Accuracy of a patient-specific instrumentation for coronal plane alignment of an anatomic alignment total knee arthroplasty system: A radiographic study.

BACKGROUND: Patient-individualised anatomic alignment in total knee arthroplasty (TKA) requires exact positioning of the tibial and femoral components. Patient-specific instrumentation (PSI) may be advantageous for implantation. However, the role of PSI in the instrumentation of such knee designs has not been investigated. OBJECTIVE: The aim of this study was to investigate the accuracy of a PSI system designed for patient-individualised anatomic alignment. METHODS: Fifty-four patients from a single centre were consecutively enrolled in this study. Patient-specific femoral and tibial cutting guides were manufactured using 3D models from computed tomography (CT) scans. All patients received an anatomic TKA implant design through an extension gap first technique. Postoperative radiography was taken, and implant component alignment and leg alignment were compared to the preoperative planning. RESULTS: Thirty-four patients were evaluable. Mean differences between planned angles values obtained from CT scans and the measured radiographic values were small and not significantly different from zero. CONCLUSIONS: Implantation of an anatomic knee design that allows individual component alignment using PSI is feasible. The percentage of component misalignment in the coronal plane was remarkably low. Whether this leads to clinical benefits requires further verification.

Foot and Ankle Surgical Incision Closure With Three Different Materials.

There is no clear recommendation for wound closure material in foot and ankle surgery. Thus, we hypothesized that there was no difference in clinical outcomes among 3 suture materials, namely, absorbable sutures, nonabsorbable sutures, and metallic staples. This study compared the 3 materials for wound closure in foot and ankle surgery. In this prospective randomized study, 124 patients were randomly divided into the nonabsorbable suture group, absorbable suture group, and staple group. ASEPSIS score, Hollander Wound Evaluation Scale, and numerical rating scale (regarding pain and satisfaction) were collected at first dressing changes, suture removal, and 6 weeks after surgery. Suture time and incision length were recorded. No significant differences were detected for the ASEPSIS and Hollander Wound Evaluation Scale scores. There was significantly more pain after 6 weeks in the nonabsorbable suture group. The closure time (13 s/cm) with staples was significantly lower in the nonabsorbable suture group than in the other groups. Regardless of wound closure material, male sex and obesity appeared to be associated with a higher risk for the occurrence of wound complications. The 3 suture materials showed no significant differences regarding the frequency of wound complications. Staples and absorbable sutures should therefore be considered in the repertoire of suture materials used in foot and ankle surgery.

The Ankle Spacer-a hemiarthroplasty for treatment of severe osteochondral defects of the talus.

OBJECTIVE: The Ankle Spacer system has been developed as a joint-preserving option for patients with failed treatment of large talar osteochondral defects (OCDs). It is a one-piece implant system that replaces the articulating upper talus surface of the tibiotalar joint. INDICATIONS: Large OCDs with failed prior surgical intervention(s) and/or multiple talar OCDs on the talar surface, posttraumatic or degenerative osteoarthritis, or avascular necrosis of the talus. CONTRAINDICATIONS: Severe malalignment exceeding 7° and other ankle deformities that would not allow proper rasping of the talus, obesity, blood supply limitations, severe osteopenia, and previous or active infections. SURGICAL TECHNIQUE: The surgery is carried out via a central approach to the ankle joint. The tibiotalar joint was distracted to remove the cartilage on the upper talar surface with special talus rasps and to perform microfracture of the entire talar surface. The appropriate Ankle Spacer trial was then inserted into the joint and fluoroscopy was used to check for proper trial size and positioning. After thorough cleaning of the prepared bone bed, the Ankle Spacer was inserted with a special seating instrument. POSTOPERATIVE MANAGEMENT: One surgeon in our center implanted ten Ankle Spacers between April 2018 and October 2019. The first short-term data with follow-up of 3 months were collated. RESULTS: No implant-related complications were recorded. American Orthopaedic Foot and Ankle Society (AOFAS) score increased from 55.5 to 79.5 points, European Foot and Ankle Society (EFAS) score increased from 5.6 to 13.5 points, and pain score decreased from 3 to 1.1 points. None of the patients' radiographs showed signs of loosening or osteoarthritis progression.

