On-Surface Metathesis of an Ionic Liquid on Ag(111).

We investigated the adsorption, surface enrichment, ion exchange, and on-surface metathesis of ultrathin mixed IL films on Ag(111). We stepwise deposited 0.5 ML of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) and 1.0 ML of the aprotic IL 1-methyl-3-octylimidazolium hexafluorophosphate ([C8 C1 Im][PF6 ]) at around 90 K. Thereafter, the resulting layered frozen film was heated to 550 K, and the thermally induced phenomena were monitored in situ by angle-resolved X-ray photoelectron spectroscopy. Between 135 and 200 K, [TfO]- anions at the Ag(111) surface are exchanged by [PF6 ]- anions and enriched together with [C8 C1 Im]+ cations at the IL/vacuum interface. Upon further heating, [dema][PF6 ] and [OMIm][PF6 ] desorb selectively at ∼235 and ∼380 K, respectively. Hereby, a wetting layer of pure [C8 C1 Im][TfO] is formed by on-surface metathesis at the IL/metal interface, which completely desorbs at ∼480 K. For comparison, ion enrichment at the vacuum/IL interface was also studied in macroscopic IL mixtures, where no influence of the solid support is expected.

Time- and Temperature-Dependent Growth Behavior of Ionic Liquids on Au(111) Studied by Atomic Force Microscopy in Ultrahigh Vacuum.

We deposited defined amounts of [C1C1Im][Tf2N] on Au(111) at different temperatures and investigated the morphology and wetting behavior of the deposited films by atomic force microscopy. For multilayer coverages, we observe a drastically different growth behavior when comparing deposition at room temperature (RT) and deposition below 170 K followed by slow annealing to RT. Upon deposition at RT, we find the formation of 2-30 nm high and 50-500 nm wide metastable 3D droplets on top of a checkerboard-type wetting layer. These droplets spread out into stable 2D bilayers, on the time scale of hours and days. The same 2D bilayer structure is obtained after deposition below 170 K and slow annealing to RT. We present a statistical analysis on the time-dependent changes of the shape and volume of the 3D droplets and the 2D bilayers. We attribute the stabilization of the 2D bilayers on the wetting layer and on already formed bilayers to the high degree of order in these layers. Notably, the transformation process from the 3D droplets to 2D bilayer islands is accelerated by tip effects and also X-ray radiation.

Adsorption, Wetting, Growth, and Thermal Stability of the Protic Ionic Liquid Diethylmethylammonium Trifluoromethanesulfonate on Ag(111) and Au(111).

We have studied the adsorption, wetting, growth, and thermal evolution of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) on Au(111) and Ag(111). Ultrathin films were deposited at room temperature (RT) and at 90 K, and were characterized in situ by angle-resolved X-ray photoelectron spectroscopy. For both surfaces, we observe that independent of temperature, initially, a closed 2D wetting layer forms. While the film thickness does not increase past this wetting layer at RT, at 200 K and below, "moderate" 3D island growth occurs on top of the wetting layer. Upon heating, on Au(111), the [dema][TfO] multilayers desorb at 292 K, leaving an intact [dema][TfO] wetting layer, which desorbs intact at 348 K. The behavior on Ag(111) is much more complex. Upon heating [dema][TfO] deposited at 90 K, the [dema]+ cations deprotonate in two steps at 185 and 305 K, yielding H[TfO] and volatile [dema]0. At 355 K, the formed H[TfO] wetting layer partly desorbs (∼50%) and partly decomposes to form an F-containing surface species, which is stable up to 570 K.

On the adsorption of n-butane on alkyl imidazolium ionic liquids with different anions using a new molecular beam setup.

