Quasi-two-dimensional NaCl crystals encapsulated between graphene sheets and their decomposition under an electron beam.

Quasi-two-dimensional (2D) sodium chloride (NaCl) crystals of various lateral sizes between graphene sheets were manufactured via supersaturation from a saline solution. Aberration-corrected transmission electron microscopy was used for systematic in situ investigations of the crystals and their decomposition under an 80 kV electron beam. Counterintuitively, bigger clusters were found to disintegrate faster under electron irradiation, but in general no correlation between crystal sizes and electron doses at which the crystals decompose was found. As for the destruction process, an abrupt decomposition of the crystals was observed, which can be described by a logistic decay function. Density-functional theory molecular dynamics simulations provide insights into the destruction mechanism, and indicate that even without account for ionization and electron excitations, free-standing NaCl crystals must quickly disintegrate due to the ballistic displacement of atoms from their surface and edges during imaging. However, graphene sheets mitigate damage development by stopping the displaced atoms and enable the immediate recombination of defects at the surface of the crystal. At the same time, once a hole in graphene appears, the displaced atoms escape, giving rise to the quick destruction of the crystal. Our results provide quantitative data on the stability of encapsulated quasi 2D NaCl crystals under electron irradiation and allow the conclusion that only high-quality graphene is suitable for protecting ionic crystals from beam damage in electron microscopy studies.

A Study in Red: The Overlooked Role of Azo-Moieties in Polymeric Carbon Nitride Photocatalysts with Strongly Extended Optical Absorption.

The unique optical and photoredox properties of heptazine-based polymeric carbon nitride (PCN) materials make them promising semiconductors for driving various productive photocatalytic conversions. However, their typical absorption onset at ca. 430-450 nm is still far from optimum for efficient sunlight harvesting. Despite many reports of successful attempts to extend the light absorption range of PCNs, the determination of the structural features responsible for the red shift of the light absorption edge beyond 450 nm has often been obstructed by the highly disordered structure of PCNs and/or low content of the moieties responsible for changes in optical and electronic properties. In this work, we implement a high-temperature (900 °C) treatment procedure for turning the conventional melamine-derived yellow PCN into a red carbon nitride. This approach preserves the typical PCN structure but incorporates a new functionality that promotes visible light absorption. A detailed characterization of the prepared material reveals that partial heptazine fragmentation accompanied by de-ammonification leads to the formation of azo-groups in the red PCN, a chromophore moiety whose role in shifting the optical absorption edge of PCNs has been overlooked so far. These azo moieties can be activated under visible-light (470 nm) for H2 evolution even without any additional co-catalyst, but are also responsible for enhanced charge-trapping and radiative recombination, as shown by spectroscopic studies.

Formation of Defects in Two-Dimensional MoS2 in the Transmission Electron Microscope at Electron Energies below the Knock-on Threshold: The Role of Electronic Excitations.

Production of defects under electron irradiation in a transmission electron microscope (TEM) due to inelastic effects has been reported for various materials, but the microscopic mechanism of damage development in periodic solids through this channel is not fully understood. We employ non-adiabatic Ehrenfest, along with constrained density functional theory molecular dynamics, and simulate defect production in two-dimensional MoS2 under electron beam. We show that when excitations are present in the electronic system, formation of vacancies through ballistic energy transfer is possible at electron energies which are much lower than the knock-on threshold for the ground state. We further carry out TEM experiments on single layers of MoS2 at electron voltages in the range of 20-80 kV and demonstrate that indeed there is an additional channel for defect production. The mechanism involving a combination of the knock-on damage and electronic excitations we propose is relevant to other bulk and nanostructured semiconducting materials.

Visualization of unstained DNA nanostructures with advanced in-focus phase contrast TEM techniques.

Over the last few years, tremendous progress has been made in visualizing biologically important macromolecules using transmission electron microscopy (TEM) and understanding their structure-function relation. Yet, despite the importance of DNA in all forms of life, TEM visualization of individual DNA molecules in its native unlabeled form has remained extremely challenging. Here, we present high-contrast images of unstained single-layer DNA nanostructures that were obtained using advanced in-focus phase contrast TEM techniques. These include sub-Ångstrom low voltage electron microscopy (SALVE), the use of a volta-potential phase plate (VPP), and dark-field (DF) microscopy. We discuss the advantages and drawbacks of these techniques for broad applications in structural biology and materials science.

