Synergism of primary and secondary interactions in a crystalline hydrogen peroxide complex with tin.

Despite the significance of H2O2-metal adducts in catalysis, materials science and biotechnology, the nature of the interactions between H2O2 and metal cations remains elusive and debatable. This is primarily due to the extremely weak coordinating ability of H2O2, which poses challenges in characterizing and understanding the specific nature of these interactions. Herein, we present an approach to obtain H2O2-metal complexes that employs neat H2O2 as both solvent and ligand. SnCl4 effectively binds H2O2, forming a SnCl4(H2O2)2 complex, as confirmed by 119Sn and 17O NMR spectroscopy. Crystalline adducts, SnCl4(H2O2)2·H2O2·18-crown-6 and 2[SnCl4(H2O2)(H2O)]·18-crown-6, are isolated and characterized by X-ray diffraction, providing the complete characterization of the hydrogen bonding of H2O2 ligands including geometric parameters and energy values. DFT analysis reveals the synergy between a coordinative bond of H2O2 with metal cation and its hydrogen bonding with a second coordination sphere. This synergism of primary and secondary interactions might be a key to understanding H2O2 reactivity in biological systems.

Enhanced charge capacity and stability of Germanium(IV) Sulfide-Based anodes through Triton X100-Assisted synthesis and polysulfide shuttle mitigation.

Highly soluble germanium oxide,an amorphous macroreticular form of germanium oxide, was used as a precursor for the deposition of GeS2on reduced graphene oxide (rGO) through a low-temperature, wet-chemistry process. Thermal treatment of the solid provided an ultrathin rGO - supported amorphous GeS2coating. The GeS2@rGO composite was tested as a lithium ion battery (LIB) anode. Leveraging the versatility of wet chemistry processing, we employed strategies initially developed for mitigating polysulfide shuttle effects in lithium-sulfur batteries to enhance anode performance. The anode exhibited exceptional stability, surpassing 1000 cycles, with charge capacities exceeding 1220 and 870 mAh.g-1 at rates of 2 and 5 A.g-1, respectively. Performance improvements were achieved by minimizing GeS2 grain size using the non-ionic surfactant Triton X-100 during synthesis and preventing polysulfide shuttle effects through a negatively charged thick glass fiber separator, fluoroethylene carbonate additive (FEC) in EC:DEC (ethylene carbonate: diethyl carbonate) solvent, and a polyacrylic acid (PAA) binder. These cumulative modifications more than tripled the charge capacity of the germanium sulfide LIB anode. Feasibility was further demonstrated through full cell studies using a LiCoO2 counter electrode.

Organoantimony Dihydroperoxides: Synthesis, Crystal Structures, and Hydrogen Bonding Networks.

Despite growing interest in the potential applications of p-block hydroperoxo complexes, the chemistry of inorganic hydroperoxides remains largely unexplored. For instance, single-crystal structures of antimony hydroperoxo complexes have not been reported to date. Herein, we present the synthesis of six triaryl and trialkylantimony dihydroperoxides [Me3Sb(OOH)2, Me3Sb(OOH)2·H2O, Ph3Sb(OOH)2·0.75(C4H8O), Ph3Sb(OOH)2·2CH3OH, pTol3Sb(OOH)2, pTol3Sb(OOH)2·2(C4H8O)], obtained by the reaction of the corresponding dibromide antimony(V) complexes with an excess of highly concentrated hydrogen peroxide in the presence of ammonia. The obtained compounds were characterized by single-crystal and powder X-ray diffraction, Fourier transform infrared and Raman spectroscopies, and thermal analysis. The crystal structures of all six compounds reveal hydrogen-bonded networks formed by hydroperoxo ligands. In addition to the previously reported double hydrogen bonding, new types of hydrogen-bonded motifs formed by hydroperoxo ligands were found, including infinite hydroperoxo chains. Solid-state density functional theory calculation of Me3Sb(OOH)2 revealed reasonably strong hydrogen bonding between OOH ligands with an energy of 35 kJ/mol. Additionally, the potential application of Ph3Sb(OOH)2·0.75(C4H8O) as a two-electron oxidant for the enantioselective epoxidation of olefins was investigated in comparison with Ph3SiOOH, Ph3PbOOH, t-BuOOH, and H2O2.

Electrochemical Behavior of Reduced Graphene Oxide Supported Germanium Oxide, Germanium Nitride, and Germanium Phosphide as Lithium-Ion Battery Anodes Obtained from Highly Soluble Germanium Oxide.