The adsorption of reactants is an elementary step in the interaction of molecules with liquid or solid surfaces. We recently reported on the trapping of n-butane on the frozen surfaces of ionic liquids (ILs), namely, 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([CnC1Im][Tf2N]; n = 1, 2, 3, and 8). To study the influence of the anion, we now present results concerning the trapping of n-butane on 1-alkyl-3-methylimidazolium hexafluorophosphate ILs ([CnC1Im][PF6]; n = 2, 4, and 8), that is, ILs with a smaller anion. The adsorption energies close to zero coverage are determined from the temperature dependence of the initial trapping probability using a novel approach. For both groups of ILs, the binding energy is dominated by the interaction of n-butane with the alkyl chain of the cation, whereas the ionic headgroups contribute only weakly. Comparing ILs with different alkyl chains at the IL cation, we find that the adsorption strength of n-butane increases with increasing length of the alkyl chain. In addition, detailed information on the new setup and the data analysis is provided.

Growth of Multilayers of Ionic Liquids on Au(111) Investigated by Atomic Force Microscopy in Ultrahigh Vacuum.

Understanding the growth of ultrathin films of ionic liquids (ILs) on metal surfaces is of highest relevance for a variety of applications. We present a detailed study of the growth of the wetting layer and successive multilayers of 1,3-dimethylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C1C1Im][Tf2N]) on Au(111). By atomic force microscopy (AFM) in ultrahigh vacuum, we follow the temperature-dependent behavior between 110 and 300 K at defined coverages. We initially observe the formation of a wetting layer with a thickness of ∼0.37 nm with anions and cations arranged in a checkerboard structure. Stable AFM imaging up to 280 K allows us to follow the IL growing on top of the wetting layer in bilayers with an average thickness of ∼0.71 nm, that is, double the height of the wetting layer, in a bilayer-by-bilayer fashion. This growth behavior is independently confirmed from the surface morphology, as deduced from AFM and angle-resolved X-ray photoelectron spectroscopy. High-resolution AFM images at 110 K allow for identifying the molecular surface structure of the bilayers as a striped phase, which is one of the phases also seen for the wetting layer (Meusel, M.; Lexow, M.; Gezmis, A.; Schotz, S.; Wagner, M.; Bayer, A.; Maier, F.; Steinrück, H. P. Atomic Force and Scanning Tunneling Microscopy of Ordered Ionic Liquid Wetting Layers from 110 K up to Room Temperature. ACS Nano 2020, 14, 9000-9010).

Atomic Force and Scanning Tunneling Microscopy of Ordered Ionic Liquid Wetting Layers from 110 K up to Room Temperature.

Ionic liquids (ILs) are used as ultrathin films in many applications. We studied the nanoscale arrangement within the first layer of 1,3-dimethylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C1C1Im] [Tf2N]) on Au(111) between 400 and 110 K in ultrahigh vacuum by scanning tunneling and noncontact atomic force microscopy with molecular resolution. Compared to earlier studies on similar ILs, a different behavior is observed, which we attribute to the small size and symmetrical shape of the cation: (a) In both AFM and STM only the anions are imaged; (b) only long-range-ordered but no amorphous phases are observed; (c) the hexagonal room-temperature phase melts 30-50 K above the IL's bulk melting point; (d) at 110 K, striped and hexagonal superstructures with two and three ion pairs per unit cell, respectively, are found. AFM turned out to be more stable at higher temperature, while STM revealed more details at low temperature.

On the Dynamic Interaction of n-Butane with Imidazolium-Based Ionic Liquids.

The impact of a reactant from the gas phase on the surface of a liquid and its transfer through this gas/liquid interface are crucial for various concepts applying ionic liquids (ILs) in catalysis. We investigated the first step of the adsorption dynamics of n-butane on a series of 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([Cn C1 Im][Tf2 N]; n=1, 2, 3, 8). Using a supersonic molecular beam in ultra-high vacuum, the trapping of n-butane on the frozen ILs was determined as a function of surface temperature, between 90 and 125 K. On the C8 - and C3 -ILs, n-butane adsorbs at 90 K with an initial trapping probability of ≈0.89. The adsorption energy increases with increasing length of the IL alkyl chain, whereas the ionic headgroups seem to interact only weakly with n-butane. The absence of adsorption on the C1 - and C2 -ILs is attributed to a too short residence time on the IL surface to form nuclei for condensation even at 90 K.

Temperature-Dependent Surface Enrichment Effects in Binary Mixtures of Fluorinated and Non-Fluorinated Ionic Liquids.

