ABSTRACT
In this paper, recycled polyethylene terephthalate (PET) was used to produce eco-innovative engineering materials with optimized performance, minimizing the environmental impact deriving from plastic consumption activity and limiting the continuous consumption of raw materials. The recycled PET obtained from waste bottles, commonly used to improve the ductility of concrete, has been used with a different weight percentage as plastic aggregate in the replacement of sand in cement mortars and as fibers added to premixed screeds. In detail, the effect of PET treatment (chemical or mechanical) on the thermal performance was evaluated. Non-destructive physical tests were conducted to determine the thermal conductivity of the investigated building materials. The performed tests showed that chemically depolymerized PET aggregate and recycled PET fibers derived from plastic wastes can reduce the heat conduction capacity of the cementitious materials with limited reduction in compressive strength. The results of the experimental campaign have made it possible to evaluate the influence of the recycled material on the physical and mechanical properties and its feasibility in non-structural applications.
ABSTRACT
In this article, the effectiveness of the bioconsolidation technique applied to degraded structural materials is illustrated as a new method of consolidation and conservation of the existing building heritage in a less invasive way. Satisfactory results have been obtained by an experimental campaign carried out through non-destructive diagnostic tests, static destructive mechanical tests, and microstructural analyses on a series of natural stone material specimens and artificial stone materials before and after the use of bioconsolidants. The consolidated specimens have been tested after three to four weeks after the application of the M3P nutritional solution on each specimen. The effect on the microstructure of this technique has also been observed using scanning electron microscope and optical photomicrograph, the formation of new calcium carbonate crystals promoting the structural consolidation of the materials under examination was observed in all the specimens analyzed.
ABSTRACT
In this paper, a non-destructive technique based on the monitoring of the environmental vibrations of two strategic buildings by positioning accelerometers in well-defined points was used for fixing their dynamic behavior. The accelerometers measurements were elaborated through Operational Modal Analysis (OMA) techniques, in order to identify natural frequencies, damping coefficients, and modal shapes of the structure. Once these parameters have been determined, a numerical model calibrated on the identified frequencies and verified on the corresponding mode shapes was created for each building. The structural operational efficiency index of the buildings was determined by using the Seismic Model Ambient Vibration (SMAV) methodology, which allows us to evaluate their seismic vulnerability. The results obtained from the experimental analysis (on three different tests for each analyzed building) concern the frequencies and the modal shapes of the structure. They have been compared to the results of the finite element model, with a very small error, indicating a good quality of the analysis and also the possibility of using directly well-tuned models for verifying the structural operating indices.