Germanium and germanium-based compounds are widely used in microelectronics, optics, solar cells, and sensors. Recently, germanium and its oxides, nitrides, and phosphides have been studied as active electrode materials in lithium- and sodium-ion battery anodes. Herein, the newly introduced highly soluble germanium oxide (HSGO) was used as a versatile precursor for germanium-based functional materials. In the first stage, a germanium-dioxide-reduced graphene oxide (rGO) composite was obtained by complete precipitation of GeO2 nanoparticles on the GO from an aqueous solution of HSGO and subsequent thermal treatment in argon at low temperature. The composition of the composite, GeO2-rGO (20 to 80 wt.% of crystalline phase), was able to be accurately determined by the HSGO to GO ratio in the initial solution since complete deposition and precipitation were achieved. The chemical activity of germanium dioxide nanoparticles deposited on reduced graphene oxide was shown by conversion to rGO-supported germanium nitride and phosphide phases. The GeP-rGO and Ge3N4-rGO composites with different morphologies were prepared in this study for the first time. As a test case, composite materials with different loadings of GeO2, GeP, and Ge3N4 were evaluated as lithium-ion battery anodes. Reversible conversion-alloying was demonstrated in all cases, and for the low-germanium loading range (20 wt.%), almost theoretical charge capacity based on the germanium content was attained at 100 mA g-1 (i.e., 2595 vs. 2465 mAh g-1 for Ge3N4 and 1790 vs. 1850 mAh g-1 for GeP). The germanium oxide was less efficiently exploited due to its lower conversion reversibility.

Speciation of Tellurium(VI) in Aqueous Solutions: Identification of Trinuclear Tellurates by 17O, 123Te, and 125Te NMR Spectroscopy.

Tellurates have attracted the attention of researchers over the past decade due to their properties and as less toxic forms of tellurium derivatives. However, the speciation of Te(VI) in aqueous solutions has not been comprehensively studied. We present a study of the equilibrium speciation of tellurates in aqueous solutions at a wide pH range, 2.5-15 by 17O, 123Te, and 125Te NMR spectroscopy. The coexistence of monomeric, dimeric, and trimeric oxidotellurate species in chemical equilibrium at a wide pH range has been shown. NMR spectroscopy, DFT computations, and single-crystal X-ray diffraction studies confirmed the formation and coexistence of trimeric tellurate anions with linear and triangular structures. Two cesium tellurates, Cs2[Te4O8(OH)10] and Cs2[Te2O4(OH)6], were isolated from the solution at pH 5.5 and 9.2, respectively, and studied by single-crystal X-ray diffractometry, revealing dimeric and tetrameric tellurate anions in corresponding crystal structures.

Fast Quantum Approach for Evaluating the Energy of Non-Covalent Interactions in Molecular Crystals: The Case Study of Intermolecular H-Bonds in Crystalline Peroxosolvates.

Energy/enthalpy of intermolecular hydrogen bonds (H-bonds) in crystals have been calculated in many papers. Most of the theoretical works used non-periodic models. Their applicability for describing intermolecular H-bonds in solids is not obvious since the crystal environment can strongly change H-bond geometry and energy in comparison with non-periodic models. Periodic DFT computations provide a reasonable description of a number of relevant properties of molecular crystals. However, these methods are quite cumbersome and time-consuming compared to non-periodic calculations. Here, we present a fast quantum approach for estimating the energy/enthalpy of intermolecular H-bonds in crystals. It has been tested on a family of crystalline peroxosolvates in which the H∙∙∙O bond set fills evenly (i.e., without significant gaps) the range of H∙∙∙O distances from ~1.5 to ~2.1 Štypical for strong, moderate, and weak H-bonds. Four of these two-component crystals (peroxosolvates of macrocyclic ethers and creatine) were obtained and structurally characterized for the first time. A critical comparison of the approaches for estimating the energy of intermolecular H-bonds in organic crystals is carried out, and various sources of errors are clarified.

Triphenyllead Hydroperoxide: A 1D Coordination Peroxo Polymer, Single-Crystal-to-Single-Crystal Disproportionation to a Superoxo/Hydroxo Complex, and Application in Catalysis.