Erratum: The computed tomography based anatomy of the ossa cuneiformia.

There is a lack of basic anatomic informations regarding the ossa cuneiformia. The aim of the present descriptive study was the detailed evaluation of the anatomy of the ossa cuneiformia. We analyzed 100 computer tomography scans of feet without deformities or previous trauma. The length, height and width of each cuneiforme and their articular surfaces were assessed. We itemized the data to gender differences and to foot length. The medial cuneiforme os had a length of 23.8±2.4 mm (mean ± standard deviation), a width of 15.9±2.7 mm and a height of 26.9±3.6 mm. The respective values for the intermediate cuneiforme were 17.7±1.9 mm, 12.4±3.1 mm and 20.8±2.9 mm and for the lateral cuneiforme 24.3±2.9 mm, 14.9±2.9 mm and 17.3±4.3 mm. We found statistical relevant differences regarding gender and foot length subgroups whereas not for all parameters. The present study illustrates basic anatomic data regarding the ossa cuneiformia. This information might be helpful for implant design and placement during midfoot surgery.

Comparison of Isolated Screw to Plate and Screw Fixation for Tarsometatarsal Arthrodesis Including Clinical Outcome Predictors.

BACKGROUND: The common treatment for end-stage tarsometatarsal (TMT) arthritis is an arthrodesis of the affected joints. This study was performed to examine the clinical and radiographic outcome after TMT arthrodesis and to identify risk factors for postoperative complications. METHODS: A total of 101 patients with tarsometatarsal arthritis of at least 2 joints were retrospectively examined. Data were acquired using clinical and radiographic examination, pedobarographic analysis, and standardized questionnaires, including the European Foot and Ankle Society Score, the Foot and Ankle Outcome Score, a pain numeric rating scale (NRS), the 36-Item Short Form Health Survey, and the University of California at Los Angeles Activity (UCLA) Score. The fixation technique, any complications, and revision surgery were recorded. RESULTS: All scores improved significantly, except for the UCLA Score. The mean pain NRS score was significantly reduced from 7.7 preoperative to 3.0 postoperative (P < .05). The overall nonunion rate was 12.6%. Compared with 2 crossed-screw fixation, locking plate plus compression screw fixation was associated with a decreased nonunion rate (odds ratio [OR] 0.165, 95% confidence interval [CI] 0.032-0.854; P = .017). A body mass index >27 was significantly associated with a higher nonunion rate and wound healing problems (OR 12.05, 95% CI 1.430-101.468; P = .006; OR 5.03, 95% CI 1.273-19.871; P = .013). The overall reoperation rate was 25.2%. CONCLUSION: TMT arthrodesis of the medial and central column resulted in significant improvement in foot function and pain. A major complication was nonunion. Locking plate plus compression screw fixation was associated with a lower nonunion rate. LEVEL OF EVIDENCE: Level III, comparative series.

[Mini implants in foot and ankle surgery: an alternative to total joint replacement or joint fusion]. / Mini-Implantate am Fuß- und Sprunggelenk: Eine Alternative zur Vollprothese oder Versteifung.

Mini implants are increasingly used in foot and ankle surgery. They preserve the joints' functions, are easy to insert and easy to convert to an alternative treatment. Early surgical attempts using silastic implants did not bring the expected success. First achievements where reached with modern metallic mini implants in the first metatarsophalangeal (MTP) joint and the ankle joint. For a few years now, a polyvinyl alcohol implant has been used to treat the arthritic first MTP joint. Even severe arthritic joints can be treated with an implant made of polylactide. This implant can also be used in the treatment of Lisfranc joint pathologies. To address severe osteochondral defects of the talus, an innovative hemiarthroplasty implant has been suggested. This article gives a summary of currently used mini implants. Their application as possible alternatives to total joint replacement or joint fusion are critically reviewed in the light of the current literature.

