Structure of LRRK2 in Parkinson's disease and model for microtubule interaction.

Leucine-rich repeat kinase 2 (LRRK2) is the most commonly mutated gene in familial Parkinson's disease1 and is also linked to its idiopathic form2. LRRK2 has been proposed to function in membrane trafficking3 and colocalizes with microtubules4. Despite the fundamental importance of LRRK2 for understanding and treating Parkinson's disease, structural information on the enzyme is limited. Here we report the structure of the catalytic half of LRRK2, and an atomic model of microtubule-associated LRRK2 built using a reported cryo-electron tomography in situ structure5. We propose that the conformation of the LRRK2 kinase domain regulates its interactions with microtubules, with a closed conformation favouring oligomerization on microtubules. We show that the catalytic half of LRRK2 is sufficient for filament formation and blocks the motility of the microtubule-based motors kinesin 1 and cytoplasmic dynein 1 in vitro. Kinase inhibitors that stabilize an open conformation relieve this interference and reduce the formation of LRRK2 filaments in cells, whereas inhibitors that stabilize a closed conformation do not. Our findings suggest that LRRK2 can act as a roadblock for microtubule-based motors and have implications for the design of therapeutic LRRK2 kinase inhibitors.

Tug-of-war in motor protein ensembles revealed with a programmable DNA origami scaffold.

Cytoplasmic dynein and kinesin-1 are microtubule-based motors with opposite polarity that transport a wide variety of cargo in eukaryotic cells. Many cellular cargos demonstrate bidirectional movement due to the presence of ensembles of dynein and kinesin, but are ultimately sorted with spatial and temporal precision. To investigate the mechanisms that coordinate motor ensemble behavior, we built a programmable synthetic cargo using three-dimensional DNA origami to which varying numbers of DNA oligonucleotide-linked motors could be attached, allowing for control of motor type, number, spacing, and orientation in vitro. In ensembles of one to seven identical-polarity motors, motor number had minimal affect on directional velocity, whereas ensembles of opposite-polarity motors engaged in a tug-of-war resolvable by disengaging one motor species.

Structural basis for microtubule binding and release by dynein.

Cytoplasmic dynein is a microtubule-based motor required for intracellular transport and cell division. Its movement involves coupling cycles of track binding and release with cycles of force-generating nucleotide hydrolysis. How this is accomplished given the ~25 nanometers separating dynein's track- and nucleotide-binding sites is not understood. Here, we present a subnanometer-resolution structure of dynein's microtubule-binding domain bound to microtubules by cryo-electron microscopy that was used to generate a pseudo-atomic model of the complex with molecular dynamics. We identified large rearrangements triggered by track binding and specific interactions, confirmed by mutagenesis and single-molecule motility assays, which tune dynein's affinity for microtubules. Our results provide a molecular model for how dynein's binding to microtubules is communicated to the rest of the motor.

A model for the gamma delta resolvase synaptic complex.

The serine recombinase gamma delta resolvase performs site-specific recombination in an elaborate synaptic complex containing 12 resolvase subunits and two 114-base pair res sites. Here we present an alternative structural model for the synaptic complex. Resolvase subunits in the complex contact their neighbors in equivalent ways, using three principal interactions, one of which is a newly proposed synaptic interaction. Evidence in support of this interaction is provided by mutations at the interface that either enable resolvase to synapse two copies of site I or inhibit synapsis of complete res sites. In our model, the two crossover sites are far apart, separated by the resolvase catalytic domains bound to them. Thus, recombination would require a substantial rearrangement of resolvase subunits or domains.

Contacts between the 5' nuclease of DNA polymerase I and its DNA substrate.

The 5' nuclease of DNA polymerase I (Pol I) of Escherichia coli is a member of an important class of prokaryotic and eukaryotic nucleases, involved in DNA replication and repair, with specificity for the junction between single-stranded and duplex DNA. We have investigated the interaction of the 5' nuclease domain with DNA substrates from the standpoint of both the protein and the DNA. Phosphate ethylation interference showed that the nuclease binds to the nucleotides immediately surrounding the cleavage site and also contacts the complementary strand one-half turn away, indicating that contacts are made to one face only of the duplex portion of the DNA substrate. Phosphodiester contacts were investigated further using DNA substrates carrying unique methylphosphonate substitutions, together with mutations in the 5' nuclease. These experiments suggested that two highly conserved basic residues, Lys(78) and Arg(81), are close to the phosphodiester immediately 5' to the cleavage site, while a third highly conserved residue, Arg(20), may interact with the phosphodiester 3' to the cleavage site. Our results provide strong support for a DNA binding model proposed for the related exonuclease from bacteriophage T5, in which the conserved basic residues mentioned above define the two ends of a helical arch that forms part of the single-stranded DNA-binding region. The nine highly conserved carboxylates in the active site region appear to play a relatively minor role in substrate binding, although they are crucial for catalysis. In addition to binding the DNA backbone around the cleavage point, the 5' nuclease also has a binding site for one or two frayed bases at the 3' end of an upstream primer strand. In agreement with work in related systems, 5' nuclease cleavage is blocked by duplex DNA in the 5' tail, but the enzyme is quite tolerant of abasic DNA or polarity reversal within the 5' tail.