The synthesis, transformation, and application in catalysis of triphenyllead hydroperoxide, the first dioxygen lead complex, are described. Triphenyllead hydroperoxide is characterized by 207Pb nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and single-crystal X-ray diffraction, revealing the first one-dimensional (1D) coordination peroxo polymer. Photolytic isomorphous transformation of Ph3PbOOH yields a mixed hydroxo/superoxo crystalline structure, the first nonalkali superoxo crystalline metal salt, which is stable up to 100 °C. Upon further photolysis, another isomorphous transformation of the superoxide to hydroxide is observed. These are the first single-crystal-to-single-crystal hydroperoxide-to-superoxide and then to hydroxide transformations reported to date. Photolysis of triphenyllead hydroperoxide yields two forms of superoxide-doped crystalline structures that are distinguished by widely different characteristic relaxation times. The use of Ph3PbOOH as an easy-to-handle solid two-electron oxidant for the highly enantioselective epoxidation of olefins is described.

LC-MS analysis of nitroguanidine compounds by catalytic reduction using palladium modified graphitic carbon nitride catalyst.

The analysis of compounds of the nitroguanidine family at trace level poses an analytical challenge. Nitroguanidine, 1-methyl-3-nitroguanidine, and 1-methyl-3-nitro-1-nitrosoguanidine, which are addressed in this article, have low lipophilicity, with log(Kow) equal to -0.89, - 0.84, and 0.68, respectively, and as such are not amenable for preconcentration from water. Liquid-liquid extraction and SPE fail to concentrate them from water and it is also not possible to extract them by ion exchange resin even after a pH change. Nitroguanidine and 1-methyl-3-nitroguanidine nitramines are explosives of growing use and thereby growing environmental concern due to lower detonation sensitivity compared to RDX. A sensitive method for the determination of nitroguanidine, 1-methyl-3-nitroguanidine, and 1-methyl-3-nitroso-1-nitroguanidine by reduction to the respective amines and subsequent hydrophobization by derivatization with 4-nitrobenzaldehyde followed by LC-ESI-MS analysis is described. Reduction by sodium borohydride using palladium modified graphitic carbon nitride (Pd/g-C3N4) provided improved sensitivity compared to the traditional palladium modified activated carbon due to the lower adsorption of the reduction products on the carbon nitride substrate. The limit of detection of the method was 10 ng L-1 for nitroguanidine, and repeated analyses of spiked effluents and contaminated spring water gave relative standard deviations of 8.8% and 6.5%, respectively. The findings illuminate the great promise of Pd/g-C3N4 as a reduction catalyst for the determination of challenging hydrophilic organic contaminants.

Crystalline Peroxosolvates: Nature of the Coformer, Hydrogen-Bonded Networks and Clusters, Intermolecular Interactions.

Despite the technological importance of urea perhydrate (percarbamide) and sodium percarbonate, and the growing technological attention to solid forms of peroxide, fewer than 45 peroxosolvates were known by 2000. However, recent advances in X-ray diffractometers more than tripled the number of structurally characterized peroxosolvates over the last 20 years, and even more so, allowed energetic interpretation and gleaning deeper insight into peroxosolvate stability. To date, 134 crystalline peroxosolvates have been structurally resolved providing sufficient insight to justify a first review article on the subject. In the first chapter of the review, a comprehensive analysis of the structural databases is carried out revealing the nature of the co-former in crystalline peroxosolvates. In the majority of cases, the coformers can be classified into three groups: (1) salts of inorganic and carboxylic acids; (2) amino acids, peptides, and related zwitterions; and (3) molecular compounds with a lone electron pair on nitrogen and/or oxygen atoms. The second chapter of the review is devoted to H-bonding in peroxosolvates. The database search and energy statistics revealed the importance of intermolecular hydrogen bonds (H-bonds) which play a structure-directing role in the considered crystals. H2O2 always forms two H-bonds as a proton donor, the energy of which is higher than the energy of analogous H-bonds existing in isostructural crystalline hydrates. This phenomenon is due to the higher acidity of H2O2 compared to water and the conformational mobility of H2O2. The dihedral angle H-O-O-H varies from 20 to 180° in crystalline peroxosolvates. As a result, infinite H-bonded 1D chain clusters are formed, consisting of H2O2 molecules, H2O2 and water molecules, and H2O2 and halogen anions. H2O2 can form up to four H-bonds as a proton acceptor. The third chapter of the review is devoted to energetic computations and in particular density functional theory with periodic boundary conditions. The approaches are considered in detail, allowing one to obtain the H-bond energies in crystals. DFT computations provide deeper insight into the stability of peroxosolvates and explain why percarbamide and sodium percarbonate are stable to H2O2/H2O isomorphic transformations. The review ends with a description of the main modern trends in the synthesis of crystalline peroxosolvates, in particular, the production of peroxosolvates of high-energy compounds and mixed pharmaceutical forms with antiseptic and analgesic effects.