Feasibility and reliability of DEXA analysis after total ankle arthroplasty: A cadaver study.

BACKGROUND: Although the outcomes of total ankle arthroplasty (TAA) have improved, unsolved problems such as stress shielding remain. Although dual energy X-ray absorptiometry (DEXA) is the "gold standard" for evaluation of these issues, it is rarely used in patients after TAA. This study aimed to establish a scan technique and to assess the mechanical changes in bone density caused by bone stock preparation. METHODS: Eight fresh-frozen cadaver legs were investigated by DEXA before TAA, with implant in situ, and after implant removal. Scan surface, bone mineral content, and bone mineral density were analysed to assess mechanical bone mass changes. RESULTS: We examined data for density changes by bone compression after TAA, and found "good" results for internal reliability but only "acceptable" results for external reliability. CONCLUSIONS: The results were reliable and reproducible. Using the present data, mechanical and biological processes can be considered together to understand the postoperative phases of bone remodelling after TAA.

Treatment concepts for pes valgoplanus with concomitant changes of the ankle joint : Tibiotalocalcaneal arthrodesis, total ankle replacement and joint-preserving surgery.

Concomitant valgus deformities of the ankle joint are found in approximately 3% of patients with symptomatic flat foot deformities. Conservative treatment is mostly successful only in the short term or in low-demand patients. The operative treatment of flat foot deformities follows the standard algorithm for flat foot treatment. The ankle joint can be treated while retaining mobility or by arthrodesis depending on the degree and rigidity of the deformity, degenerative changes, patient factors and expectations. Achieving an orthograde hindfoot and midfoot is obligatory for successful treatment as well as in ankle reconstructive or arthrodesis procedures.

Relevance of SPECT-CT in Complex Cases of Foot and Ankle Surgery: A Comparison With MRI.

BACKGROUND: Finding the right diagnoses in patients with complex foot and ankle disorders can be challenging. Single-photon emission computed tomography and computed tomography (SPECT-CT) has shown to be feasible in foot and ankle surgery. The aim of this study was to evaluate the reliability and accuracy of SPECT-CT and thereby its impact on final treatment decision compared with magnetic resonance imaging (MRI). METHODS: A retrospective study was performed on 49 patients treated at our institution. Experienced foot and ankle surgeons independently, and blinded, analyzed clinical data and radiographs together with MRI, SPECT-CT, or a combination of both. Based on the determined final treatment decision Cohen's kappa values were calculated to illustrate interrater and intrarater reliability. RESULTS: The kappa values for interrater reliability were higher for SPECT-CT at .68 and MRI + SPECT-CT at .71 compared to 0.38 for MRI alone (P < .05). The kappa values for intrarater reliability of MRI + SPECT-CT were higher at .75 compared with SPECT-CT alone at .67 (P < .05) and MRI at .35 (P < .01). CONCLUSION: We found a higher interrater and intrarater reliability for SPECT-CT compared with MRI alone for diagnosing complex foot and ankle pathologies. SPECT-CT has a high impact on final treatment decision. The main indications are bony pathologies with diagnostic uncertainty especially in closely adjacent structures as the joints of the midfoot, occult coalitio, stress fractures, verification or exclusion of nonfusion, periprosthetic disorders after total ankle replacement and osteochondral lesion in cases of combined pathologies.Levels of Evidence: Level IV: Retrospective study.

The computed tomographybased anatomy of the ossa cuneiformia.

