Unawareness of deficits in ischemic injury: role of the cingulate cortex.

Reduced awareness of illness is a well-known phenomenon that has been studied in patients with vascular disease, but the precise nature of their executive dysfunction is an intriguing question that still has to be resolved. It would be particularly interesting to study patients with reduced awareness of disease possibly related to vascular lesions of the prefrontal cortex. Due to the clinical importance of the case, here we present a patient with a selective right anterior cingulate ischemic injury and impaired awareness of deficits. We suggest that the cingulo-frontal area dysfunction may represent one of the corresponding neurobiological substrates of his persistent unawareness, which has not yet been evaluated in the literature on patients with acquired brain injury (ABI).

The daily center care on impact of family burden.

Estimations indicate that a member of the family defined as caregiver nurses 80% of the patients affected by dementia in Italy at home. The term care giving refers to activities and experiences able to provide help and assistance to relatives or friends who are unable to live on their own. The aim of the study was to evaluate the impact of day-care center for patients affected by dementia and behavioral symptoms on burden perceived by caregiver. The introduction of a patient in a daily center results an effective support also for the family member who shows that the progressive awareness of the illness. Therefore, the taking care of all the problems linked to the role of caregiver is essential either to reduce the burden which lies on the welfare state and to realize a sort of "rehabilitation home" of the patient's cognitive behavioral and functional disorders. In this way, we could postpone as far as possible the institutionalization of the patient affected by dementia.

Ultrasonic techniques for assessing wall vibrations in stenosed arteries.

Arterial stenoses are often associated with audible bruits. Quantitative analysis of the bruit spectrum has been successfully used to predict the residual lumen diameter in carotid stenoses. Arterial wall vibrations occurring due to turbulent pressure fluctuations in the post-stenotic jet are known to be the source of the bruits. We present novel signal processing techniques that enable the detailed noninvasive assessment of these vibrations in real time using color-Doppler and pulsed-wave Doppler ultrasound. A color-Doppler-based two-dimensional vibration imaging technique can be used to locate the source of the bruits relative to the underlying anatomy. Subsequently, a pulsed-wave Doppler-based technique can be used to analyze the bruit spectrum quantitatively. Experiments in ex vivo arteries indicate that these techniques can predict the location of the bruit as well as its spectral content. Case studies on human subjects with stenosed vein grafts are presented and the clinical applicability of this technique is discussed.

Quantification of gastric emptying and duodenogastric reflux stroke volumes using three-dimensional guided digital color Doppler imaging.

OBJECTIVE: To develop a non-invasive method for evaluating gastric emptying and duodenogastric reflux stroke volumes using three-dimensional (3D) guided digital color Doppler imaging. METHODS: The technique involved color Doppler digital images of transpyloric flow in which the 3D position and orientation of the images were known by using a magnetic location system. RESULTS: In vitro, the system was found to slightly underestimate the reference flow (by average 8.8%). In vivo (five volunteers), stroke volume of gastric emptying episodes lasted on average only 0.69 s with a volume on average of 4.3 ml (range 1.1-7.4 ml), and duodenogastric reflux episodes on average 1.4 s with a volume of 8.3 ml (range 1.3-14.1 ml). CONCLUSION: With the appropriate instrument settings, orientation determined color Doppler can be used for stroke volume quantification of gastric emptying and duodenogastric reflux episodes.

Measurement of abdominal aortic aneurysms with three-dimensional ultrasound imaging: preliminary report.

OBJECTIVE: Accurate measurements of abdominal aortic aneurysms (AAAs) are required for surgical planning and monitoring over time. We have examined the feasibility of using a three-dimensional (3-D) ultrasound imaging system to derive quantitative measurements of interest from AAAs. METHODS: A normal aorta, a small AAA, and an AAA repaired with an endovascular stent graft were scanned with a 3-D ultrasound imaging system. For each case, a 3-D surface reconstruction was generated from manual outlines of a sequence of two-dimensional ultrasound images, registered in 3-D space with a magnetic tracking system. The surfaces were resampled in planes perpendicular to the vessel center axis to calculate cross-sectional area and maximum diameter as a function of distance along the length of the aorta. RESULTS: Cross-sectional area and maximum diameter were plotted along the length of the aneurysmal aortas from the renal arteries to the aortic bifurcation. The overall maximum diameter was found for both aneurysms. For the small AAA, the distances of the aneurysm from the renal arteries and the bifurcation were measured. For the repaired AAA, the location of the stent graft relative to the renal arteries was measured. CONCLUSIONS: 3-D surface reconstructions from ultrasound images show promise for quantitatively characterizing the geometry of AAAs both before surgery and after endovascular repair.