Identification of Barium Hydroxo-Hydroperoxostannate Precursor for Low-Temperature Formation of Perovskite Barium Stannate.

A breakthrough "superoxide colloidal solution route" for low-temperature synthesis of barium and strontium stannate perovskites and their doped analogues was recently introduced. The synthesis starts from hydrogen peroxide-rich stannate solutions and yields a so-called "crystalline superoxide molecular cluster" that is converted by low temperature (<300 °C) to the respective perovskites. In this paper, the so-called "crystalline superoxide molecular cluster" is identified as a superoxide-free, barium trihydroxo(hydroperoxo)peroxostannate, BaSn(OH)3(OOH)(OO) phase (BHHPS). EPR and Raman spectroscopy studies reveal the absence of superoxide in this crystalline phase. FTIR of the deuterated sample, 119Sn NMR, and elemental analysis uncovered the empirical formula, H4O7SnBa with two peroxides per each tin element. Rietveld refinement of the XRD confirms the BHHPS cubic phase with replacement of the perovskite oxygen atoms by the OH- and OOH-ligands and peroxobridging groups.

Enhanced Thermal Buffering of Phase Change Materials by the Intramicrocapsule Sub per Mille CNT Dopant.

Microencapsulation of a carbon nanotube (CNT)-loaded paraffin phase change material, PCM in a poly(melamine-formaldehyde) shell, and the respective CNT-PCM gypsum composites is explored. Although a very low level (0.001-0.1 wt %) of intramicrocapsule loading of CNT dopant does not change the thermal conductivity of the solid, it increases the measured effusivity and thermal buffering performance during phase transition. The observed effusivity of 0.05 wt % CNT-doped PCM reaches 4000 W s-0.5 m-2 K-1, which is higher than the reported effusivity of alumina and alumina bricks and an order of magnitude larger than the solid, CNT-free PCM powder. The CNT dopant (0.015 wt %) in a 30 wt % PCM-plaster composite improved the effusivity by 60% compared to the CNT-free composite, whereas the addition of the same amount of CNTs to the bulk of the plaster does not improve either the effusivity or the thermal buffering performance of the composite. The thermal enhancement is ascribed to a CNT network formation within the paraffin core.

Antiferromagnetic Inverse Spinel Oxide LiCoVO4 with Spin-Polarized Channels for Water Oxidation.

Exploring highly efficient catalysts for the oxygen evolution reaction (OER) is essential for water electrolysis. Cost-effective transition-metal oxides with reasonable activity are raising attention. Recently, OER reactants' and products' differing spin configurations have been thought to cause slow reaction kinetics. Catalysts with magnetically polarized channels could selectively remove electrons with opposite magnetic moment and conserve overall spin during OER, enhancing triplet state oxygen molecule evolution. Herein, antiferromagnetic inverse spinel oxide LiCoVO4 is found to contain d7 Co2+ ions that can be stabilized under active octahedral sites, possessing high spin states S = 3/2 (t2g 5 eg 2 ). With high spin configuration, each Co2+ ion has an ideal magnetic moment of 3 µB , allowing the edge-shared Co2+ octahedra in spinel to be magnetically polarized. Density functional theory simulation results show that the layered antiferromagnetic LiCoVO4 studied contains magnetically polarized channels. The average magnetic moment (µave ) per transition-metal atom in the spin conduction channel is around 2.66 µB . Such channels are able to enhance the selective removal of spin-oriented electrons from the reactants during the OER, which facilitates the accumulation of appropriate magnetic moments for triplet oxygen molecule evolution. In addition, the LiCoVO4 reported has been identified as an oxide catalyst with excellent OER activity.

State of the art of tertiary treatment technologies for controlling antibiotic resistance in wastewater treatment plants.