There is a lack of basic anatomic information regarding the ossa cuneiformia. The aim of the present descriptive study was the detailed evaluation of the anatomy of the ossa cuneiformia. We analyzed 100 computer tomography scans of feet without deformities or previous trauma. The length, height and width of each cuneiforme and their articular surfaces were assessed. We itemized the data to gender differences and to foot length. The medial cuneiforme os had a length of 24.0 mm ± 2.4 (mean ± standard deviation), a width of 17.3 mm ± 2.8 and a height of 28.0 mm ± 3.4. The respective values for the intermediate cuneiforme were 18.2 mm ± 2.1, 15.8 mm ± 2.1 and 22.5 ± 2.2 and for the lateral cuneiforme 26.4 mm ± 2.7, 17.2 mm ± 2.9 and 22.8 mm ± 2.9. We found statistical relevant differences regarding gender and foot length subgroups whereas not for all parameters. The present study illustrates basic anatomic data regarding the ossa cuneiformia. This information might be helpful for implant design and placement during midfoot surgery.

'Pre-launch' finite element analysis of a short-stem total hip arthroplasty system consisting of two implant types.

BACKGROUND: We applied a previously established and validated numerical model to a novel short-stemmed implant for a 'pre-launch' investigation. METHODS: The implant system consists of two different implant geometries for valgus/varus-positioned proximal femurs with differences in volume distribution, head/neck angle, and calcar alignment. The aim of the design was to achieve a better adaption to the anatomic conditions, resulting in a favourable load transfer. The implant type G showed the best fit to our model, but both stem geometries were implanted; the implant type B was used to compute an 'imperfection scenario'. FINDINGS: Apparent bone density decreased by 4.3% in the entire femur with the implant type G, and by 12.3% with the implant type B. Bone mass loss was pronounced in the proximal calcar region. Apparent bone density increased at the lateral cortical ring and in the minor trochanter. The apparent bone density in the imperfection scenario was very similar to that of a straight stem, indicating a distal load transfer. INTERPRETATION: No adverse effects of the A2 short-stemmed implant system on bone remodeling could be detected. The overall bone density reduction was acceptable, and wedge fixation was not observed, indicating that there was no distal load transfer. The simulation of an incongruous implant indicates the sensitivity of our model in response to modifications of implant positioning. Correct implant selection and positioning is crucial when using the A2 system.

Comparative investigation of bone mineral density using CT and DEXA in a canine femoral model.

Bone density measurements using computed tomography (CT) instead of dual-energy X-ray absorptiometry (DEXA) are currently of great interest in human and veterinary medical research as it would be beneficial to use CT scans obtained for other indications also for determining bone density. For Hounsfield units (HU) measured with CT in specific regions of interests (ROIs) in one or several slice/s a correlation with bone mineral density (BMD) measured by DEXA in humans and dogs of between 0.44 and 0.77 is reported in the literature. In the present study, instead certain volumes of interest (VOIs) obtained by CT scan and the corresponding HU to the respective VOIs were compared with the bone mineral density of the corresponding areas measured by DEXA. The aim of the study was to investigate whether this procedure gives more accurate information about bone density of the bones as three-dimensional objects of the respective patient. Correlation between measured HU in the respective VOI and BMD measured with DEXA in the corresponding ROI showed a very good correlation of 0.93. Linear regression with R2 = 0.85 (p = 0.0262) was calculated. Except for VOI5, similar distribution of values and significant differences (p < 0.0001-0.0087) between ROIs/VOIs were detected. Determining HU for assessing bone mineral density in a certain volume provides more accurate results than those previously reported from two-dimensional (2D) CT measurements. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2667-2672, 2017.

Finite element model of a novel short stemmed total hip arthroplasty implant developed from cross sectional CT scans.

BACKGROUND: Numerous short stemmed total hip arthroplasty (THA) implants have been introduced over the last decades. It is questionable if little differences between the implant designs affect stress shielding and bone remodeling. The finite element analysis allows an evaluation of the design rationale of the implant without negative side effects for the patient. OBJECTIVE: We investigated a relatively new short stemmed implant designed from clustered CT datasets of proximal femurs. How does the implant affect femoral bone remodeling? Can we see a positive effect on bone remodeling from the CT based design? METHODS: We used a Finite Element Model that was validated by a prospective dual-energy-x-ray-absorptiometry study to calculate apparent bone density. RESULTS: Apparent bone density (ABD) decreased by 2.3% in the entire femur. Bone mass loss was pronounced in the proximal calcar region. Little ABD increase was seen in the lateral aspect of the cortical ring, in the minor trochanter area and at the lateral aspect of the stem. CONCLUSIONS: ABD reduction occurs in the proximal regions of the femur. The overall bone mass loss was little after THA with the investigated implant. The specific design seems to have no major effect on stress shielding or load distribution.

