A novel class of multivalent ionic conductors with the La3CuSiS7 structure type: results of stepwise ICSD screening.

The results of high-throughput screening of the inorganic crystal structure database for new promising Ca2+-, Mg2+-, Zn2+- and Al3+-ion conducting ternary and quaternary sulfides, selenides, and tellurides are presented (∼1500 compounds). A geometrical-topological approach based on the Voronoi partition was initially used and yielded 104 compounds, which were unknown as conductors with possible cation migration. All compounds were passed through the bond valence site energy analysis to determine the migration energy Em. Furthermore, we established the logarithmic dependencies of Em on the geometrical parameters of the migration pathways. As a result, 16 out of 104 structures were filtered out as promising conductors. Finally, density functional theory simulations yielded the 11 most prospective compounds with Em < 1.0 eV. Among them, we found a novel class of ionic conductors with the La3CuSiS7 structure, for which ab initio molecular dynamic calculations were performed, revealing diffusion coefficients of ∼10-7 cm2 s-1 and ionic conductivity of ∼10-2 S cm-1 at 300 K.

X-ray diffraction using focused-ion-beam-prepared single crystals.

High-quality single-crystal X-ray diffraction measurements are a prerequisite for obtaining precise and reliable structure data and electron densities. The single crystal should therefore fulfill several conditions, of which a regular defined shape is of particularly high importance for compounds consisting of heavy elements with high X-ray absorption coefficients. The absorption of X-rays passing through a 50 µm-thick LiNbO3 crystal can reduce the transmission of Mo Kα radiation by several tens of percent, which makes an absorption correction of the reflection intensities necessary. In order to reduce ambiguities concerning the shape of a crystal, used for the necessary absorption correction, a method for preparation of regularly shaped single crystals out of large samples is presented and evaluated. This method utilizes a focused ion beam to cut crystals with defined size and shape reproducibly and carefully without splintering. For evaluation, a single-crystal X-ray diffraction study using a laboratory diffractometer is presented, comparing differently prepared LiNbO3 crystals originating from the same macroscopic crystal plate. Results of the data reduction, structure refinement and electron density reconstruction indicate qualitatively similar values for all prepared crystals. Thus, the different preparation techniques have a smaller impact than expected. However, the atomic coordinates, electron densities and atomic charges are supposed to be more reliable since the focused-ion-beam-prepared crystal exhibits the smallest extinction influences. This preparation technique is especially recommended for susceptible samples, for cases where a minimal invasive preparation procedure is needed, and for the preparation of crystals from specific areas, complex material architectures and materials that cannot be prepared with common methods (breaking or grinding).

Pyroelectrically-driven chemical reactions described by a novel thermodynamic cycle.

Pyroelectrocatalysis is the conversion of thermal energy directly into chemical energy. On the background of renewable energies and the need for efficient industrial processes, the conversion of waste heat into hydrogen is of special relevance. Since the reported thermodynamic cycles for pyroelectric energy harvesting do not fit the conditions encountered in a reactive medium such as water appropriately, we describe a new thermodynamic charge-voltage-cycle characterised by fixed upper and lower potentials. These threshold potentials comprise the redox potential of the reaction of interest - here the hydrogen evolution reaction - as well as an overpotential mainly dictated by the temperature-induced bending of electronic bands in the pyroelectric semiconductor. Because polarisation changes below the threshold are useless for chemical reactions, material properties as well as process conditions have to be chosen accordingly. In particular the particle size along with the temperature difference are shown to determine the conversion efficiency.

The Aluminum-Ion Battery: A Sustainable and Seminal Concept?