In Situ Crystallization of the Insoluble Anhydrite AII Phase in Graphene Pockets.

Single-distilled water encapsulated in graphene pockets has been studied by aberration-corrected high-resolution transmission electron microscopy and electron energy loss spectroscopy at an acceleration voltage of 80 kV. Inside the graphene pockets, crystallization and in situ crystal growth are reported and identified as the insoluble AII phase of CaSO4 (anhydrite) in a quasi-two-dimensional system. Its formation condition is discussed with respect to the possible temperature and van der Waals pressure between the graphene sheets.

Wafer-sized multifunctional polyimine-based two-dimensional conjugated polymers with high mechanical stiffness.

One of the key challenges in two-dimensional (2D) materials is to go beyond graphene, a prototype 2D polymer (2DP), and to synthesize its organic analogues with structural control at the atomic- or molecular-level. Here we show the successful preparation of porphyrin-containing monolayer and multilayer 2DPs through Schiff-base polycondensation reaction at an air-water and liquid-liquid interface, respectively. Both the monolayer and multilayer 2DPs have crystalline structures as indicated by selected area electron diffraction. The monolayer 2DP has a thickness of∼0.7 nm with a lateral size of 4-inch wafer, and it has a Young's modulus of 267±30 GPa. Notably, the monolayer 2DP functions as an active semiconducting layer in a thin film transistor, while the multilayer 2DP from cobalt-porphyrin monomer efficiently catalyses hydrogen generation from water. This work presents an advance in the synthesis of novel 2D materials for electronics and energy-related applications.

Chromatic Aberration Correction for Atomic Resolution TEM Imaging from 20 to 80 kV.

Atomic resolution in transmission electron microscopy of thin and light-atom materials requires a rigorous reduction of the beam energy to reduce knockon damage. However, at the same time, the chromatic aberration deteriorates the resolution of the TEM image dramatically. Within the framework of the SALVE project, we introduce a newly developed C_{c}/C_{s} corrector that is capable of correcting both the chromatic and the spherical aberration in the range of accelerating voltages from 20 to 80 kV. The corrector allows correcting axial aberrations up to fifth order as well as the dominating off-axial aberrations. Over the entire voltage range, optimum phase-contrast imaging conditions for weak signals from light atoms can be adjusted for an optical aperture of at least 55 mrad. The information transfer within this aperture is no longer limited by chromatic aberrations. We demonstrate the performance of the microscope using the examples of 30 kV phase-contrast TEM images of graphene and molybdenum disulfide, showing unprecedented contrast and resolution that matches image calculations.

Atomic scale microstructure and properties of Se-deficient two-dimensional MoSe2.

We study the atomic scale microstructure of nonstoichiometric two-dimensional (2D) transition metal dichalcogenide MoSe2-x by employing aberration-corrected high-resolution transmission electron microscopy. We show that a Se-deficit in single layers of MoSe2 grown by molecular beam epitaxy gives rise to a dense network of mirror-twin-boundaries (MTBs) decorating the 2D-grains. With the use of density functional theory calculations, we further demonstrate that MTBs are thermodynamically stable structures in Se-deficient sheets. These line defects host spatially localized states with energies close to the valence band minimum, thus giving rise to enhanced conductance along straight MTBs. However, electronic transport calculations show that the transmission of hole charge carriers across MTBs is strongly suppressed due to band bending effects. We further observe formation of MTBs during in situ removal of Se atoms by the electron beam of the microscope, thus confirming that MTBs appear due to Se-deficit, and not coalescence of individual grains during growth. At a very high local Se-deficit, the 2D sheet becomes unstable and transforms to a nanowire. Our results on Se-deficient MoSe2 suggest routes toward engineering the properties of 2D transition metal dichalcogenides by deviations from the stoichiometric composition.