Antibiotic resistance genes (ARGs) have been considered as emerging contaminants of concern nowadays. There are no special technologies designed to directly remove ARGs in wastewater treatment plants (WWTPs). In order to reduce the risk of ARGs, it is vital to understand the efficiency of advanced treatment technologies in removing antibiotic resistance genes in WWTPs. This review highlights the application and efficiency of tertiary treatment technologies on the elimination of ARGs, s, based on an understanding of their occurrence and fate in WWTPs. These technologies include chemical-based processes such as chlorination, ozonation, ultraviolet, and advanced oxidation technology, as well as physical separation processes, biological processes such as constructed wetland and membrane bioreactor, and soil aquifer treatment. The merits, limitations and ameliorative measures of these processes are discussed, with the view to optimizing future treatment strategies and identifying new research directions.

DOM as an indicator of occurrence and risks of antibiotics in a city-river-reservoir system with multiple pollution sources.

Multiple sources contribute to the presence of antibiotic residues in water environments, and the environmental risks caused by antibiotics were paid more and more attention. This work aims to establish a relationship between optical properties of dissolved organic matter (DOM) and sources and risks of antibiotics. Occurrence of antibiotics and DOM in a city-river-reservoir freshwater system containing distinct antibiotic sources was investigated during three seasons using LC-MS and fluorescence excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC), respectively. The results showed that antibiotics and DOM in the water had trends of increasing levels from the upstream to the midstream in the system. Five classes of antibiotics had statistically significant correlations with the humic-like component (C3) in the water (Pearson, p < 0.05). Especially, norfloxacin (NFX), which was dominant in the aquaculture source, significantly increased the fluorescence of C3 according to the fluorescence titration (R2 = 0.86, p < 0.01). Furthermore, fluorescence signature in the aquaculture pond posed broad humic acid-like peaks with relatively higher abundances compared to other areas. These results suggested that C3 could be recognized as an indicator of NFX from aquaculture sources. Meanwhile, C3 can largely account for ecological risks of tetracyclines according to the results of redundancy analysis. This work highlights the roles of EEM-PARAFAC on tracing the source of antibiotics and the correlations between environmental risks of antibiotics and DOM in the aquatic environment.

Crystalline Ammonium Peroxogermanate as a Waste-Free, Fully Recyclable Versatile Precursor for Germanium Compounds.

High, nearly 100%, yield synthesis of ammonium peroxogermanate (APG), (NH4)6[Ge6(µ-OO)6(µ-O)6(OH)6]·6H2O, is presented, and its crystal structure is determined by single crystal X-ray study. It comprises centrosymmetric hexanuclear peroxogermanate anions [Ge6(µ-OO)6(µ-O)6(OH)6]6- with six µ-oxo- and six µ-peroxo groups forming negatively charged layers. The space between these layers is filled by ammonium cations and water molecules, forming a highly stable structure due to hydrogen bonding. Highly soluble macroporous amorphous germanium oxide (HSGO) is then synthesized by mild treatment of APG. The compound forms highly oversaturated metastable germanium oxide solution with a solubility of 100 g/L, over 20 times higher than the solubility of amorphous germanium oxide. HSGO solution is a versatile reagent that can react with basic and acidic reagents to give a diverse range of salts including, e.g., germanium sulfide, germanium hydrophosphate, and potassium germanate. In the absence of acid or base, the aqueous HSGO solution yields hexagonal germanium oxide under ambient conditions.

Vanadium Oxide Thin Film Formation on Graphene Oxide by Microexplosive Decomposition of Ammonium Peroxovanadate and Its Application as a Sodium Ion Battery Anode.

Formation of vanadium oxide nanofilm-coated graphene oxide (GO) is achieved by thermally induced explosive disintegration of a microcrystalline ammonium peroxovanadate-GO composite. GO sheets isolate the microcrystalline grains and capture and contain the microexplosion products, resulting in the deposition of the nanoscale products on the GO. Thermal treatment of the supported nanofilm yields a sequence of nanocrystalline phases of vanadium oxide (V3O7, VO2) as a function of temperature. This is the first demonstration of microexplosive disintegration of a crystalline peroxo compound to yield a nanocoating. The large number of recently reported peroxide-rich crystalline materials suggests that the process can be a useful general route for nanofilm formation. The V3O7@GO composite product was tested as a sodium ion battery anode and showed high charge capacity at high rate charge-discharge cycling (150 mAh g-1 at 3000 mA g-1 vs 300 mAh g-1 at 100 mA g-1) due to the nanomorphology of the vanadium oxide.

Understanding Fundamentals and Reaction Mechanisms of Electrode Materials for Na-Ion Batteries.