Numeric simulation of bone remodelling patterns after implantation of a cementless straight stem.

PURPOSE: For further development of better bone-preserving implants in total hip arthroplasty (THA), we need to look back and analyse established and clinically approved implants to find out what made them successful. Finite element analysis can help do this by simulating periprosthetic bone remodelling under different conditions. Our aim was thus to establish a numerical model of the cementless straight stem for which good long-term results have been obtained. METHODS: We performed a numeric simulation of a cementless straight stem, which has been successfully used in its unaltered form since 1986/1987. We have 20 years of experience with this THA system and implanted it 555 times in 2012. We performed qualitative and quantitative validation using bone density data derived from a prospective dual-energy X-ray absorptiometry (DEXA) investigation. RESULTS: Bone mass loss converged to 9.25% for the entire femur. No change in bone density was calculated distal to the tip of the prosthesis. Bone mass decreased by 46.2% around the proximal half of the implant and by 7.6% in the diaphysis. The numeric model was in excellent agreement with DEXA data except for the calcar region, where deviation was 67.7%. CONCLUSIONS: The higher deviation in the calcar region is possibly a sign of the complex interactions between the titanium coating on the stem and the surrounding bone. We developed a validated numeric model to simulate bone remodelling for different stem-design modifications. We recommend that new THA implants undergo critical numeric simulation before clinical application.

Finite element model of a novel short stemmed total hip arthroplasty implant developed from cross sectional CT scans.

BACKGROUND: Numerous short stemmed total hip arthroplasty (THA) implants have been introduced over the last decades. It is questionable if little differences between the implant designs affect stress shielding and bone remodeling. The finite element analysis allows an evaluation of the design rationale of the implant without negative side effects for the patient.OBJECTIVE: We investigated a relatively new short stemmed implant designed from clustered CT datasets of proximal femurs. How does the implant affect femoral bone remodeling? Can we see a positive effect on bone remodeling from the CT based design? METHODS: We used a Finite Element Model that was validated by a prospective dual-energy-x-ray-absorptiometry study to calculate apparent bone density.RESULTS: Apparent bone density (ABD) decreased by 2.3% in the entire femur. Bone mass loss was pronounced in the proximal calcar region. Little ABD increase was seen in the lateral aspect of the cortical ring, in the minor trochanter area and at the lateral aspect of the stem. CONCLUSIONS: ABD reduction occurs in the proximal regions of the femur. The overall bone mass loss was little after THA with the investigated implant. The specific design seems to have no major effect on stress shielding or load distribution.

Clinical results of the metha short hip stem: a perspective for younger patients?

In recent years, various uncemented proximal metaphyseal hip stems were introduced for younger patients as a bone preserving strategy. Initial osteodensitometric analyses of the surrounding bone of short stems indicate an increase of bone mass with secondary bone ingrowth fixation as a predictor of long-term survival of these types of implants. We report the outcome of 151 modular Metha short hip stem implants in 148 patients between March 2005 and October 2007. The mean follow-up was 5.8±0.7 years and the mean age of the patients was 55.7±9.8 years. Along with demographic data and co-morbidities, the Harris Hip Score (HHS), the Hip dysfunction and Osteoarthritis Outcome Score (HOOS), and also the results of a patient-administered questionnaire were recorded pre-operatively and at follow-up. The mean HHS increased from 46±17 pre-operatively to 90±5 the HOOS improved from 55±16 pre-operatively to 89±10 at the final follow-up. A total of three patients have been revised, two for subsidence with femoral revision and one for infection without femoral revision (Kaplan Meier survival estimate 98%). The radiological findings showed no radiolucent lines in any of the patients. The modular Metha short hip stem was implanted in younger patients, who reported an overall high level of satisfaction. The clinical and radiographic results give support to the principle of using short stems with metaphyseal anchorage. However, long-term results are necessary to confirm the success of this concept in the years to come.

