ABSTRACT
High accumulations of phytoplankton species that produce toxins are referred to as harmful algal blooms (HABs). HABs represent one of the most important sources of contamination in marine environments, as well as a serious threat to public health, fisheries, aquaculture-based industries, and tourism. Therefore, methods effectively controlling HABs with minimal impact on marine ecology are required. Marine dinoflagellates of the genera Dinophysis and Prorocentrum are representative producers of okadaic acid (OA) and dinophysistoxins responsible for the diarrhetic shellfish poisoning (DSP) which is a human intoxication caused by the consumption of shellfish that bioaccumulate those toxins. In this work we explore the use of natural clay for removing Prorocentrum lima. We evaluate the adsorption properties of clays in seawater containing the dinoflagellates. The experimental results confirmed the cell removal through the flocculation of algal and mineral particles leading to the formation of aggregates, which rapidly settle and further entrain cells during their descent. Moreover, the microscopy images of the samples enable one to observe the clays in aggregates of two or more cells where the mineral particles were bound to the outer membranes of the dinoflagellates. Therefore, this preliminary data offers promising results to use these clays for the mitigation of HABs.
Subject(s)
Aluminum Silicates/chemistry , Bentonite/chemistry , Dinoflagellida/isolation & purification , Kaolin/chemistry , Seawater/parasitology , Water Pollutants/isolation & purification , Adsorption , Clay , Flocculation , Harmful Algal Bloom , Particle Size , Surface PropertiesABSTRACT
The rheological behaviour of ethylene glycol-based nanofluids containing hexagonal scalenohedral-shaped α-Fe2O3 (hematite) nanoparticles at 303.15 K and particle weight concentrations up to 25% has been carried out using a cone-plate Physica MCR rheometer. The tests performed show that the studied nanofluids present non-Newtonian shear-thinning behaviour. In addition, the viscosity at a given shear rate is time dependent, i.e. the fluid is thixotropic. Finally, using strain sweep and frequency sweep tests, the storage modulus G', loss modulus Gâ³ and damping factor were determined as a function of the frequency showing viscoelastic behaviour for all samples.
ABSTRACT
The dispersion and stability of nanofluids obtained by dispersing Al2O3 nanoparticles in ethylene glycol have been analyzed at several concentrations up to 25% in mass fraction. The thermal conductivity and viscosity were experimentally determined at temperatures ranging from 283.15 K to 323.15 K using an apparatus based on the hot-wire method and a rotational viscometer, respectively. It has been found that both thermal conductivity and viscosity increase with the concentration of nanoparticles, whereas when the temperature increases the viscosity diminishes and the thermal conductivity rises. Measured enhancements on thermal conductivity (up to 19%) compare well with literature values when available. New viscosity experimental data yield values more than twice larger than the base fluid. The influence of particle size on viscosity has been also studied, finding large differences that must be taken into account for any practical application. These experimental results were compared with some theoretical models, as those of Maxwell-Hamilton and Crosser for thermal conductivity and Krieger and Dougherty for viscosity.