Serial measurement of cross-sectional area in peripheral vein grafts using three-dimensional ultrasound.

Frequent surveillance of bypass grafts placed in the lower limbs can provide early detection of stenoses. A three-dimensional (3-D) ultrasound (US) imaging system has been used to produce serial surface reconstructions of regions of interest in vein grafts in the lower extremities. Using anatomical reference points, data sets from serial studies are registered in a common 3-D coordinate system. Cross-sectional area measurements are extracted from the surface reconstructions in planes normal to the vessel center axis. These measurements are compared at matched sites over time to track changes in the vessel configuration. The quantitative measurements are paired with surface displays of the vessels for a complete depiction of the changing geometry. Example studies from three patients are shown, for time periods up to 38 weeks. The cross-sectional area measurements highlight regions of remodeling and developing stenoses within the grafts.

Three-dimensional ultrasound imaging of the rotator cuff: spatial compounding and tendon thickness measurement.

Three-dimensional (3-D) volume reconstructions of the shoulder rotator cuff were generated from freehand ultrasound (US) scans acquired with a magnetic tracking system. Image stacks acquired with lateral overlap from multiple acoustic windows were spatially compounded to provide an extended representation of the rotator cuff tendons. A semiautomated technique was developed for measuring rotator cuff thickness from the 3-D compound volumes. Scans of phantoms and volunteer subjects were used to evaluate the accuracy and repeatability of the thickness measurements. For an in vitro phantom with known thickness, the mean difference between the true value and the automatic measurements was 0.05 +/- 0.28 mm. Thickness measurements made manually from 2-D images and automatically from 3-D volumes were different by 0.03 +/- 0.44 mm in vitro and -0.06 +/- 0.36 in vivo. Repeated thickness measurements in vivo differed by 0.06 +/- 0.36 mm. The 3-D measurement technique offers a promising method for evaluating rotator cuff tendons.

Three-dimensional spatial compounding of ultrasound scans with weighting by incidence angle.

A three-dimensional (3D) ultrasound imaging system has been used to study spatial compounding of images acquired with different scanhead positions and orientations. A compounding algorithm has been developed that assigns regional weights depending on the local incidence angle of the ultrasound beam. Compound scans were performed of bones in vitro and the shoulder rotator cuff in volunteer subjects. Border measurements (peak value and width) were compiled as a function of ultrasound beam incidence angle and compared for single views and for maximum, mean and weighted mean compounding techniques. The weighted mean produces less variability than that of the maximum and mean for both intensity and border width. The weighted method also demonstrates less blurring of borders than the maximum and mean methods. Surfaces derived from the weighted reconstructions exhibited fewer gaps and fewer spurious connections between surfaces, which could be of particular importance for automated image analysis.

Image processing techniques for quantitative analysis of skin structures.

Computer-based image processing and analysis techniques were developed for quantitative analysis of skin structures in color histological sections. Performance was compared with traditional non-image processing counting methods. Skin sections were stained with Masson's trichrome, hematoxylin and eosin, picrosirius red, or one of several elastin stains. The image processing software identified the top of the cellular epidermis and the dermal-epidermal junction and then calculated the volume of the cellular layer of the epidermis, epidermal thickness, and the ratio of the dermal-epidermal junction surface area to the in-plane surface area. It also identified cells and collagen and calculated cellular densities and collagen densities in the papillary and reticular layers of the dermis. Attempts to computationally process elastin-stained sections to determine elastin density were unsuccessful. The described techniques were used in a preliminary study to compare mechanically stressed skin with control skin. Results showed significant differences in cellular density in the papillary dermis and collagen density in the reticular dermis for skin subjected to combined shear/compression or tension compared with an unstressed control. Measurements made with the computer technique and traditional technique showed comparable results; the mean difference in measurements for epidermal features was 5.33% while for dermal features it was 2.76%. Significance testing between control and experimental groups showed similar results, though for three of the 28 comparisons the computer method identified a significant difference while the traditional method did not. The computer method took longer to conduct than the traditional method, though with recent advances in computer hardware this time difference would be eliminated.

Left ventricular shape analysis from three-dimensional echocardiograms.

