ABSTRACT
The composites containing various iron compounds and highly microporous carbon spheres were produced and investigated for structural and magnetic properties. Iron citrate, nitrate and chloride were used to prepare samples and the obtained products contained iron, iron carbide or magnetite. All the produced samples were characterized by high porosity and good magnetic properties. The coupling of the high porosity of carbon spheres with magnetic properties of iron compounds provides a potential application of the composites to removal of impurities from water, followed by a magnetic separation of the sorbent.
ABSTRACT
We present the study of pristine and calcined f-MWCNTs functionalized by nitrogen-containing functional groups. We focus on the structural and microstructural modification tuned by the previous annealing. However, our primary goal was to analyze the electronic structure and magnetic properties in relation to the structural properties using a multi-technique approach. The studies carried out by X-ray diffraction, XPS, and 57Fe Mössbauer spectrometry revealed the presence of γ-Fe nanoparticles, Fe3C, and α-FeOOH as catalyst residues. XPS analysis based on the deconvolution of core level lines confirmed the presence of various nitrogen-based functional groups due to the purification and functionalization process of the nanotubes. The annealing procedure leads to a structural modification mainly associated with removing surface impurities as purification residues. Magnetic studies confirmed a significant contribution of Fe3C as evidenced by a Curie temperature estimated at TC = 452 ± 15 K. A slight change in magnetic properties upon annealing was revealed. The detailed studies performed on nanotubes are extremely important for the further synthesis of composite materials based on f-MWCNTs.
ABSTRACT
Thermal treatment is a post-synthesis treatment that aims to improve the crystallinity and interrelated physical properties of as-prepared materials. This process may also cause some unwanted changes in materials like their oxidation or contamination. In this work, we present the post-synthesis annealing treatments of the amorphous Fe1-xCox (x = 0.25; 0.50; 0.75) Wire-like nanochains performed at 400 °C in two different atmospheres, i.e., a mixture of 80% nitrogen and 20% hydrogen and argon. These processes caused significantly different changes of structural and magnetic properties of the initially-formed Fe-Co nanostructures. All of them crystallized and their cores were composed of body-centered cubic Fe-Co phase, whereas their oxide shells comprised of a mixture of CoFe2O4 and Fe3O4 phases. However, the annealing carried out in hydrogen-containing atmosphere caused a decomposition of the initial oxide shell layer, whereas a similar process in argon led to its slight thickening. Moreover, it was found that the cores of thermally-treated Fe0.25Co0.75 nanochains contained the hexagonal closest packed (hcp) Co phase and were covered by the nanosheet-like shell layer in the case of annealing performed in argon. Considering the evolution of magnetic properties induced by structural changes, it was observed that the coercivities of annealed Fe-Co nanochains increased in comparison with their non-annealed counterparts. The saturation magnetization (MS) of the Fe0.25Co0.75 nanomaterial annealed in both atmospheres was higher than that for the non-annealed sample. In turn, the MS of the Fe0.75Co0.25 and Fe0.50Co0.50 nanochains annealed in argon were lower than those recorded for non-annealed samples due to their partial oxidation during thermal processing.
ABSTRACT
The Dzyaloshinskii-Moriya interaction (DMI) manifesting in asymmetric layered ferromagnetic films gives rise to non-colinear spin structures stabilizing magnetization configurations with nontrivial topology. In this work magnetization reversal, magnetic domain alignment, and strength of DMI are related to the crystalline structure of W/Co/Pt multilayers grown by molecular beam epitaxy. The applied growth method enables the fabrication of layered systems with higher crystalline quality than commonly applied sputtering techniques. A relatively high value of the D coefficient was determined from the aligned magnetic domain stripe structure, substantially exceeding 2 mJ m-2. The highest value of DMI strength Deff = 2.64 mJ m-2 and surface DMI parameter DS = 1.83 pJ m-1 have been observed for a repetition number equal to 10. The experimental results correlate exactly with those obtained from the micromagnetic modelling and density functional theory calculations performed for the well-defined layered stacks. This high value of DMI strength originates from the additive contributions of the interfacial atomic Co layers at the two types of interfaces.
ABSTRACT
Magnetic silver nanoparticles (MNPAg) are interesting nanotechnology materials with borderless environmental science, that can be used to disinfect water contaminated with pathogenic bacteria. The use of MNPAg leads to increased risk of nanomaterial contamination in the environment, especially natural water sources, with harmful effects on the ecosystem. This study investigating survival and enzyme activity of magnetic O-carboxymethylchitosan loaded silver nanoparticle on Artemia salina. The results showed that mortality increased with increasing concentrations of MNPAg. O-Carboxymethylchitosan loaded silver nanoparticles were found to be more toxic, with a LC50 of 902.1 mg/L for γ-Fe2O3/Ag without reducing agent. Accumulation of silver on Artemia salina depends on the type of nanoparticle. Accumulation of nanoparticle containing polymers (carboxymethylchitosan/γ-Fe2O3/Ag without reducing agent, carboxymethylchitosan/γ-Fe2O3/Ag reduced with sucrose and carboxymethylchitosan/γ-Fe2O3/Ag reduced with NaBH4) were found to be higher than γ-Fe2O3/Ag reduced with NaBH4, γ-Fe2O3/Ag reduced with sucrose and γ-Fe2O3/Ag without reducing agent under the same experimental conditions. The antioxidant enzyme (CAT, SOD and GST) activities increased slightly following exposure, indicating that the toxic effects are related to oxidative stress. The combined results so far indicate that MNPA does not have the potential to affect aquatic organisms when released into the ecosystem.
Subject(s)
Chitosan/analogs & derivatives , Metal Nanoparticles/toxicity , Silver/toxicity , Water Pollutants, Chemical/toxicity , Animals , Artemia/physiology , Chitosan/toxicityABSTRACT
The main goal of this work is to study the structural and magnetic properties of iron nanowires and iron nanoparticles, which have been fabricated in almost the same processes. The only difference in the synthesis is an application of an external magnetic field in order to form the iron nanowires. Both nanomaterials have been examined by means of transmission electron microscopy, energy dispersive X-ray spectrometry, X-ray diffractometry and Mössbauer spectrometry to determine their structures. Structural investigations confirm that obtained iron nanowires as well as nanoparticles reveal core-shell structures and they are composed of crystalline iron cores that are covered by amorphous or highly defected phases of iron and iron oxides. Magnetic properties have been measured using a vibrating sample magnetometer. The obtained values of coercivity, remanent magnetization, saturation magnetization as well as Curie temperature differ for both studied nanostructures. Higher values of magnetizations are observed for iron nanowires. At the same time, coercivity and Curie temperature are higher for iron nanoparticles.