Using angle-resolved X-ray photoelectron spectroscopy (ARXPS), we investigate the topmost nanometers of various binary ionic liquid (IL) mixtures at different temperatures in the liquid state. The mixtures consist of ILs with the same [PF6 ]- anion but two different cations, namely 3-methyl-1-(3,3,4,4,4-pentafluorobutyl)imidazolium hexafluorophosphate, [PFBMIm][PF6 ], and 1-butyl-3-methylimidazolium hexafluorophosphate, [C4 C1 Im][PF6 ], with 10, 25, 50 and 75 mol % content of [PFBMIm][PF6 ]. We observe a preferential enrichment of the fluorinated chain in the topmost layer, relative to the bulk composition, which is most pronounced for the lowest content of [PFBMIm][PF6 ]. Upon cooling the mixtures stepwise from 95 °C until surface charging effects in XPS indicate solidification, we observe a pronounced increase in surface enrichment of the fluorinated chain with decreasing temperature in the liquid state. In contrast to the mixtures with lower [PFBMIm][PF6 ] contents, cooling the 75 mol % mixture additionally shows an abrupt decrease of the fluorinated chain signal before complete solidification occurs, which is assigned to partial precipitation effects.

Stability and Exchange Processes in Ionic Liquid/Porphyrin Composite Films on Metal Surfaces.

In light of increasing interest in the development of organic-organic multicomponent heterostructures on metals, this molecular-scale study investigates prototypical composite systems of ultrathin porphyrin and ionic liquid (IL) films on metallic supports under well-defined ultrahigh vacuum conditions. By means of angle-resolved X-ray photoelectron spectroscopy, we investigated the adsorption, stability, and thermal exchange of the resulting films after sequential physical vapor deposition of the free-base porphyrin 5,10,15,20-tetraphenylporphyrin, 2H-TPP, and the IL 1-methyl-3-octylimidazolium hexafluorophosphate, [C8C1Im][PF6], on Ag(111) and Au(111). 2H-TPP shows two-dimensional growth of up to two closed molecular layers on Ag(111) and Au(111) and three-dimensional island growth for thicker films. IL films on top of a monolayer of 2H-TPP exhibit Stranski-Krastanov-like growth and are stable up to 385 K. The 2H-TPP layer leads to destabilization of the IL films, compared to the IL in direct contact with the bare metals, by inhibiting the specific adsorption of the ions on the metal surfaces. When the porphyrin is deposited on top of [C8C1Im][PF6] at low temperature, the 2H-TPP molecules adsorb on top of the IL film at first but replace the IL at the IL/metal interfaces upon heating above 240 K. This exchange process is most likely driven by the higher adsorption energy of 2H-TPP on Ag(111) and Au(111) surfaces, as compared to the IL. The behavior observed on Ag(111) and Au(111) is identical. The results are highly relevant for the stability of porphyrin/IL-based thin film catalyst systems and molecular devices, and more generally, stacked organic multilayer architectures.

Reactions of a Polyhalide Ionic Liquid with Copper, Silver, and Gold.

The reactions of copper, silver, and gold with the imidazolium-based polyhalide ionic liquid (IL) [C6C1Im][Br2I] were investigated by using X-ray photoelectron spectroscopy (XPS), weight-loss measurements, and gas-phase mass spectrometry. All three Group 11 metals are strongly corroded by the IL at moderate temperatures to give a very high content of dissolved CuI, AgI, and AuI species. The IL-metal solutions are stable against contact with water and air. The replacement of imidazolium with inorganic sodium cations decreased metal corrosion rates by orders of magnitude. Our results clearly indicate metal oxidation by iodide from dibromoiodide anions to form molecular iodine and anionic [Br-MI-Br]- (M=Cu, Ag, Au) complexes stabilized by imidazolium counterions. From experiments with a trihalide IL with imidazolium methylated at the 2-position, we ruled out the formation of imidazole-carbene as a cause of the observed corrosion. In contrast to Group 11 metals, molybdenum is inert against the trihalide IL, which is attributed to surface passivation.