The objective of this study was to develop and validate a three-dimensional technique of left ventricular shape analysis. Geometric phantoms and left ventricles of excised calf hearts, normal human subjects, and one subject each with aortic stenosis and dilated cardiomyopathy were reconstructed from three-dimensional echocardiograms. The fit between the reconstructions and true surfaces of the geometric phantoms and excised ventricles was determined. To evaluate in vivo left ventricular shape, a center axis was constructed from the centroid of the mitral annulus to the furthest endocardial point. Regional shape was evaluated as the relative distances of 16 separate myocardial segments from the center axis compared with a population-derived mean value. Global shape was evaluated as the average standard deviation from the normal value over the 16 segments. The system precisely reproduced the shapes of the phantoms and excised left ventricles (root-mean-square error between true and reconstructed surface 1.0 0.2 mm and 1.2 0.8 mm, respectively). The in vivo shape analysis differentiated the pathological from normal left ventricles.

System for quantitative three-dimensional echocardiography of the left ventricle based on a magnetic-field position and orientation sensing system.

Accurate measurement of left-ventricular (LV) volume and function are important to monitor disease progression and assess prognosis in patients with heart disease. Existing methods of three-dimensional (3-D) imaging of the heart using ultrasound have shown the potential of this modality, but each suffers from inherent restrictions which limit its applicability to the full range of clinical situations. We have developed a technique for image acquisition using a magnetic-field system to track the 3-D echocardiographic imaging planes and 3-D image analysis software including the piecewise smooth subdivision method for surface reconstruction. The technique offers several advantages over existing methods of 3-D echocardiography. The results of validation using in vitro LV's show that the technique allows accurate measurement of LV volume and anatomically accurate 3-D reconstruction of LV shape and is, therefore, suitable for analysis of regional as well as global function.

Estimation of the human liver volume and configuration using three-dimensional ultrasonography: effect of a high-caloric liquid meal.

The aim of this study was to investigate whether or not a magnetic position sensing system for free-hand acquisition of 3-D ultrasound images could be used to estimate liver volumes, and to study the effect of a high-caloric meal on these volumes in healthy subjects. In vitro accuracy was evaluated by scanning porcine and rabbit livers. Ten healthy subjects were examined fasting and 30 min after ingesting a high-caloric liquid meal. Portal and hepatic vein blood flow were measured by 2-D duplex sonography. The 3-D system yielded a strong correlation (r = 0.99) between true and estimated volumes in vitro. No significant increase in liver volume in response to the meal was seen. However, portal and hepatic vein flow volume increased significantly. Experience in human subjects suggests that a complete 3-D study of liver volumes can be obtained from multiple acoustic windows. In healthy subjects, no significant increase in liver volume was seen in response to ingestion of a high-caloric liquid meal.

Quantitative three-dimensional echocardiography by rapid imaging from multiple transthoracic windows: in vitro validation and initial in vivo studies.

Three-dimensional echocardiography has demonstrated superiority over two-dimensional techniques in the determination of left ventricular mass and volumes. We describe a technique based on a magnetic tracking system which provides rapid three-dimensional image acquisition from multiple acoustic windows. Interactive three-dimensional border tracking and reconstruction with a piecewise smooth subdivision model accurately reproduced phantom volume (calculated volume = 1.00 true volume - 0.6 ml, r = 1.000, standard error of the estimate = 1.3 ml), in vitro heart volume (calculated volume = 1.02 true volume - 1.3 ml, r = 1.000, standard error of the estimate = 0.4 ml), in vitro heart mass (calculated mass = 0.98 true mass + 1.4 gm, r = 0.998, standard error of the estimate = 2.5 gm), and in vivo stroke volume (calculated stroke volume = 1.18 Doppler stroke volume - 17.9 ml, r = 0.990, standard error of the estimate = 2.8 ml). The three-dimensional in vivo data sets, which include views from three acoustic windows, were acquired in less than 90 seconds. We conclude that this method of three-dimensional echocardiographic data acquisition and analysis overcomes limitations inherent in currently available systems.

Intragastric distribution and gastric emptying assessed by three-dimensional ultrasonography.

BACKGROUND & AIMS: Three-dimensional (3D) ultrasound imaging of the total stomach volume has not yet been achieved. The aim of this study was to investigate whether a magnetic position sensor system for acquisition of 3D ultrasonograms could be used to determine gastric emptying rates and intragastric distribution. METHODS: A system for position and orientation measurement was interfaced to an ultrasound scanner. In vitro accuracy was evaluated by scanning a porcine stomach. Fourteen volunteers, with a median age of 35 years, were scanned fasting and postcibally by two-dimensional (2D) and 3D ultrasound after ingesting a 500-mL soup meal. RESULTS: This 3D system yielded a strong correlation (r = 0.997) between true and estimated volumes in vitro. The limits of agreement were -9.1:70.1 mL in the volume range 1200-1900 mL. The intersubject variability of the total gastric volumes ranged from 12.5% to 46.0%, less than for antral area variability. The average half-emptying time was 22.1 +/- 3.8 minutes. Intragastric distribution of the meal, expressed as proximal distal volume, varied on average from 3.6 +/- 2.1 (5 minutes postpradially) to 2.7 +/- 1.9 (30 minutes postprandially). CONCLUSIONS: This 3D ultrasound system using magnetic scanhead tracking showed excellent in vitro accuracy, calculated gastric emptying rates more precisely than by 2D ultrasound, and enabled estimation of intragastric distribution of a soup meal.