Neural regulation of alpha-dystroglycan biosynthesis and glycosylation in skeletal muscle.

Alpha-dystroglycan (alpha-DG) is part of a complex of cell surface proteins linked to dystrophin or utrophin, which is distributed over the myofiber surface and is concentrated at neuromuscular junctions. In laminin overlays of muscle extracts from developing chick hindlimb muscle, alpha-DG first appears at embryonic day (E) 10 with an apparent molecular mass of 120 kDa. By E15 it is replaced by smaller (approximately 100 kDa) and larger (approximately 150 kDa) isoforms. The larger form increases in amount and in molecular mass (>200 kDa) as the muscle is innervated and the postsynaptic membrane differentiates (E10-E20), and then decreases dramatically in amount after hatching. In myoblasts differentiating in culture the molecular mass of alpha-DG is not significantly increased by their replication, fusion, or differentiation into myotubes. Monoclonal antibody IIH6, which recognizes a carbohydrate epitope on alpha-DG, preferentially binds to the larger forms, suggesting that the core protein is differentially glycosylated beginning at E16. Consistent with prior observations implicating the IIH6 epitope in laminin binding, the smaller forms of alpha-DG bind more weakly to laminin affinity columns than the larger ones. In blots of adult rat skeletal muscle probed with radiolabeled laminin or monoclonal antibody IIH6, alpha-DG appears as a >200-kDa band that decreases in molecular mass but increases in intensity following denervation. Northern blots reveal a single mRNA transcript, indicating that the reduction in molecular mass of alpha-DG after denervation is not obviously a result of alternative splicing but is likely due to posttranslational modification of newly synthesized molecules. The regulation of alpha-DG by the nerve and its increased affinity for laminin suggest that glycosylation of this protein may be important in myofiber-basement membrane interactions during development and after denervation.

In vitro transposition of Tn552: a tool for DNA sequencing and mutagenesis.

We have explored the potential of the Tn 552 in vitro transposition reaction as a genetic tool. The reaction is simple (requiring a single protein component), robust and efficient, readily producing insertions into several percent of target DNA. Most importantly, Tn 552 insertions in vitro appear to be essentially random. Extensive analyses indicate that the transposon exhibits no significant regional or sequence specificity for target DNA and leaves no discernible 'cold' spots devoid of insertions. The utility of the in vitro reaction for DNA sequencing was demonstrated with a cosmid containing the Mycobacterium smegmatis recBCD gene cluster. The nucleotide sequence of the entire operon was determined using 71 independent Tn 552 insertions, which generated over 13.5 kb of unique sequence and simultaneously provided a comprehensive collection of insertion mutants. The relatively short ends of Tn 552 make construction of novel transposons a simple process and we describe several useful derivatives. The data presented suggest that Tn 552 transposition is a valuable addition to the arsenal of tools available for molecular biology and genomics.

Tn552 transposase catalyzes concerted strand transfer in vitro.

The Tn552 transposase, a member of the DDE superfamily of transposase and retroviral integrase proteins, has been expressed in soluble form. The purified protein performs concerted strand transfer in vitro, efficiently pairing two preprocessed transposon ends and inserting them into target DNA. For maximum efficiency, both participating DNA ends must contain the two adjacent transposase-binding sites that are the normal constituents of the Tn552 termini. As is the case with transposition in vivo, the insertions recovered from the reaction in vitro are flanked by repeats of a short target sequence, most frequently 6 bp. The reaction has stringent requirements for a divalent metal ion. Concerted strand transfer is most efficient with Mg2+. Although it stimulates strand transfer overall, Mn2+ promotes uncoupled, single-ended events at the expense of concerted insertions. The simplicity and efficiency of the Tn552 transposition system make it an attractive subject for structural and biochemical studies and a potentially useful genetic tool.

The tyrosine-6 hydroxyl of gamma delta resolvase is not required for the DNA cleavage and rejoining reactions.

Site-specific recombinases of the resolvase and DNA invertase family all contain a tyrosine residue close to the N-terminus, and four residues away from a serine that has been implicated in catalysis of DNA strand breakage and reunion. To examine the role of this tyrosine in recombination, we have constructed a mutant of gamma delta resolvase in which the tyrosine (residue 6) is replaced by phenylalanine. Characterization of the Y6F mutant protein in vitro indicated that although it was highly defective in recombination, it could cleave DNA at the cross-over site, form a covalent resolvase-DNA complex and rejoin the cleaved cross-over site (usually restoring the parental site). These data rule out a direct role of the Tyr-6 hydroxyl as the nucleophile in the DNA cleavage reaction and strengthen the conclusion that this nucleophile is the nearby invariant serine residue, Ser-10. We conclude that Tyr-6 is essential for fully co-ordinated strand cleavage and exchange, but is dispensable for individual strand cleavage and religation reactions.