A magnetic plasma Fe3O4@Cu@Cu2O photoelectrochemical sensor for the detection of fumonisin B1.

Fumonisin B1 (FB1) is a mycotoxin, a water-soluble metabolite produced by Fusarium cepacia, which mainly contaminates grain and its products and is acutely toxic and potentially carcinogenic to certain domestic animals. In this work, plasma nanocomposites of Fe3O4@Cu@Cu2O with magnetic and optoelectronic properties were synthesized as a sensing platform. On one hand, the surface plasmon resonance (SPR) of metallic Cu accelerates the electron transfer rate. On the other hand, plasma-induced resonance energy transfer of metals and semiconductors can improve the utilization efficiency of light energy. A split photoelectrochemical (PEC) sensor based on Fe3O4@Cu@Cu2O was proposed for the detection of FB1. The sensor has a wide linear range of 1.0-10 000 pg mL-1 and a low detection limit of 0.28 pg mL-1 (LOD, S/N = 3), which can realize the specific detection of FB1 in real samples.

Phosphorus-rich CoP4@N-C nanoarrays for efficient nitrate-to-ammonia electroreduction.

The electrochemical nitrate reduction reaction (NO3-RR) is a novel green method for ammonia synthesis. However, the lack of sufficient catalysts has hindered the development of the NO3-RR. This research develops a transformation of porous CoP@N-C/CC into porous phosphorus-rich CoP4@N-C/CC through high-temperature calcination. Due to its unique phosphating-rich structure, CoP4@N-C/CC exhibits an excellent Faraday efficiency (FE: 92.3%) and NH3 yield (610.2 µmol h-1 cm-2). Such a catalyst with more P-P bonds can provide more active sites, effectively enhancing the adsorption and reaction processes of reactant molecules. In addition, the catalyst has good durability and catalytic stability, which provides a possibility for the future application of electrocatalytic ammonia production.

Peroxydisulfate activation by LaNiO3 nanoparticles with different morphologies for the degradation of organic pollutants.

A series of LaNiO3 perovskite nanoparticles with different morphologies, such as spheres, rods and cubes, were prepared through co-precipitation and hydrothermal methods, and used as the catalysts for peroxydisulfate (PDS) activation. The physical and chemical characterization of LaNiO3 perovskites was performed, including X-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen isotherm absorption (BET), electrochemical impedance spectroscopy (EIS), and X-ray photoelectron spectroscopy (XPS). The LaNiO3 with different shapes showed different activities in Acid Orange 7 (AO7) degradation. Sphere-like LaNiO3 exhibited the highest catalytic activity, which is probably due to the largest specific surface area, higher proportion of reductive Ni2+ and the higher electron transfer ability. The radical scavenging experiments and electron paramagnetic resonance (EPR) revealed the production of massive sulfate radicals (SO4•-) and hydroxyl radicals (•OH) during the oxidation. Finally, the possible mechanisms of PDS activation and AO7 degradation were proposed. The prepared LaNiO3 perovskites also showed excellent reusability and stability.

Persulfate activation by ferrocene-based metal-organic framework microspheres for efficient oxidation of orange acid 7.

Ferrocene-based metal-organic framework with different transition metals (M-Fc-MOFs, M = Fe, Mn, Co) was synthesized by a simple hydrothermal method and used as a heterogeneous catalyst for persulfate activation. The samples were characterized by X-ray diffraction, transmission electron microscopy, X-ray electron spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Meanwhile, the influences of factors such as catalyst dosage, persulfate concentration, and pH on the degradation of acid orange 7 (AO7) were studied in detail. The results showed that hollow cobalt-based ferrocenyl metal-organic framework microspheres (Co-Fc-MOFs) exhibited the best catalytic performance, which is closely related to the synergy of Fc/Fc+ and Co(II)/Co(III) cycles in persulfate activation. Free radical quenching studies indicated that both sulfate and hydroxyl appeared to contribute to the degradation of AO7.

Degradation of Acid Orange 7 in aqueous solution by dioxygen activation in a pyrite/H2O/O2 system.

Increasing attention has been paid to pyrite due to its ability to generate hydroxyl radicals in air-saturated solutions. In this study, the mineral pyrite was studied as a catalyst to activate molecular oxygen to degrade Acid Orange 7 (AO7) in aqueous solution. A complete set of control experiments were conducted to optimize the reaction conditions, including the dosage of pyrite, the AO7 concentration, as well as the initial pH value. The role of reactive oxygen species (ROS) generated by pyrite in the process was elucidated by free radical quenching reactions. Furthermore, the concentrations of Fe(II) and total Fe formed were also measured. The mechanism for the production of ROS in the pyrite/H2O/O2 system was that H2O2 was formed by hydrogen ion and superoxide anion (O2(·-)) which was produced by the reaction of pyrite activating O2 and then reacted with Fe(II) dissolved from pyrite to produce (·)OH through Fenton reaction. The findings suggest that pyrite/H2O/O2 system is potentially practical in pollution treatment. Moreover, the results provide a new insight into the understanding of the mechanism for degradation of organic pollutants by pyrite.

