Linear Mixed Model of Virus Disinfection by Free Chlorine to Harmonize Data Collected across Broad Environmental Conditions.

Despite the critical importance of virus disinfection by chlorine, our fundamental understanding of the relative susceptibility of different viruses to chlorine and robust quantitative relationships between virus disinfection rate constants and environmental parameters remains limited. We conducted a systematic review of virus inactivation by free chlorine and used the resulting data set to develop a linear mixed model that estimates chlorine inactivation rate constants for viruses based on experimental conditions. 570 data points were collected in our systematic review, representing 82 viruses over a broad range of environmental conditions. The harmonized inactivation rate constants under reference conditions (pH = 7.53, T = 20 °C, [Cl-] < 50 mM) spanned 5 orders of magnitude, ranging from 0.0196 to 1150 L mg-1 min-1, and uncovered important trends between viruses. Whereas common surrogate bacteriophage MS2 does not serve as a conservative chlorine disinfection surrogate for many human viruses, CVB5 was one of the most resistant viruses in the data set. The model quantifies the role of pH, temperature, and chloride levels across viruses, and an online tool allows users to estimate rate constants for viruses and conditions of interest. Results from the model identified potential shortcomings in current U.S. EPA drinking water disinfection requirements.

Green conversion of waste alkaline battery material to zeolitic imidazolate framework-8 and its iodine capture mechanism.

Zeolitic imidazolate framework-8 (ZIF-8) exhibits excellent performance in capturing iodine. However, the solvent-based procedures and raw materials for ZIF-8 synthesis often lead to secondary pollution. We developed a solvent-minimizing method for preparing ZIF-8 via ball milling of raw material obtained from spent alkaline batteries, and studied its iodine-capture performance and structural changes. Exposure of the ZIF-8 to iodine vapor for 60 min demonstrated that it exhibited industrially competitive iodine-capture performance (the adsorbed amount reaches to 1123 mg g-1 within 60 min). Spectroscopic studies showed that ZIF-8 underwent a structural transformation upon iodine loading. Iodine molecules were adsorbed onto the surface of ZIF-8 and also formed C-I bond with the methyl groups on the imidazole rings, reducing iodine release. This work represents a comprehensive revelation of long-range order and short-range order evolution of ZIF-8 during iodine vapor adsorption over time. Moreover, this green synthesis of ZIF-8 is of lower cost and generates fewer harmful by-products than existing methods, and the produced ZIF-8 effectively entraps toxic iodine vapor. Thus, this synthesis enables a sustainable and circular material flow for beneficial utilization of waste materials.

Self-consumed strategy to reuse cathode residue for Zn stabilization in spent batteries: Structural properties and metal stabilization effect.

Due to ecotoxicity, zinc (Zn) as a heavy metal from electronic waste (e-waste) has been a source of pollution to soil and water for several decades. This study proposes a solution to this serious environmental problem via a self-consumed strategy to stabilize Zn in anode residues. This unique method uses cathode residues from spent zinc-manganese oxide (Zn-Mn) batteries as a stabilized matrix via thermal treatment. More specifically, the strategy incorporates zinc metal into a chemically durable matrix comprised of a lattice of AB2O4 compounds. Results demonstrate that 5-20 wt% of anode residue were fully incorporated into the cathode residue to form a Mn3-xZnxO4 solid solution after sintering at 1300 ℃ for 3 h. The lattice parameters of the Mn3-xZnxO4 solid solution reveal an approximately linear decreasing evolution with the addition of anode residue. To determine the occupancy of Zn in the crystal structure of the products, we used Raman and Rietveld refinement processes; the results reveal that Mn2+ in the 4a site was gradually replaced by Zn2+. We then used a prolonged toxicity leaching procedure to evaluate the Zn stabilization effect after phase transformation; this showed that the Zn leachability of sintered anode-doped cathode sample was over 40 folds lower than that of untreated anode residue. Therefore, this study presents an economical and effective strategy for mitigating the presence of heavy metal pollutants derived from e-waste.

UiO66-Derived Catalyst for Low Temperature Catalytic Reduction of NO with NH3.

Diesel exhaust emissions are major outdoor air pollutants. Reducing the emission of NOx by diesel commercial vehicles and related machineries is at present a great challenge. In this study, we synthesize a catalyst for low-temperature catalytic reduction of NO using calcinated UiO-66(Zr) as a host for the doping of cerium, manganese, and titanium by the incipient wetness impregnation, followed by the dispersion of 1.0 wt % platinum. A solid solution of Ce0.15Zr0.54Mn0.11Ti0.20O2/1.0Pt (CZMTO/Pt) is synthesized as evident by the structural characterizations. The catalyst demonstrates significant NO reduction in the laboratory due to the synergistic effect of various elements, with NO conversion above 80% at 160 °C.

Intracranial aneurysms: midterm outcome of pipeline embolization device--a prospective study in 143 patients with 178 aneurysms.

PURPOSE: To evaluate the midterm clinical and angiographic outcomes after pipeline embolization device (PED) placement for treatment of intracranial aneurysms. MATERIALS AND METHODS: This prospective nonrandomized multicenter study was approved by the review boards of all involved centers; informed consent was obtained. Patients (143 patients, 178 aneurysms) with unruptured saccular or fusiform aneurysms or recurrent aneurysms after previous treatment were included and observed angiographically for up to 18 months and clinically for up to 3 years. Study endpoints included complete aneurysm occlusion; neurologic complications within 30 days and up to 3 years; clinical outcome of cranial nerve palsy after PED placement; angiographic evidence of occlusion or stenosis of parent artery and that of occlusion of covered side branches at 6, 12, and 18 months; and clinical and computed tomographic evidence of perforator infarction. RESULTS: There were five (3.5%) cases of periprocedural death or major stroke (modified Rankin Scale [mRS] > 3) (95% confidence interval [CI]: 1.3%, 8.4%), including two posttreatment delayed ruptures, two intracerebral hemorrhages, and one thromboembolism. Five (3.5%) patients had minor neurologic complications within 30 days (mRS = 1) (95% CI: 1.3%, 8.4%), including transient ischemic attack (n = 2), small cerebral infarction (n = 2), and cranial nerve palsy (n = 1). Beyond 30 days, there was one fatal intracerebral hemorrhage and one transient ischemic attack. Ten of 13 patients (95% CI: 46%, 93.8%) completely recovered from symptoms of cranial nerve palsy within a median of 3.5 months. Angiographic results at 18 months revealed a complete aneurysm occlusion rate of 84% (49 of 58; 95% CI: 72.1%, 92.2%), with no cases of parent artery occlusion, parent artery stenosis (<50%) in three patients, and occlusion of a covered side branch in two cases (posterior communicating arteries). Perforator infarction did not occur. CONCLUSION: PED placement is a reasonably safe and effective treatment for intracranial aneurysms. The treatment is promising for aneurysms of unfavorable morphologic features, such as wide neck, large size, fusiform morphology, incorporation of side branches, and posttreatment recanalization, and should be considered a first choice for treating unruptured aneurysms and recurrent aneurysms after previous treatments. SUPPLEMENTAL MATERIAL: http://radiology.rsna.org/lookup/suppl/doi:10.1148/radiol.12120422/-/DC1.