The expansion of renewable energy and the growing number of electric vehicles and mobile devices are demanding improved and low-cost electrochemical energy storage. In order to meet the future needs for energy storage, novel material systems with high energy densities, readily available raw materials, and safety are required. Currently, lithium and lead mainly dominate the battery market, but apart from cobalt and phosphorous, lithium may show substantial supply challenges prospectively, as well. Therefore, the search for new chemistries will become increasingly important in the future, to diversify battery technologies. But which materials seem promising? Using a selection algorithm for the evaluation of suitable materials, the concept of a rechargeable, high-valent all-solid-state aluminum-ion battery appears promising, in which metallic aluminum is used as the negative electrode. On the one hand, this offers the advantage of a volumetric capacity four times higher (theoretically) compared to lithium analog. On the other hand, aluminum is the most abundant metal in the earth's crust. There is a mature industry and recycling infrastructure, making aluminum very cost efficient. This would make the aluminum-ion battery an important contribution to the energy transition process, which has already started globally. So far, it has not been possible to exploit this technological potential, as suitable positive electrodes and electrolyte materials are still lacking. The discovery of inorganic materials with high aluminum-ion mobility-usable as solid electrolytes or intercalation electrodes-is an innovative and required leap forward in the field of rechargeable high-valent ion batteries. In this review article, the constraints for a sustainable and seminal battery chemistry are described, and we present an assessment of the chemical elements in terms of negative electrodes, comprehensively motivate utilizing aluminum, categorize the aluminum battery field, critically review the existing positive electrodes and solid electrolytes, present a promising path for the accelerated development of novel materials and address problems of scientific communication in this field.

Sulfur- and Selenium-Containing Compounds Potentially Exhibiting Al Ion Conductivity.

We have created a set of crystalline model structures exhibiting straight lines of Al3+ connected to chalcogenides (O2- , S2- , and Se2- ) connected to metal cations of varying valence (Sr2+ , Y3+ , Zr4+ , Nb5+ , and Mo6+ ). They were relaxed with density functional theory computations and analysed by Bader partitioning. As Al3+ ions are supposed to strongly interact with their atomic environment, we studied the electron density topology induced by higher-valent cations in the extended chemical neighbourhood of Al. In fact, we found a general decrease of ionic charges and an increasing displacement of the chalcogenides towards higher-valent ions for the heavier chalcogens. Therefore, we comprehensively screened S- and Se-containing compounds for candidates theoretically exhibiting low migration barriers for Al3+ ions by using Voronoi-Dirichlet partitioning and bond valence site energy calculations. The basis for this search is the Inorganic Crystal Structure Database. Indeed, we could extract six promising candidates with low Al3+ migration barriers. which are even lower than the barriers for any other element inside of these materials. This will encourage efforts towards preparing suitable Al3+ conductors.

The anisotropy of oxygen vacancy migration in SrTiO3.

Oxygen migration in perovskites is well known to occur via vacancies along the TiO6 octahedron edges. Ionic conduction depends further on the orientation of the crystal in the electric field. To study the anisotropy in cubic SrTiO3 single crystals, temperature-dependent electroformation measurements ranging from 11 °C to 50 °C have been conducted for representative crystallographic directions within the crystal system. Electroformation of pure SrTiO3 follows an Arrhenius behavior, implying an ionic migration process of intrinsic oxygen defects. Activation energies E A for oxygen vacancy migration have been determined to 0.70 eV for [Formula: see text] and [Formula: see text] directions in contrast to 0.77 eV for [Formula: see text]. Mobility of oxygen vacancies is enhanced in [Formula: see text] compared to [Formula: see text] and [Formula: see text] by up to half an order of magnitude. A migration model based on atomistic migration paths and their multiplicities accounts for these experimental variations in mobility.

On the Way to New Possible Na-Ion Conductors: The Voronoi-Dirichlet Approach, Data Mining and Symmetry Considerations in Ternary Na Oxides.

With the constant growth of the lithium battery market and the introduction of electric vehicles and stationary energy storage solutions, the low abundance and high price of lithium will greatly impact its availability in the future. Thus, a diversification of electrochemical energy storage technologies based on other source materials is of great relevance. Sodium is energetically similar to lithium but cheaper and more abundant, which results in some already established stationary concepts, such as Na-S and ZEBRA cells. The most significant bottleneck for these technologies is to find effective solid ionic conductors. Thus, the goal of this work is to identify new ionic conductors for Na ions in ternary Na oxides. For this purpose, the Voronoi-Dirichlet approach has been applied to the Inorganic Crystal Structure Database and some new procedures are introduced to the algorithm implemented in the programme package ToposPro. The main new features are the use of data mined values, which are then used for the evaluation of void spaces, and a new method of channel size calculation. 52 compounds have been identified to be high-potential candidates for solid ionic conductors. The results were analysed from a crystallographic point of view in combination with phenomenological requirements for ionic conductors and intercalation hosts. Of the most promising candidates, previously reported compounds have also been successfully identified by using the employed algorithm, which shows the reliability of the method.