Performance of a miniature magnetic position sensor for three-dimensional ultrasound imaging.

A miniature magnetic position sensor used for three-dimensional ultrasound imaging was tested for precision and accuracy in vitro. The sensor alone was able to locate points with root-mean-square (rms) uncertainty of 1.7 mm and accuracy of 0.05 +/- 0.62 mm over its specified operating range of 50 cm. With an ultrasound imaging system, a point was located from arbitrary viewing windows with 2.4-mm rms uncertainty and 0.06 +/- 0.68 mm accuracy. If viewing windows were limited to those representative of a typical ultrasound examination, the system could achieve rms uncertainty in point location of < 1 mm. Performance was not affected by operation of the imaging system when the sensor was mounted on an ultrasound scanhead. Sensitivity to metals in the operating environment was also measured.

How positionally stable is a transesophageal echocardiographic probe? Implications for three-dimensional reconstruction.

Three-dimensional (3D) reconstruction from a single esophageal scanning position requires a stable relationship between the probe and the heart. The purpose of this study was to examine the movement of a transesophageal echocardiographic probe during 3D image acquisition. A new dual-axis multiplane probe was used that includes a miniature (6 x 6 x 9 mm) magnetic sensor in the tip. The sensor identifies the probe's 3D position and 3D orientation in space with respect to the location of a magnetic field generator placed beneath the subject. In vivo 3D scanning was performed in five anesthetized, ventilated dogs, with positional determinations acquired every 66 msec. Probe movement was estimated by computing the deviations of each x, y, and z position and orientation determination, compared with the average values during each 3D scan or cardiac cycle. Ten 3D scans were analyzed, involving 263 cardiac cycles and 2328 determinations. The range and SD of the translational movement of the transducer were 2.3 and 0.8 mm, 1.7 and 0.5 mm, and 2.4 and 0.7 mm in x, y, and z directions, respectively, during 3D scanning. Translational movement was more dominant than was rotational movement. Misregistration of three-dimensional reconstructions may be due to subtle probe movement. The ability to monitor probe movement may be helpful in optimizing 3D data sets.

Skin response to mechanical stress: adaptation rather than breakdown--a review of the literature.

The abnormal loading of skin and other surface tissues unaccustomed to bearing large mechanical forces occurs under many circumstances of chronic disease or disability. A result of abnormal loading is breakdown of the body wall tissues. An effective rehabilitation program avoids the pathological processes that result in skin trauma and breakdown and encourages load-tolerance and adaptation, changes in the body wall so that the tissues do not enter an irreversible degenerative pathological process. In the past, prevention has been the principal approach to the challenge of maintaining healthy skin and avoiding breakdown; therefore, relatively little is described in the rehabilitation literature about skin adaptation. However, adaptation has been investigated in other fields, particularly biomechanics and comparative anatomy. The purpose of this paper is to assemble the research to date to present the current understanding of skin response to mechanical stress, specifically addressing load cases applicable to rehabilitation. Factors important to tissue response are considered and their effects on adaptation and breakdown are discussed.

Preliminary results of speech-reception tests obtained with the synthetic Tadoma system.

In the Tadoma method of speech reception used by some deaf-blind individuals, speech is understood by placing a hand on the face of the talker and feeling certain mechanical actions of the face associated with speech production. The synthetic Tadoma system is a computer-driven artificial face that simulates these mechanical actions. This paper reports some preliminary data on the discrimination of nonsense syllables with the synthetic system. Although further work is required to produce an accurate simulation, the results suggest that such a goal is indeed achievable.

A case of cortical blindness due to carbon monoxide poisoning.

We report a case of cortical blindness occurring 7 days after acute CO poisoning with no other neurological or psychic deficits apart from denial of the blindness with visual confabulation and slight loss of retentive memory. There was scant correlation between the course of the clinical pattern, which cleared completely within 6 days, and the electroencephalographic pattern with marked and diffuse slowing, which did not recede completely during 3 months observation. CT scanning of the skull, initially within normal limits, displayed 2 weeks later a faint but diffuse hypodensity of the white substance, more marked in the occipital region, which was no longer present 80 days after the first scan.