Kinetic mechanism of molecular energy transfer and chemical reactions in low-temperature air-fuel plasmas.

This work describes the kinetic mechanism of coupled molecular energy transfer and chemical reactions in low-temperature air, H2-air and hydrocarbon-air plasmas sustained by nanosecond pulse discharges (single-pulse or repetitive pulse burst). The model incorporates electron impact processes, state-specific N(2) vibrational energy transfer, reactions of excited electronic species of N(2), O(2), N and O, and 'conventional' chemical reactions (Konnov mechanism). Effects of diffusion and conduction heat transfer, energy coupled to the cathode layer and gasdynamic compression/expansion are incorporated as quasi-zero-dimensional corrections. The model is exercised using a combination of freeware (Bolsig+) and commercial software (ChemKin-Pro). The model predictions are validated using time-resolved measurements of temperature and N(2) vibrational level populations in nanosecond pulse discharges in air in plane-to-plane and sphere-to-sphere geometry; temperature and OH number density after nanosecond pulse burst discharges in lean H(2)-air, CH(4)-air and C(2)H(4)-air mixtures; and temperature after the nanosecond pulse discharge burst during plasma-assisted ignition of lean H2-mixtures, showing good agreement with the data. The model predictions for OH number density in lean C(3)H(8)-air mixtures differ from the experimental results, over-predicting its absolute value and failing to predict transient OH rise and decay after the discharge burst. The agreement with the data for C(3)H(8)-air is improved considerably if a different conventional hydrocarbon chemistry reaction set (LLNL methane-n-butane flame mechanism) is used. The results of mechanism validation demonstrate its applicability for analysis of plasma chemical oxidation and ignition of low-temperature H(2)-air, CH(4)-air and C(2)H(4)-air mixtures using nanosecond pulse discharges. Kinetic modelling of low-temperature plasma excited propane-air mixtures demonstrates the need for development of a more accurate 'conventional' chemistry mechanism.

Fiber-coupled ultraviolet planar laser-induced fluorescence for combustion diagnostics.

Multimode silica step-index optical fibers are examined for use in planar laser-induced fluorescence (PLIF) for combustion diagnostics using ultraviolet (UV) laser sources. The multimode step-index fibers are characterized at UV wavelengths by examining their energy damage thresholds and solarization performance. The beam quality achievable with large clad step-index multimode fibers is also studied. Emphasis is placed on simultaneously achieving high output energy and beam quality (low output M(2)). The use of multimode fibers to deliver UV pulses at 283 nm for PLIF measurements of OH radicals in a Hencken burner is demonstrated. The fiber delivery capability of UV light will benefit combustion diagnostics in hostile environments, such as augmentor and combustor rigs.

Ultrahigh laser pulse energy and power generation at 10 kHz.

This Letter presents results from a new master-oscillator, power-amplifier pulse-burst laser system demonstrating ultrahigh pulse energies greater than 2.0 J/pulse at 1064 nm with interpulse separations of 100 µs (10 kHz) for burst durations of 100 pulses. Each pulse generates peak powers exceeding 130 MW and an average power of approximately 20 kW is generated over a 100-pulse-burst. Pulse energies decrease by less than 10% over a 100 sequential pulses, demonstrating negligible "droop" over long-duration pulse trains. Second-harmonic generation of 532 nm with conversion efficiency greater than 50% is demonstrated for 100-pulse-burst durations.

Diagnostic study of four-wave-mixing-based electric-field measurements in high-pressure nitrogen plasmas.

We present the results of a diagnostic study of the use of coherent four wave mixing for in situ measurement of an electric field in air or in nitrogen-containing plasmas. Static electric fields in air at a nominal pressure of 625 Torr and temperature of 300 K are detected using vibrational CARS of nitrogen. It is shown that the ratio of the infrared signal to the vibrational N(2) CARS signal is equal to approximately 10(-8) at 8.33 kV/cm, a factor of approximately 50 less than that predicted assuming equal third-order nonlinear susceptibilities. It is also shown that the spatial resolution of a typical collinear geometry measurement is approximately 1 cm. Finally, it is shown that achieving sensitivities of the order of 1 kV/cm requires that the coherent Raman pumping be performed in the highly saturated and Stark broadened regime.

MHz-rate nitric oxide planar laser-induced fluorescence imaging in a Mach 10 hypersonic wind tunnel.

Nitric oxide planar laser-induced fluorescence (NO PLIF) imaging at repetition rates as high as 1 MHz is demonstrated in the NASA Langley 31 in. Mach 10 hypersonic wind tunnel. Approximately 200 time-correlated image sequences of between 10 and 20 individual frames were obtained over eight days of wind tunnel testing spanning two entries in March and September of 2009. The image sequences presented were obtained from the boundary layer of a 20° flat plate model, in which transition was induced using a variety of different shaped protuberances, including a cylinder and a triangle. The high-speed image sequences captured a variety of laminar and transitional flow phenomena, ranging from mostly laminar flow, typically at a lower Reynolds number and/or in the near wall region of the model, to highly transitional flow in which the temporal evolution and progression of characteristic streak instabilities and/or corkscrew-shaped vortices could be clearly identified.