Development of efficient, affordable, and sustainable energy storage technologies has become an area of interest due to the worsening environmental issues and rising technological dependence on Li-ion batteries. Na-ion batteries (NIBs) have been receiving intensive research efforts during the last few years. Owing to their potentially low cost and relatively high energy density, NIBs are promising energy storage devices, especially for stationary applications. A fundamental understanding of electrode properties during electrochemical reactions is important for the development of low cost, high-energy density, and long shelf life NIBs. This Review aims to summarize and discuss reaction mechanisms of the major types of NIB electrode materials reported. By appreciating how the material works and the fundamental flaws it possesses, it is hoped that this Review will assist readers in coming up with innovative solutions for designing better materials for NIBs.

Optimal Remediation Scheme for a Wastewater Recharge Site: Contaminants Fate and Transport Model.

A 3-dimensional hydrologic groundwater flow and contaminant transport model was developed to address the feasibility and relevant time-scales for remediation of a large soil aquifer treatment (SAT) site for domestic wastewater. The model accounted for a range of organic pollutant retardation factors and biodegradation kinetics. In order to detect the effect of the most retained and the most refracted/recalcitrant pollutants, it was crucial to model fractions of different properties rather than with average set properties. Four aquifer remediation scenarios, including two active washing procedures and two involving natural attenuation, were evaluated. The remediation efficiencies, in terms of residual plume size and mass of pollutant washout, were compared to each other and to the current operation scheme. According to the results, remediation mainly via natural attenuation rather than some form of intense pump and treat technology, is feasible, unlike the situation with hazardous waste sites. Enforced washout becomes less efficient with time due to increasing retardation of the residual pollutants. Therefore, pollution containment with natural biodegradation, which removed 95% of the emerging contaminants within 30 to 40 years was found to be the most valuable remediation scheme.

Emerging organic pollutants in the vadose zone of a soil aquifer treatment system: Pore water extraction using positive displacement.

Trace organic compounds in effluents, water streams and aquifers are amply reported. However, the mobile pool of Emerging Organic Contaminants (EOCs) in the deep parts of the vadose zone is hard to estimate, due to difficulties in extraction of sufficient quantity of pore water. Here, we present a new methodology for depth profiling of EOCs in pore water by Positive Displacement Extraction (PDE): Pore water extraction from unsaturated soil samples is carried out by withdrawal of soil cores by direct-push drilling and infiltrating the core by organics free water. We show that EOC concentrations in the water eluted in the plateau region of the inverse breakthrough curve is equal to their pore water concentrations. The method was previously validated for DOC extraction, and here the scope of the methodology is extended to pore water extraction for organic pollutants analysis. Method characteristics and validation were carried out with atrazine, simazine, carbamazepine, venlafaxine, O-desmethylvenlafaxine and caffeine in the concentration range of several ng to several µg/liter. Validation was carried out by laboratory experiments on three different soils (sandy, sandy-clayey and clayey). Field studies in the vadose zone of a SAT system provided 27 m deep EOC profiles with less than 1.5 m spatial resolution. During the percolation treatment, carbamazepine remained persistent, while the other studied EOCs were attenuated to the extent of 50-99%.The highest degradation rate of all studied EOCs was in the aerobic zone. EOC levels based on PDE and extraction by centrifugation were compared, showing a positive bias for centrifugation.

Synthesis of high volumetric capacity graphene oxide-supported tellurantimony Na- and Li-ion battery anodes by hydrogen peroxide sol gel processing.

High-charge-capacity sodium-ion battery anodes made of Sb2Te3@reduced graphene oxide are reported for the first time. Uniform nano-coating of graphene oxide is carried out from common sol of peroxotellurate and peroxoantimonate under room temperature processing. Reduction by hydrazine under glycerol reflux yields Sb2Te3@reduced graphene oxide. The electrodes exhibit exceptionally high volumetric charge capacity, above 2300mAhcm-3 at 100mAg-1 current density, showing very good rate capabilities and retaining 60% of this capacity even at 2000mAg-1. A comparison of sodiation and lithiation shows that lithiation exhibits better volumetric charge capacity, but surprisingly only marginally better relative rate capability retention at 2000mAg-1. Tellurium-based electrodes are attractive due to the high volumetric charge capacity of Te, its very high electric conductivity, and the low relative expansion upon lithiation/sodiation.