The cementless Bicontact stem in a prospective dual-energy X-ray absorptiometry study.

PURPOSE: The cementless Bicontact total hip arthroplasty (THA) system (AESCULAP AG, Tuttlingen, Germany) was introduced in 1986/1987 and has been in successful clinical use in an unaltered form up to today. Although good long-term results with the Bicontact stem have been published, it is questionable whether the implant provides the criteria for a state-of-the-art stem regarding proximal bone stock preservation. The purpose of the study was to monitor the periprosthetic bone mineral density (BMD) in a prospective two-year follow-up dual-energy X-ray absorptiometry (DEXA) study. METHODS: After power analysis, a consecutive series of 25 patients with unilateral Bicontact stem implantation was examined clinically and underwent DEXA examinations. Scans of seven regions of interest were taken preoperatively and at one week, six months, and one and two years. RESULTS: One patient required stem revision due to a deep infection. The Harris Hip Score increased significantly by 44 points. The most significant bone loss was observed in the calcar region (R7) in the first six months (-19.2 %). It recovered in the following 18 months to -8.5 %. The BMD in the greater trochanter dropped significantly after six months and remained stable at this level. BMD exceeded baseline values in distal regions and even more in the lesser trochanter region after two years. CONCLUSIONS: We conclude that the Bicontact stem provides adequate proximal bone stock preservation. We observed some signs of stress shielding at the tip of the stem, which is inevitable to some degree in THA with cementless straight stems. However, in this prospective DEXA investigation, we showed that proximal off-loading does not occur after THA with the Bicontact system. Thus, we believe that this stem is still a state-of-the-art implant.

Bone remodelling around a cementless straight THA stem: a prospective dual-energy X-ray absorptiometry study.

The design of the Bicontact® stem (BBraun, Aesculap, Tuttlingen, Germany) and the implantation technique have undergone no major alterations in the last 20 years leading, and good clinical results have been reported. The aim of our study was to investigate whether the implant encourages beneficial bone remodelling. Twenty-four patients were included in a prospective dual-energy X-ray absorptiometry (DEXA) study of this stem, after appropriate statistical power analysis. Preoperative and postoperative (1 week, 6 months, and 12 months) clinical and DEXA examinations were performed. The Harris Hip Score increased significantly by 39 points. The strongest decreases in BMD were observed in the greater trochanter region (-11%) and the calcar (-12%). In the second half of the study period the bone mineral density recovered slightly and even returned to baseline values in the lesser trochanter region. Therefore, proximal load transfer and physiological bone remodelling around the Bicontact® stem appeared to be achieved.

Clinical and radiological results after implantation of the femoral neck preserving Delfi M hip prosthesis: a case series.

Various types of bone preserving total hip prostheses with a proximal force transmission concept have been developed for younger adults, one of these being the implant "Delfi M®", produced by ESKA until 2009. Since the demand could not meet the expectations, the production was stopped due to economic reasons so that only 31 implants of this type were sold and even less actually implanted. This study followed up 15 Delfi M® prostheses in 12 patients for 3.1 years and represents the only existing valid data about this implant.Demographical, preoperative and postoperative data including clinical scores (HOOS and mHHS) were collected retrospectively. Postoperative X-rays were analyzed by an independent radiologist. One implant had to be exchanged due to an infection and another one due to excessive implant migration. The mHHS and the HOOS scores showed a significant improvement after surgery. In the radiological analysis, there were no signs of radiolucent lines or osteolyses.This trial demonstrates good clinical and radiological midterm results for the Delfi M prosthesis. Limitations of this study are a small sample size and a follow-up time of 3 years at only one timepoint.