Cation Exchange at the Interfaces of Ultrathin Films of Fluorous Ionic Liquids on Ag(111).

In the context of applications with thin ionic liquid (IL) films on solid supports, we studied the ion distribution within mixed thin IL films by angle-resolved X-ray photoelectron spectroscopy. After the deposition of 1-methyl-3-octylimidazolium hexafluorophosphate, [C8C1Im][PF6], on top of a wetting layer (WL) of 3-methyl-1-(3,3,4,4,4-pentafluorobutyl)imidazolium hexafluorophosphate, [PFBMIm][PF6], on Ag(111) at room temperature (RT), we find a preferential enrichment of the [PFBMIm]+ cation at the IL/vacuum interface. In a similar deposition experiment at 82 K, this cation exchange at the IL/solid interface does not occur. Upon heating the film from 82 K to RT, we observe the replacement of [C8C1Im]+ by [PFBMIm]+ at the IL/vacuum interface between ∼160 and ∼220 K. No further changes in the surface composition were observed between 220 K and RT. Upon further heating the mixed IL film, we find the complete desorption of [PFBMIm][PF6] from the mixed film below 410 K, leaving a WL of pure [C8C1Im][PF6] on Ag(111), which desorbs until 455 K.

Anion Exchange at the Liquid/Solid Interface of Ultrathin Ionic Liquid Films on Ag(111).

Thin ionic liquid (IL) films play an important role in many applications. To obtain a better understanding of the ion distribution within IL mixture films, we sequentially deposited ultrathin layers of two ILs with the same cation but different anions onto Ag(111), and monitored their dynamic behaviour by angle-resolved X-ray photoelectron spectroscopy. Upon depositing [C8 C1 Im][PF6 ] on top of a wetting layer of [C8 C1 Im][Tf2 N] at room temperature (RT), we found a pronounced enrichment of the [Tf2 N]- anions at the IL/vacuum interface, due to a rapid anion exchange at the IL/solid interface. In contrast, at 90 K, the [Tf2 N]- anions remain at the IL/solid interface. Upon heating, we observe a rearrangement of the cations between 140 and 160 K, such that the octyl chains preferentially point towards the vacuum. Above 170 K, the ions start to become mobile, and at 220 K, the anion exchange is completed, with the [Tf2 N]- anions enriched at the IL/vacuum interface in the same way as found for deposition at RT. The temperature range for the anion exchange corresponds well to glass transition temperatures reported in literature. We propose two driving forces to be cooperatively responsible for the replacement/exchange of [Tf2 N]- at the IL/solid interface and its enrichment at the IL/vacuum interface. First, the adsorption energy of [C8 C1 Im][PF6 ] is significantly larger than that of [C8 C1 Im][Tf2 N], and second, the surface tension of [C8 C1 Im][Tf2 N] is lower than that of [C8 C1 Im][PF6 ].

Time-dependent changes in the growth of ultrathin ionic liquid films on Ag(111).

Various amounts of the ionic liquids (ILs) [C1C1Im][Tf2N] and [C8C1Im][Tf2N] were deposited in vacuo by physical vapour deposition (PVD) on single crystalline Ag(111) at room temperature and subsequently monitored by angle-resolved X-ray photoelectron spectroscopy (ARXPS) as a function of time. For very low coverages of up to one closed molecular layer, an initial wetting layer was rapidly formed for both ILs. Deposition of higher amounts of [C1C1Im][Tf2N] revealed an initial three-dimensional film morphology. On the time scale of hours, characteristic changes of the XPS signals were observed. These are interpreted as island spreading and a transformation towards a nearly two dimensional [C1C1Im][Tf2N] film as the final state. In contrast, a film morphology close to 2D was found from the very beginning for [C8C1Im][Tf2N] deposited on Ag(111) demonstrating the influence of the alkyl chain length on the growth kinetics. These studies also highlight the suitability of time-resolved ARXPS for the investigation of IL/solid interfaces, which play a crucial role in IL thin film applications such as in catalysis, sensor, lubrication, and coating technologies.