Ultrahigh-frame-rate OH fluorescence imaging in turbulent flames using a burst-mode optical parametric oscillator.

Burst-mode planar laser-induced fluorescence (PLIF) imaging of the OH radical is demonstrated in laminar and turbulent hydrogen-air diffusion flames with pulse repetition rates up to 50 kHz. Nearly 1 mJ/pulse at 313.526 nm is used to probe the OH P(2)(10) rotational transition in the (0,0) band of the A-X system. The UV radiation is generated by a high-speed-tunable, injection-seeded optical parametric oscillator pumped by a frequency-doubled megahertz-rate burst-mode Nd:YAG laser. Preliminary kilohertz-rate wavelength scanning of the temperature-broadened OH transition during PLIF imaging is also presented for the first time (to our knowledge), and possible strategies for spatiotemporally resolved planar OH spectroscopy are discussed.

Advances in generation of high-repetition-rate burst mode laser output.

It is demonstrated that the incorporation of variable pulse duration flashlamp power supplies into an Nd:YAG burst mode laser system results in very substantial increases in the realizable energy per pulse, the total pulse train length, and uniformity of the intensity envelope. As an example, trains of 20 pulses at burst frequencies of 50 and 20 kHz are demonstrated with individual pulse energy at 1064 nm of 220 and 400 mJ, respectively. Conversion efficiency to the second- (532 nm) and third- (355 nm) harmonic wavelengths of approximately 50% and 35-40%, respectively, is also achieved. Use of the third-harmonic output of the burst mode laser as a pump source for a simple, home built optical parametric oscillator (OPO) produces pulse trains of broadly wavelength tunable output. Sum-frequency mixing of OPO signal output at 622 nm with residual output from the 355 nm pump beam is shown to produce uniform bursts of tunable output at approximately 226 nm, with individual pulse energy of approximately 0.5 mJ. Time-correlated NO planar laser induced fluorescence (PLIF) image sequences are obtained in a Mach 3 wind tunnel at 500 kHz, representing, to our knowledge, the first demonstration of NO PLIF imaging at repetition rates exceeding tens of hertz.

Ultrahigh-frame-rate nitric oxide planar laser-induced fluorescence imaging.

We demonstrate the ability to generate ultrahigh frequency burst sequences of deep UV at 226 nm by mixing the optical parametric oscillator signal output at 622 nm with third harmonic at 355 nm from a pulse burst laser system. We obtained 226 nm burst sequences with uniform burst envelopes, and the average pulse energy is approximately 0.5 mJ. Nitric oxide planar laser-induced fluorescence image sequences at ultrahigh (100 kHz) frame rates have been obtained.

Narrow-linewidth megahertz-repetition-rate optical parametric oscillator for high-speed flow and combustion diagnostics.

We demonstrate the ability to generate ultra-high-frequency sequences of broadly wavelength-tunable, high-intensity laser pulses using a custom-built optical parametric oscillator pumped by the third-harmonic output of a "burst-mode" Nd:YAG laser. Burst sequences consisting of 6-10 pulses separated in time by 6-10 mus are obtained, with average total conversion efficiency from the 355 nm pump to the near-IR signal and idler wavelengths of approximately 33%. Typical individual pulse output energy for the signal and idler beams is in the range of 4-6 mJ, limited by the available pump energy. Line narrowing is demonstrated by means of injection seeding the idler wave using a low-power external-cavity diode laser at 827 nm. It is shown that seeding reduces the time-averaged linewidth of both the signal and idler outputs to approximately 300 MHz, which is near the 220 MHz Fourier transform limit. Line narrowing is achieved without recourse to active cavity stabilization.

Enhancement of spectral purity of injection-seeded titanium:sapphire laser by cavity locking and stimulated Brillouin scattering.

We report improvements to and better characterization of the spectral purity of a diode laser injection-seeded, cavity-locked titanium sapphire laser that serves as the source for a previously reported rubidium vapor spectrally filtered Thomson scattering apparatus at 780.24 nm. In a detailed set of measurements the spectral purity P of the laser, defined as the ratio ofthe narrowband component of the laser output to the total output, has been studied as a function of frequency mismatch between the seed laser frequency and the central frequency of the unseeded cavity. It is found that spectral purity exceeding 0.999 can be obtained for a seed-cavity mismatch as high as +/- 0.25 nm, corresponding to approximately 950 cavity longitudinal-mode spacings and as high as approximately 0.9999 for a cavity-seed mismatch in the range +/- 0.10 nm (380 mode spacings). It is also shown that the addition of an external-cavity stimulated Brillouin-scattering phase-conjugate mirror increases both the spectral purity, to a minimum of 0.99999, and the cavity-seed mismatch range, to +/- 0.25 nm, for which this maximum effective purity is obtained.