nanostructured carbon products as well as fuels in molten or mixed molten electrolytes, and (4) organic electrosynthesis of benzoic acid from benzene without overoxidizing into CO2. In this Account, we highlight some recent achievements in these topics and propose that using STEP is a highly efficient strategy for saving energy and, consequently, the environment. STEP is an ideal tool that can theoretically be applied to all endothermic reactions.

Carbon Nanotubes Produced from Ambient Carbon Dioxide for Environmentally Sustainable Lithium-Ion and Sodium-Ion Battery Anodes.

The cost and practicality of greenhouse gas removal processes, which are critical for environmental sustainability, pivot on high-value secondary applications derived from carbon capture and conversion techniques. Using the solar thermal electrochemical process (STEP), ambient CO2 captured in molten lithiated carbonates leads to the production of carbon nanofibers (CNFs) and carbon nanotubes (CNTs) at high yield through electrolysis using inexpensive steel electrodes. These low-cost CO2-derived CNTs and CNFs are demonstrated as high performance energy storage materials in both lithium-ion and sodium-ion batteries. Owing to synthetic control of sp(3) content in the synthesized nanostructures, optimized storage capacities are measured over 370 mAh g(-1) (lithium) and 130 mAh g(-1) (sodium) with no capacity fade under durability tests up to 200 and 600 cycles, respectively. This work demonstrates that ambient CO2, considered as an environmental pollutant, can be attributed economic value in grid-scale and portable energy storage systems with STEP scale-up practicality in the context of combined cycle natural gas electric power generation.