Degradation of Acid Orange 7 in aqueous solution by zero-valent aluminum under ultrasonic irradiation.

Degradation of azo dye Acid Orange 7 (AO7) by zero-valent aluminum (ZVAl) in combination with ultrasonic irradiation was investigated. The preliminary studies of optimal degradation methodology were conducted with sole ultrasonic, sole ZVAl/air system, ultrasonication + ZVAl/air system (US-ZVAl). In ZVAl/air system, the degradation of AO7 could almost not be observed within 30 min. The degradation of AO7 by ZVAl/air system was obviously enhanced under ultrasound irradiation, and the enhancement is mainly attributed to that the production of hydroxyl radicals in ultrasound-ZVAl process was much higher than that in sole ultrasonic or in sole ZVAl/air system. The variables considered for the effect of degradation were the power of ultrasound, the initial concentration of AO7, as well as the initial pH value and the dosage of zero-valent aluminum. The results showed that the decolorization rate increased with the increase of power density and the dosage of ZVAl, but decreased with the increase of initial pH value and initial concentration of AO7. More than 96% of AO7 removal was achieved within 30 min under optimum operational conditions (AO7: 20 mg/L, ZVAl: 2 g/L, pH: 2.5, ultrasound: 20 kHz, 300 W). This study demonstrates that ultrasound-ZVAl process can effectively decolorize the azo dye AO7 in wastewater.

Intensification of sonochemical degradation of ammonium perfluorooctanoate by persulfate oxidant.

Ammonium perfluorooctanoate (APFO) is an emerging environmental pollutant attracting significant attention due to its global distribution, high persistence, and bioaccumulation properties. The decomposition of APFO in aqueous solution with a combination of persulfate oxidant and ultrasonic irradiation was investigated. The effects of operating parameters, such as ultrasonic power, persulfate concentration, APFO concentration, and initial media pH on APFO degradation were discussed. In the absence of persulfate, 35.5% of initial APFO in 46.4 µmol/L solution under ultrasound irradiation, was decomposed rapidly after 120 min with the defluorination ratio reaching 6.73%. In contrast, when 10 mmol/L persulfate was used, 51.2% of initial APFO (46.4 µmol/L) was decomposed and the defluorination ratio reached 11.15% within 120 min reaction time. Enhancement of the decomposition of APFO can be explained by acceleration of substrate decarboxylation, induced by sulfate radical anions formed from the persulfate during ultrasonic irradiation. The SO4(-•)/APFO reactions at the bubble-water interface appear to be the primary pathway for the sonochemical degradation of the perfluorinated surfactants.

Heterogeneous activation of Oxone by Co(x)Fe(3-x)O4 nanocatalysts for degradation of rhodamine B.

The removal of Rhodamine B (RhB) by Co(x)Fe(3-x)O(4) magnetic nanoparticles activated Oxone has been performed in this study. A series of Co(x)Fe(3-x)O(4) nanoparticles was synthesized using a hydrothermal method. The synthetic Co(x)Fe(3-x)O(4) nanoparticles were characterized using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results showed that they were spinel structures and Co was introduced into their structures. The performances of Co(x)Fe(3-x)O(4) nanocatalysts on the activation of Oxone for removal of RhB were investigated and we found that the higher cobalt content in the catalyst, the better removal performance was resulted. A series experiments of reaction conditions were also performed, which confirmed that weak acidic, higher temperature, higher dosages of Co(x)Fe(3-x)O(4) nanocatalyst and Oxone and lower concentration of RhB were favored for the degradation of RhB. The pseudo-first order kinetics was observed to fit the Co(x)Fe(3-x)O(4)/Oxone process. Furthermore, the reaction mechanism was discussed and the scavenging effect was examined by using phenol and tert-butyl alcohol which indicated that sulfate radicals were the dominating reactive species responsible for the degradation process. Finally, the stability of Co(x)Fe(3-x)O(4) nanocatalyst was studied.

Degradation of amoxicillin in aqueous solution using sulphate radicals under ultrasound irradiation.

Degradation of the antibiotics amoxicillin in aqueous solution using sulphate radicals under ultrasound irradiation was investigated. The preliminary studies of optimal degradation methodology were conducted with only oxone (2KHSO(5) · KHSO(4) · K(2)SO(4)), cobalt activated oxone (oxone/Co(2+)), oxone+ultrasonication (oxone/US) and cobalt activated oxone+ultrasonication (oxone/Co(2+)/US). The chemical oxygen demand (COD) removal efficiency were in the order of oxone