ABSTRACT
The potential to produce nanostructures with intricate shapes in large quantities holds promise for a range of applications in the fields of nanoelectronics and biomedicine. Here a method for fabricating Ni jellyfish-like nanowires (JFNWs) using bilayered nanoporous anodic alumina templates with through pores of varying diameters in each layer. To assess the capabilities of this method, samples are created with different voltages during the second step of anodization, resulting in distinct geometrical characteristics of the second layer of the template, and subsequently synthesize Ni JFNWs. By employing magnetometry and first-order reversal curve (FORC) method, the magnetic properties are examined and a significant alteration in their magnetic behavior, attributed to the differing shapes of the JFNWs and the magnetostatic interactions within the array, is observed. The study utilizes magnetic force microscopy to evaluate the stray magnetic fields generated by the individual JFNWs and unveils their unusual and asymmetric distribution. Through simulations based on the experimental data, the study analyzes the field- and current-induced domain wall movement in a single JFNW and their array. The findings reveal non-trivial micromagnetic configurations in these structures, including a remarkable 'corkscrew' state, and allow for an examination of the process of magnetization switching.
ABSTRACT
Reconstructive and regenerative bone surgery is based on the use of high-tech biocompatible implants needed to restore the functions of the musculoskeletal system of patients. Ti6Al4V is one of the most widely used titanium alloys for a variety of applications where low density and excellent corrosion resistance are required, including biomechanical applications (implants and prostheses). Calcium silicate or wollastonite (CaSiO3) and calcium hydroxyapatite (HAp) is a bioceramic material used in biomedicine due to its bioactive properties, which can potentially be used for bone repair. In this regard, the research investigates the possibility of using spark plasma sintering technology to obtain new CaSiO3-HAp biocomposite ceramics reinforced with a Ti6Al4V titanium alloy matrix obtained by additive manufacturing. The phase and elemental compositions, structure, and morphology of the initial CaSiO3-HAp powder and its ceramic metal biocomposite were studied by X-ray fluorescence, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller analysis methods. The spark plasma sintering technology was shown to be efficient for the consolidation of CaSiO3-HAp powder in volume with a Ti6Al4V reinforcing matrix to obtain a ceramic metal biocomposite of an integral form. Vickers microhardness values were determined for the alloy and bioceramics (~500 and 560 HV, respectively), as well as for their interface area (~640 HV). An assessment of the critical stress intensity factor KIc (crack resistance) was performed. The research result is new and represents a prospect for the creation of high-tech implant products for regenerative bone surgery.
ABSTRACT
Synthetic calcium silicates and phosphates are promising compounds for targeted drug delivery for the effective treatment of cancerous tumors, and for minimizing toxic effects on the patient's entire body. This work presents an original synthesis of a composite based on crystalline wollastonite CaSiO3 and combeite Na4Ca4(Si6O18), using a sea urchin Mesocentrotus nudus skeleton by microwave heating under hydrothermal conditions. The phase and elemental composition and structure of the obtained composite were studied by XRF, REM, BET, and EDS methods, depending on the microwave heating time of 30 or 60 min, respectively, and the influence of thermo-oxidative post-treatment of samples. The role of the sea urchin skeleton in the synthesis was shown. First, it provides a raw material base (source of Ca2+) for the formation of the calcium silicate composite. Second, it is a matrix for the formation of its porous inorganic framework. The sorption capacity of the composite, with respect to 5-fluorouracil, was estimated, the value of which was 12.3 mg/L. The resulting composite is a promising carrier for the targeted delivery of chemotherapeutic drugs. The mechanism of drug release from an inorganic natural matrix was also evaluated by fitting its release profile to various mathematical models.
ABSTRACT
MXenes are of great practical interest. While the physical properties of such a well-known MAX phase as Ti3AlC2 and the Ti3C2 MXene that is based on it have been widely studied, it is extremely important to study the properties of new four-component MAX-phases and the MXenes based on them. To do this, first, it is necessary to characterize the obtained materials. In this work, the Ti3-xNbxC2 MXene was characterized. Since the material is fairly new, there are no crystallographic data for such systems in the international databases. We proposed a method for the determination of the main unit cell parameters of the new Ti3-xNbxC2 MXene, which was based on a combination of the DFT method, TEM studies, and an X-ray diffraction analysis.
